Search results for "Polyolefins"

Degradation and stabilization of the polyolefins and of the filled-polyolefins

2009

Copolymerization of ethylene with norbornene or 1-octene using supported ionic liquid systems

2016

Copolymerization of ethylene with norbornene (E/NB) and ethylene with 1-octene (E/Oct) is performed using supported ionic liquid (SIL) systems, in which metallocene (Cp2VCl2) or post-metallocene [VCl2(salenCl2)] vanadium catalysts are immobilized in pyridinium chloroaluminate ionic liquid supported on silica. The studied SIL catalysts show higher activities as well as stability than their non-supported analogues. In addition, higher activities and better comonomer incorporation are observed for norbornene (above 30 mol%). The comonomer incorporation has considerable influence on copolymer molecular weight (M w), melting temperature, crystallinity degree, and microstructure of the copolymers…

Jauni viedie materiāli no multifāzu polimēru kompozīcijām, to fizikāli-mehānisko, deformatīvo un struktūras īpašību izmaiņas jonizējošā starojuma un …

2014

Promocijas darbā pētītas poliolefīnu – multifāzu kompozīcijas ar elastomēriem un šķērssaistīšanās promotoriem. Izvērtēta radiācijķīmiskās modificēšanas un lielas indukcijas magnētiskā lauka (B = 1,0-1,7 T) ietekme uz pētīto kompozītsistēmu stiprības-deformācijas, struktūras īpašībām, kā arī novērtēta magnētiskā lauka un jonizējošā starojuma mijiedarbības ietekme uz poliolefīnu makromolekulu šķērssaistīšanās efektivitāti. Iegūtas jaunas teorētiskas un praktiskas atziņas par radiācijķīmiski modificētu poliolefīnu multifāzu kompozīciju ekspluatācijas īpašībām, kas ļāva radīt jaunus uz polipropilēna bāzētus termonosēdmateriālus.

Novel strategic approach for the thermo- and photo- oxidative stabilization of polyolefin/clay nanocomposites

2017

Polyolefin/clay nanocomposites were prepared by melt mixing and their oxidative stability was studied under long-term thermo- and photo-oxidative test conditions in the absence and presence of a modified organo montmorillonite clay (OM-MMt) containing a chemically-bound hindered phenol antioxidant function, (AO)OM-Mt. It was found that nanocomposites based on both polyethylene (PE) and polyethylene-grafted-maleic anhydride (PEgMA) containing the (AO)OM-Mt gave a higher oxidative stability, along with better clay dispersion, compared to analogous PE or PEgMA-based nanocomposites containing an added (free) conventional antioxidant with a similar hindered phenol function (using the commercial …

Synthesis and catalytic performance in ethylene and 1-octene polymerization of chlorotitanium(IV) silsesquioxane complexes. Effect of increasing liga…

2016

Abstract The series of titanasilsesquioxanes that differ in a way of binding to the transition metal ( via one, two or three oxygen atoms) and type of nonreactive substituents bonded to inorganic oxygen-silicon cage ( i -Bu, Ph, c -C 6 H 11 ) were prepared by reacting of TiCl 4 with 1 eqv. of the silsesquioxane ligand. Upon treatment with an appropriate cocatalyst, all titanium precatalysts are active in ethylene and 1-octene polymerization and produce from low to high molecular weight polyethylenes and moderately ([ mmmm ] = 44–74%) isotactic poly(1-octene)s. The influence of polymerization parameters, type of cocatalyst and the silsesquioxane structure on the catalytic behavior of the tit…

Advanced ultra-high molecular weight polyethylene/antioxidant-functionalized carbon nanotubes nanocomposites with improved thermo-oxidative resistance

2015

Multiwalled carbon nanotubes (CNTs) functionalized with hindered phenol moieties are dispersed in ultra-high molecular weight polyethylene (UHMWPE), and the stabilizing action of the antioxidant (AO) functionalized CNTs (AO-f-CNTs) is studied through a combination of rheological and spectroscopic (FT-IR) analyses. The effectiveness of two alternative compounding methods, namely hot compaction (HC) and melt mixing (MM), is compared. The combination of high temperature and mechanical stress experienced during MM brings about noticeable degradation phenomena of the matrix already in the course of the compounding step. Differently, the milder conditions of the HC process preserve the stability …

Protection of high-density polyethylene-silicon composites from ultraviolet-visible photodegradation

2017

[EN] The extent of the ultraviolet¿visible (UV¿vis) photoirradiation effect on high-density polyethylene (HDPE) and HDPE¿sili-con (Si) composites is reported in terms of the addition of Si microparticles at contents of 0.1, 1, and 5 wt %. A standard acceleratedUV-vis exposure was applied over 2750 h, corresponding to 22 months in Florida. Thermogravimetry, differential scanning calorimetry,and Fourier transform infrared spectroscopy were used as reliable techniques for monitoring the quality of the HDPE-Si composites. Theincreasing addition of Si microparticles delayed the photodegradation of the HDPE¿Si composites. Because of their strong light-scattering effects, Si microparticles blocked…

Synthesis and olefin homo- and copolymerization behavior of new vanadium complexes bearing [OSSO]-type ligands

2017

Novel vanadium complexes bearing [OSSO]-type ligands having two phenolato units linked through the –CH2S(CH2)4SCH2– (1V) or –CH2S(CH2)2SCH2– (2V) bridge are synthesized with good yields by reacting a deprotonated ligand with VCl4. They are then used in ethylene (co)polymerization after activation with EtAlCl2 and Et2AlCl. In the presence of EtAlCl2, both complexes promote ethylene polymerization with very high activities, over 4 × 107 g/(mol h), leading to PEs with high molecular weight and narrow molecular weight distribution. The prepared complexes exhibit lower activity for ethylene/1-octene copolymerization. It is also revealed that the catalyst based on the –CH2S(CH2)4SCH2– bridged com…

Oxazoline functionalization of polyethylenes and their blends with polyamides and polyesters

2001

The compatibilization of blends of polyamide-6 (PA6) with linear low density polyethylene (LLDPE) and of poly(ethylene terephthalate) (PET) with high density polyethylene (HDPE), by functionalization of the polyethylenes with oxazoline groups was investigated. Chemical modification of LLDPE and HDPE was carried out by melt free radical grafting with ricinoloxazoline maleinate. Blends preparation was made either with a two-steps procedure comprising functionalization and blending, and in a single step in which the chemical modification of polyethylene with the oxazoline monomer was realized in situ, during blending. The characterization of the products was carried out by FTIR spectroscopy an…

Oxazoline-containing compatibilizers for polyamide/SAN and polyamide/ABS blends

2002

Polyamide (PA) and acrylonitrile/butadiene/styrene copolymer (ABS) may appear as a mixture in the recycled plastic stream. The incompatibility of these blends results in a blend with poor mechanical properties. The aim of this work is to partially convert the nitrile groups of the acrylonitrile/styrene copolymer (SAN) into oxazoline groups by reaction with aminoethanol (AE). Such modified SAN (SAN-m) can react with the amine or carboxylic acid end groups of PA, and therefore used as compatibilizers for blends of PA with ABS. SAN-m was found to reduce the SAN-domain size in the PA/SAN-blends. The initial acrylonitrile content of SAN-m had a strong influence on the degree of conversion into o…