Search results for "Polystyrene"

Shear Effects on the Phase Diagrams of Solutions of Highly Incompatible Polymers in a Common Solvent. 2. Experiment and Theory

1997

Cloud point temperatures (Tcp) were measured at different constant shear rates for three representatives of the ternary system cyclohexanone/polystyrene/poly(n-butyl methacrylate) (CHO/PS/PBMA) by means of a newly constructed rheo-optical apparatus that can be operated in the temperature range from 0 to 100 °C up to maximum shear rates of 1440 s-1 and maximum stresses of 384 Pa. In all cases one observes an extension of the homogeneous region as the shear rate γ is raised. With the system CHO/PS 196w/PBMA 2050 (the figures denote the molar masses of the polymers in kilograms/mole) the effects become maximum for high concentrations of PBMA, where the demixing temperatures increase by more th…

Shear Effects on the Phase Diagrams of Solutions of Highly Incompatible Polymers in a Common Solvent. 1. Equilibrium Behavior and Rheological Propert…

1997

Phase diagrams (cloud points, tie lines, critical compositions) and viscosities of homogeneous solutions were determined at temperatures ranging from 20 to 100 °C for three representatives of the ternary system cyclohexanone/polystyrene/poly(n-butyl methacrylate) [CHO/PS/PBMA] in preparation of a study on shear influences. An only moderate increase of the two-phase region observed upon heating (LCST behavior) witnesses little heat effects upon mixing. Tie lines which are nearly parallel to the PS/PBMA edge of the Gibbs phase triangle indicate comparable solvent quality of CHO for both polymers. The quantitative mathematical description of the equilibrium behavior-required for a theoretical …

Vitrification of polymer solutions as a function of solvent quality, analyzed via vapor pressures.

2006

Vapor pressures (headspace sampling in combination with gas chromatography) and glass transition temperatures [differential scanning calorimetry (DSC)] have been measured for solutions of polystyrene (PS) in either toluene (TL) (10-70 degrees C) or cyclohexane (CH) (32-60 degrees C) from moderately concentrated solutions up to the pure polymer. As long as the mixtures are liquid, the vapor pressure of TL (good solvent) is considerably lower than that of CH (theta solvent) under other identical conditions. These differences vanish upon the vitrification of the solutions. For TL the isothermal liquid-solid transition induced by an increase of polymer concentration takes place within a finite …

1984

Sedimentation coefficients of S of polystyrene covering a broad range of molecular weights M, are measured in toluene and 2-butanone in the semidilute regime. The results are compared with literature data using a plot of S · NA · η/(1 − νρ) = M · η/f versus concentration c, allowing experiments in different solvents of different density ρ and viscosity η to be compared (ν: partial specific volume of polymer; f: friction coefficient; NA: Avogadro number). According to scaling theory for concentrations higher than a critical concentration c, linear plots are to be expected. This is true for the theta-solvent cyclohexane, but for the theta-solvent cyclopentane as well as for the thermodynamica…

Rheological Behavior Under Shear and Non-Isothermal Elongational Flow of Biodegradable Polymers for Foam Extrusion

2013

The production of many items, in particular for food packaging applications, is based on foam extrusion and thermoforming. These operations require the use of polymers which can grant some specific rheological properties, both under shear and elongational flow. In this work, the behavior of some biodegradable polymers [Mater-Bi® and poly(lactic acid)] under shear and non-isothermal elongational flow was investigated and compared with a traditional, non-biodegradable polymer, in order to assess their suitability for industrial-scale foam extrusion and thermoforming. The rheological characterization evidenced the differences between the different biodegradable polymers and the reference polys…

Titanium isodicyclopentadienide hemimetallocenes for ethylene/styrene copolymerization

2004

Abstract The syndiotactic polymerization of styrene with exo-[(η5-isodiCp)TiCl3] 1/methylalumoxane (MAO; isodiCp=isodicyclopentadienyl) was studied as well as the ethylene/styrene copolymerization with exo-[{η5:η1(N)-isodiCp(SiMe2Nt-Bu)}TiCl2] 2/MAO. These two catalytic systems are stable during polymerization. The half-sandwich titanocene 1 exhibits good syndiospecificity and average activity. The bridged half-sandwich amino complex 2 was found to incorporate styrene into polymer chains at 70 °C. Activity results decrease with increasing styrene concentrations.

Polymer-induced phase separation in Escherichia coli suspensions

2010

We studied aggregation and phase separation in suspensions of de-flagellated Escherichia coli (AB1157) in phosphate buffer induced by the anionic polyelectrolyte sodium polystyrene sulfonate. We also performed Monte Carlo simulations of this system based on the Asakura–Oosawa model of colloid–polymer mixtures. The results of these simulations, as well as comparison with previous work on synthetic colloid–polymer mixtures, demonstrate that the role of the polymer is to cause a depletion attraction between the E. coli cells. The implication of these results for understanding the role of (predominantly anionic) extracellular polymeric substances (EPS) secreted by bacteria in various natural ph…

Thermodynamically induced shear degradation

1988

The shear degradation of polymers in semiconcentrated solutions is viewed as a function of solvent quality. It is shown that the deterioration of the thermodynamic quality of the solvent leads to a marked flow resistance due to an increasing number of contacts between the chains. This may be probed by viscosimetric measurements as well as by degradation experiments (“thermodynamically induced shear degradation”). For a detailed discussion of this phenomenon the experimental setup for the mechanochemical experiment is outlined first, followed by a survey of the kinetics of chain scission. Finally, experiments mostly obtained on polystyrene in the theta-solvent trans-decalin are discussed. Th…

Temperature and pressure dependence of phase separation of trans-decahydronaphthalene/polystyrene solution

2004

Abstract The cloud-point temperatures (Tcl’s) of trans-decahydronaphthalene (TD)/polystyrene (PS, Mw=270 kg/mol) solutions were determined by light scattering measurements over a range of temperatures (1–16 °C), pressures (100–900 bar), and compositions (4.2–21.6 vol% polymer). The system phase separates upon cooling and the Tcl was found to increase with the rising pressure for the constant composition. In the absence of special effects this finding indicates positive excess volumes. The special attention was paid to the demixing temperatures as a function of the pressure for the different polymer solutions and the plots in the T-volume fraction plane and P-volume fraction plane. The cloud…

Direct potentiometric immunoelectrodes

1993

TK pencil fine mines type Faber Castell Super polymer from Staedtler are used as graphite based material for an atrazine-sensitive immunoelectrode. Eighteen procedures are tested to immobilize antibodies against atrazine but only one turned out to be useful for the preparation of a graphite based immunoelectrode. It incorporates binding of glutardialdehyde to active sites of the graphite surface and subsequent cross-linking of the antibodies with glutardialdehyde. The method has been carefully optimized with respect to selectivity and the cross-sensitivity is determined for such an electrode based on atrazine-rabbit and atrazine-sheep antibodies as well. Due to the structural difference of …