Search results for "Polymer Blends"

Oxazoline functionalization of polyethylenes and their blends with polyamides and polyesters

2001

The compatibilization of blends of polyamide-6 (PA6) with linear low density polyethylene (LLDPE) and of poly(ethylene terephthalate) (PET) with high density polyethylene (HDPE), by functionalization of the polyethylenes with oxazoline groups was investigated. Chemical modification of LLDPE and HDPE was carried out by melt free radical grafting with ricinoloxazoline maleinate. Blends preparation was made either with a two-steps procedure comprising functionalization and blending, and in a single step in which the chemical modification of polyethylene with the oxazoline monomer was realized in situ, during blending. The characterization of the products was carried out by FTIR spectroscopy an…

Effect of adding new phosphazene compounds to poly(butylene terephthalate)/polyamide blends. I: Preliminary study in a batch mixer

2005

Abstract Poly(butylene terephthalate) (PBT) and a sample of polyamide have been melt processed in the presence of two new phosphazene compounds, namely 2,2-dichloro-4,4,6,6-bis[spiro(2′,2″dioxy-1′,1″biphenyl)]cyclotriphosphazene (2Cl-CP) and 2,2-bis-(2-methoxy-4-methyleneoxy-phenoxy)-4,4,6,6,-bis[spiro(2′,2″dioxy-1′,1″biphenyl)]cyclophosphazene (CP-2EPOX). The blends were prepared by using polyamide 6 (PA6) at 25/75 w/w and 75/25 w/w composition. In order to perform a preliminary analysis on the behaviour of the blends, the materials were prepared in a batch mixer. The materials have been completely characterized from a rheological, morphological, mechanical point of view. The results indic…

Effectiveness of organoclays as compatibilizers for multiphase polymer blends - A sustainable route for the mechanical recycling of co-mingled plasti…

2014

We prepare and characterize multiphase systems in which small amounts of recycled polymer, namely polyethylene terephtalate (PET) ground from waste bottles, are dispersed in a co-continuous blend of high-density polyethylene (HDPE) and polypropylene (PP). Some of such ternary systems are also filled with plate-like clay nanoparticles with different polarities, in order to assess their influence on the morphology and mechanical behaviour of the blends. On the basis of preliminary wettability considerations and inspections by means of scanning electron microscopy (SEM), the PET is found to preferentially locate within the PP phase. Such a positioning is desirable in order to minimize the pres…

Tissue engineered vascular grafts based on poly-lactic acid blends

2013

A great deal of research has been pursued in the last decade with the goal of developing blood vessel substitutes. Tissue engineering has emerged as a promising approach to address the shortcomings of current options. One of the major tasks in this research field is the possibility to tune the biodegradability of the implantable devices (scaffolds). After implantation, the scaffold has to be replaced by extra cellular matrix; with this respect, it is crucial that this replacement takes place with appropriate dynamics and a well-defined timescale. In this work tissue-engineered vascular graft were produced, utilizing several PLLA/PLA blends (100/0, 90/10, 75/25 wt/wt) in order to tune their …

Reprocessing of polyethyleneterephthalate and characterisation of monopolymer blends of virgin and recycled polymers

1997

Recycling of polyethyleneterephthalate (PET from bottles is considered by changing both reprocessing machines and the effect of humidity. The rheological and mechanical properties of this recycled material remain very close to that of the virgin material provided that a careful drying is carried out before any melt operation. The reprocessing has been carried out mainly in view of the use of this secondary material in blends with virgin PET-monopolymer or homopolymer blends. Indeed, this use is a common industrial practice to reuse plastic scraps. Most monopolymer blends show properties between those of the two components but in some cases lower than those expected on the basis of an additi…

Nanofilled Thermoplastic-Thermoplastic Polymer Blends

2014

Comparison of the solidification of a commercial PBT-PET blend with the behaviour of the constituents

2009

Synergistic effects of Janus particles and triblock terpolymers on toughness of immiscible polymer blends

2017

Abstract By influencing both the interfacial adhesion and the morphology, compatibilizers determine the mechanical properties of polymer blends. Here, we study the mechanical properties, in particular the fatigue crack propagation (FCP) of immiscible blends of poly(2,6-dimethyl-1,4-phenylene ether)/poly(styrene- co -acrylonitrile) (PPE/SAN), compatibilized with Janus nanoparticles (JPs) and linear polystyrene- block -polybutadiene- block -poly(methyl methacrylate) (SBM) triblock terpolymers. Synergistic effects of a mixture of both compatibilizers improve the FCP behavior and reveal the important role of interface stiffness and flexibility on the mechanical properties of polymer blends. The…

Toward the Decarbonization of Plastic: Monopolymer Blend of Virgin and Recycled Bio-Based, Biodegradable Polymer.

2022

Decarbonization of plastics is based on two main pillars: bio-based polymers and recycling. Mechanical recycling of biodegradable polymers could improve the social, economic and environmental impact of the use of these materials. In this regard, the aim of this study was to investigate whether concentrations of the same recycled biopolymer could significantly affect the rheological and mechanical properties of biodegradable monopolymer blends. Monopolymer blends are blends made of the same polymers, virgin and recycled. A sample of commercially available biodegradable blend was reprocessed in a single-screw extruder until two extrusion cycles were completed. These samples were exposed to gr…

Effect of Polyhydroxyalkanoate (PHA) Concentration on Polymeric Scaffolds Based on Blends of Poly-L-Lactic Acid (PLLA) and PHA Prepared via Thermally…

2022

Hybrid porous scaffolds composed of both natural and synthetic biopolymers have demonstrated significant improvements in the tissue engineering field. This study investigates for the first time the fabrication route and characterization of poly-L-lactic acid scaffolds blended with polyhydroxyalkanoate up to 30 wt%. The hybrid scaffolds were prepared by a thermally induced phase separation method starting from ternary solutions. The microstructure of the hybrid porous structures was analyzed by scanning electron microscopy and related to the blend composition. The porosity and the wettability of the scaffolds were evaluated through gravimetric and water contact angle measurements, respective…