Search results for "Polystyrene"

Functionalization of TiO2Nanoparticles with Semiconducting Polymers Containing a Photocleavable Anchor Group and Separation via Irradiation Afterward

2014

The controlled radical polymerization (RAFT polymerization) of semiconducting polymers based on poly(4,4′-dimethyl-triphenylamine) is described. These polymers are afterward end-functionalized with a photocleavable group and an anchor unit (catechol) for oxidic nanoparticles (NPs). Serving as a reference, polystyrene oligomers with the same end groups are also synthesized. Using these polymers allows functionalization of the TiO2-NPs, leading to an improved solubility and miscibility in organic solvents or polymer matrices. Irradiation in the UV region is used to split the photocleavable group and remove the polymer chains from the NPs, which leads to their aggregation.

Vapor Pressures of Polymer Solutions and the Modeling of Their Composition Dependence

2009

Equilibrium vapor pressures, p, are reported for the systems tetrahydrofuran + poly(vinyl methyl ether) and tetrahydrofuran + polystyrene at 20, 40, and 60 °C. These data plus information from the literature serve to demonstrate that the composition dependence of p can be modeled quantitatively for polymer solutions in thermodynamically very different solvents by means of three, physically meaningful parameters.

1989

Coefficients de diffusion de traceurs dans les melanges de PS avec poly(o-methylstyrene), poly(p-methylstyrene et un copolymere statistique p-m-methylstyrene

Coil overlap in moderately concentrated polyelectrolyte solutions: effects of self-shielding as compared with salt-shielding as a function of chain l…

2016

The generalized intrinsic viscosity {η} (hydrodynamic volume of the solute at arbitrary polymer concentration c) – introduced by analogy to the intrinsic viscosity [η] – provides access to the degree of coil overlap Ω for polyelectrolyte solutions in pure water or in saline water. The experimental basis of this investigation consists in viscosity measurements as a function of c for a large number of sodium polystyrene sulfonate (Na-PSS) samples covering the molecular weight range from 0.91 to 1000 kg mol−1. The accurate modeling of these dependencies with a maximum of three parameters yields detailed information on Ω as a function of (c[η]) in the absence and in the presence of extra salt. …

Solution properties of polyelectrolytes

1991

Abstract Chromatographic data for sodium polystyrene sulphonate were obtained on both silica- and polymer-based size-exclusion supports using mobile phases of various pH and ionic strength. Deviations of the elution volume were observed towards both lower and higher values relative to the reference calibration graph obtained with uncharged standards. An empirical correlation is proposed in order to account for all the secondary effects observed. The general applicability of this correlation was further tested for chromatographic data obtained for a series of peptides and proteins on a silica-based support under very different eluent conditions. Deviations from ideal elution behaviour such a…

1988

An apparatus for turbidimetric measurements of demixing temperatures under shear flow is presented, and the results of experiments with trans-decahydronaphthalene/polystyrene (TD/PS) solutions, investigating molecular weights ranging from 100 kg/mol to 1770 kg/mol, are compared with viscometric data. It is found that the sign and magnitude of shear effects depend on molecular weight (Mw), polymer concentration (c2), and shear rate (). For the first time, it was possible to study a solution which exhibits shear dissolution at low shear rates but shear demixing at high shear rates.

Precipitation chromatography. III. Optimization of the experimental conditions and determination of the polydispersity of fractions

1974

The influence of the solvent–nonsolvent gradient and the temperature gradient on the efficiency of the precipitation chromatography is investigated with radically and anionically prepared polystyrene samples. Only a combination of both gradients gives optimal effectiveness of the column. The separating power of the column was determined by using mixtures of well defined samples. From the elution curves of the mixtures the nonuniformity Ufr of fractions can be estimated. For fractions of anionically prepared polystyrenes Ufr is on the average 0.001; this value is of the same order of magnitude as the statistical error. These results show that with this chromatographic method it is possible t…

Preparation of monodisperse polyethylene oxides by gel permeation chromatography of discontinuous polymer-homologous series

1970

Abstract Starting from triethylene glycol, monodisperse polyethylene oxides of a molecular weight (MW) up to 2000 (degree of polymerisation (DP) During the first step the ditosylate of triethylene glycol is reacted with the sodium alkoxide of the same diol at room temperature. The condesation product (polymer homologues of triethylene glycol) was separated by molecular distillation and yielded the pure oligomers nonaethylene glycol (DP = 9, MW 414) and pentadecaethylene glycol (DP = 15, MW = 678), as proved by gel chromatography. During the next step the polymer homologues of nonaethylene glycol were synthesised in a similar way. The pure oligomers hepteicosa (DP = 27, MW = 1207) and pentat…

Effect of polystyrene coating on pore, structural and chromatographic properties of silica packings

1990

Abstract A series of mesoporous and macroporous silicas with a mean pore diameter (PD), between 6 and 200 nm were reacted with a copolymer of styrene and vinyl-methyldiethoxysilane. The mass load of coated silicas corresponded to the monolayer capacity of the polymer calculated on the basis of the molecular cross-sectional area, except for the two mesoporous silcias of PD = 6 and 7.5 nm. Depending on the pore size, changes occurred in the specific surface area, as, between the native and the coated product. A comparison of the specific pore volume, νp, of silicas before and after polymer immobilization indicated a major loss of νp for the two mesoporous silicas whereas this effect was much …

1978

The phenomenon of co-nonsolvency, i.e. the formation of nonsolvents by mixing two solvents, was studied for the system N,N-dimethylformamide/cyclohexane/polystyrene (DMF/CH/PS) which is characterized by the fact that the components of the mixed solvent are only incompletely miscible below 48,6°C. A number of quasibinary sections (stepwise addition of the second solvent to given solutions of the polymer in the first solvent) for a sample (M = 110000) of high molecular uniformity yielded a cloud point surface which gives “island curves” (closed solubility gaps) for constant temperatures between the critical temperature of DMF/CH and the top of the cloud point surface (51,3°C). The attainment …