Search results for "Polyethylene terephthalate"
showing 10 items of 37 documents
Evolution of the sp2 content and revealed multilayer growth of amorphous hydrogenated carbon (a-C:H) films on selected thermoplastic materials
2017
Amorphous hydrogenated carbon (a-C:H) films were gradually deposited on high-density polyethylene (HDPE), polyethylene terephthalate (PET) and polyoxymethylene (POM) via an indirect (f-type) and a direct (r-type) plasma-enhanced chemical vapor deposition (PECVD) process with acetylene plasma. The surface morphologies of the thicker r-depositions on the three different thermoplastics have been analyzed by atomic force microscopy (AFM) at varying micrometer scales. Absorbance spectroscopy has been used to characterize the optical properties of all coatings. Intrinsic stress release phenomena are revealed on thicker layers through the detection of characteristic surface corrugations. Based on …
Morphology, Rheological and Mechanical Properties of Isotropic and Anisotropic PP/rPET/GnP Nanocomposite Samples
2021
The effect of graphene nanoplatelets (GnPs) on the morphology, rheological, and mechanical properties of isotropic and anisotropic polypropylene (PP)/recycled polyethylene terephthalate (rPET)-based nanocomposite are reported. All the samples were prepared by melt mixing. PP/rPET and PP/rPET/GnP isotropic sheets were prepared by compression molding, whereas the anisotropic fibers were spun using a drawing module of a capillary viscometer. The results obtained showed that the viscosity of the blend is reduced by the presence of GnP due to the lubricating effect of the graphene platelets. However, the Cox–Merz rule is not respected. Compared to the PP/rPET blend, the GnP led to a slight incre…
Elasticity and long-term behavior of recycled polyethylene terephthalate (rPET)/montmorillonite (MMT) composites
2014
Abstract Recycled polyethylene terephthalate (rPET) nanocomposites with various amounts of montmorillonite clay (MMT) have been manufactured by using twin screw extrusion. By rising MMT weight content Wf up to 1 wt.% it is possible to increase yield strength and ultimate strength of the composite by 17% and 27% respectively in comparison to neat rPET. Introduction of MMT in the rPET leads also to considerable increase of the modulus of elasticity E. Relationship E(Wf), however, is non-linear and is characterized by slow-down in E growth along with increasing MMT content. At low nanofiller content experimental results are sufficiently well described by using the method of Mori–Tanaka and the…
The solidification behavior of a PBT/PET blend over a wide range of cooling rate
2009
In recent years, much attention has been paid to the development of high-performance polyester blends, among which blends of polybutylene terephthalate/polyethylene terephthalate (PBT/PET) are expected to exhibit remarkable properties as far as their crystallization behavior is concerned. Through trial and error, appropriate commercial compositions have been chosen which could not be otherwise explained by a suitable interpretation of the mechanisms determining their solidification behavior. The solidification behavior of a 60/40 w/w PBT/PET blend was studied in a wide range of cooling conditions, according to a continuous cooling transformation (CCT) procedure developed previously, aiming …
Influence of small amounts of polyvinylchloride on the recycling of polyethyleneterephthalate
1999
Abstract Polyethylene terephthalate (PET), and polyvinyl chloride (PVC), are commonly encountered in plastics stream coming from separate collections of plastic bottles. The presence of PVC in the recycled PET is very dangerous because of the chain scission provoked by the hydrogen chloride evolved from the macromolecules during degradation of PVC. Recycled PET must be free of PVC; contents of PVC as little as 100 ppm can induce degradation and discoloration of the polyester. PET, in its turn, is degraded when the processing is carried out in the presence of water. In previous work, however, the degradation of PET was eliminated and rather an increase of the molecular weight has been measur…
Thin-shell plastic lenses for space and laboratory applications
2004
We have identified an inexpensive, readily available, mechanically stable, extremely smooth, elastic, and mechanically uniform plastic suitable for thin film X-ray optics. Polyethylene terephthalate (PET) is easily deformed without losing its elastic properties or surface smoothness. Most important, PET can be coated with mono- or multilayers that reflect X-rays at grazing incidence. We have used these properties to produce X-ray optics made either as a concentric nest of cylinders or as a spiral. We have produced accurately formed shells in precisely machined vacuum mandresl or used a pin and wheel structure to form a continuously wound spiral. The wide range of medical, industrial and sci…
Morphological and Chemical Evolution of Gradually Deposited Diamond-Like Carbon Films on Polyethylene Terephthalate: From Subplantation Processes to …
2016
Diamond-like carbon (DLC) films on polyethylene terephthalate (PET) are nowadays intensively studied composites due to their excellent gas barrier properties and biocompatibility. Despite their applicative features being highly explored, the interface properties and structural film evolution of DLC coatings on PET during deposition processes are still sparsely investigated. In this study two different types of DLC films were gradually deposited on PET by radio frequency plasma-enhanced chemical vapor deposition (RF-PECVD) using acetylene plasma. The surface morphology of the deposited samples has been analyzed by atomic force microscopy (AFM). Their chemical composition was investigated by …
Ionic Transport through Chemically Functionalized Hydrogen Peroxide-Sensitive Asymmetric Nanopores
2015
We describe the fabrication of a chemical-sensitive nanofluidic device based on asymmetric nanopores whose transport characteristics can be modulated upon exposure to hydrogen peroxide (H2O2). We show experimentally and theoretically that the current-voltage curves provide a suitable method to monitor the H2O2-mediated change in pore surface characteristics from the electronic readouts. We demonstrate also that the single pore characteristics can be scaled to the case of a multipore membrane whose electric outputs can be readily controlled. Because H2O2 is an agent significant for medical diagnostics, the results should be useful for sensing nanofluidic devices.
Current rectification by nanoparticle blocking in single cylindrical nanopores.
2014
Blocking of a charged pore by an oppositely charged nanoparticle can support rectifying properties in a cylindrical nanopore, as opposed to the usual case of a fixed asymmetry in the pore geometry and charge distribution. We present here experimental data and model calculations to confirm this fundamental effect. The nanostructure imaging and the effects of nanoparticle concentration, pore radius, and salt concentration on the electrical conductance–voltage (G–V) curves are discussed. Logic responses based on chemical and electrical inputs/outputs could also be implemented with a single pore acting as an effective nanofluidic diode. To better show the generality of the results, different ch…
Evaluation of the healing of precoated vascular dacron prostheses.
1991
Knitted and woven Dacron grafts commercially coated with bovine collagen, gelatin and human albumin were implanted end-to-side between the infrarenal aorta and the bifurcation in 35 growing pigs. Grafts were explanted after 4, 8 and 12 weeks and compared to 6 uncoated knitted prostheses preclotted with blood that served as a control. Uncoated grafts rapidly developed a firmly attached neointima lined with endothelium. Compared with coated grafts the thrombus-free area of uncoated grafts was significantly larger (P less than 0.05). The slow resorption of albumin resulted in a delayed and incomplete neointimal healing and failing graft incorporation. Although the bovine collagen was only mini…