Search results for "Polystyrene"
showing 10 items of 349 documents
ESTIMATION OF INJECTION PRESSURE DURING MOLD FILLING.
1982
Dimensionless diagrams for estimating the bulk temperature of the flow front and injection pressure in the limit of small viscous generation are obtained. Also, a criterion for neglecting viscous generation is identified, The diagrams, based on the Lord and Williams model, refer to rectangular geometry and amorphous materials. A satisfactory comparison is obtained with literature data taken on polystyrene. A reasonable estimate of polyethylene injection pressure was obtained by roughly accounting for latent heat of crystallization through modified thermal diffusivity.
Mechanical and rheological properties of polystyrene-block-polybutadiene-block-polystyrene copolymer reinforced with carbon nanotubes: effect of proc…
2017
Abstract Styrene-b-butadiene-b-styrene (SBS)-based nanocomposites filled with unmodified and –COOH functionalized carbon nanotubes (CNTs) have been formulated at different processing conditions in order to provide an understanding of the influence of the processing temperature and mixing speed on the nanofillers dispersion and on the overall properties of the nanocomposites. The evaluation of the nanocomposites’ mechanical and rheological behavior reveals that the effect of the processing speed on the final properties is almost negligible. Differently, the processing temperature influences strongly the mechanical and rheological properties of SBS-based nanocomposites. Indeed, for the nanoco…
Hydrogel films engineered in a mesoscopically ordered structure and responsive to ethanol vapors
2014
Abstract Responsive hydrogels filling the interstitial spaces of photonic crystals can form mesoscopically structured materials, which exhibit reversible shifts in the Bragg diffracted light as a response of environmental changes. These materials can be used to generate chemical or biochemical sensors. The present work reports on the synthesis and characterization of ethanol responsive hydrogels that can be used in the design of novel breathalyzers. The dynamic mechanical behavior of the macroscopic hydrogels and their swelling features in the presence of different liquids or vapors have been investigated to orientate the choice of the best responsive material and curing process. The swelli…
Structure-properties relationships of polyhedral oligomeric silsesquioxane (POSS) filled PS nanocomposites
2012
The polyhedral oligomeric silsesquioxane (POSS) additivated polystyrene (PS) based nanocomposites were pre- pared by melt processing and the structure-properties relationships of the POSS-PS systems were compared to those of the neat PS. In order to investigate the effect of these structural parameters on the final properties of the polymer nanocompos- ites, five different kinds of POSS samples were used, in particular, POSS with different inorganic cage and with different organic pendent groups. The rheological investigation suggests clearly that the POSS acts as a plasticizer and that the processability of the PS was positively modified. The affinity between the POSS samples and the PS ma…
Long-term thermomechanical degradation of molten polystyrene
1985
Abstract Rheological data on polystyrene samples processed for long periods under various mechanical stresses are presented. The data indicate that thermomechanical degradation occurs and that the rate of thermal degradation is increased by the applied stress. Moreover degradation does not reach a limiting value even at high processing times.
Interpolymer complex between hydroxypropyl cellulose and maleic acid-styrene copolymer: phase behavior of semi-dilute solutions.
2005
Summary: The phase behavior of a water/hydroxypropyl cellulose/maleic acid–styrene copolymer (H2O/HPC/MAc-S) system was investigated in the semi-dilute range by turbidimetry, rheology, and optical microscopy. The two polymers under investigation form interpolymer complexes via hydrogen bonding. In the case of a total polymer concentration of cpol = 5 mg · mL−1 a second phase segregates upon heating the homogeneous ternary system. By applying a constant shear rate ( = 50 s−1) the phase separation temperature of the system is 10–15 °C lower than for an unsheared one. For cpol = 10 mg · mL−1 phase separation has already occurred at room temperature when the two binary polymer solutions are mix…
Compatibility of a statistical copolymer P(EMA-co-MMA) with PS and PMMA
1999
The compositions of coexisting phases and the interface widths in blends of a statistical copolymer of poly(ethylmethacrylate-co -methylmethacrylate) (P(EMA 1-x -co-MMA x )) and a deuterated polystyrene (PS(D)) as well as a deuterated poly(methylmethacrylate) (PMMA(D)) have been investigated by neutron reflectometry (NR). Interaction parameters are calculated from the compositions of coexisting phases and the interface width values. Utilizing a novel two dimensional scheme for graphical representation of the interaction parameters, the results are in very good agreement with studies on the interaction parameters for PS/PMMA, PS/PEMA and PEMA/PMMA blends. In particular, χ EMA/MMA deduced fro…
Modelling the Influence of Nanoparticles in the Phase Behaviour of an Epoxy/Polystyrene Mixture, 2
2007
The influences of nanoparticle size and concentration on the thermodynamic behaviour of epoxy/polystyrene blends are evaluated in the framework of Ginzburg's simple analytical theory. Two approaches have been employed: NPEPO (for particles coated with epoxy groups) and NPFEN (for particles coated with phenyl groups). Using NPEPO, the particles are found to prefer the phase richer in epoxy, whereas the opposite occurs for NPFEN. The particles size significantly influences blend compatibility. When the particle radius Rp is about the same size as the radius of gyration R g of PS, the compatibility of blends increases with particle concentration, whereas for R p > R g , higher particle concent…
Thermal behavior and spherulitic superstructures of SBC triblock copolymers based on polystyrene (S), polybutadiene (B) and a crystallizable poly(ɛ-c…
1996
The dynamic crystallization and the melting behavior of polystyrene-block-poly(e-caprolactone) (PS-b-PCL, short notation SC), polybutadiene-block-poly(e-caprolactone) (PB-b-PCL, BC) and polystyrene-block-polybutadiene-block-poly(e-caprolactone) (PS-b-PB-b-PCL, SBC) have been studied using differential scanning calorimetry. The copolymers with high molecular weight exhibit microphase separation into microphases consisting of polystyrene, polybutadiene and poly(e-caprolactone) and partial crystallization of the corresponding PCL block. The crystallization occurs at temperatures below the PS glass transition. Depending on the block copolymer composition, crystallization takes place through a c…
Amphipolar core-shell cylindrical brushes
1999
Methacryloyl-endfunctionalized block copolymers consisting of styrene and 2-vinylpyridine were polymerized to polyblockcomacromonomers with a much higher main chain than side chain degree of polymerization. Like homopolymacromonomers these molecules exhibit the structure of cylindrical brushes. Since the vinylpyridine block is coupled to the polymerizable group, the resulting cylindrical macromolecules exhibit a core of vinylpyridine and a shell of polystyrene, thus resembling an amphipolar unimolecular micelle of cylindrical shape. The micellar character of the structure is demonstrated by loading the cylindrical brushes with tetrachloroauric acid in toluene. Subsequent reduction leads to …