Search results for "Pre-treatment"

Chemometric Study on Alkaline Pre-treatments of Wood Chips Prior to Pulping

2016

Alkaline pre-treatments were performed for the production of organics-containing effluents from silver/white birch (Betula pendula/pubescens) and Scots pine (Pinus sylvestris) chips prior to chemical pulping. Pre-treatment conditions were varied with respect to time (from 30 min to 120 min), temperature (130 °C and 150 °C), and alkali charge (1, 2, 3, 4, 6, and 8% of NaOH on oven-dried wood). The analytical data (total content, weight average molar mass, and molar mass distribution) on dissolved lignin were subjected to principal component analysis to examine the relationship between molar mass and molar mass distributions in lignin removed from different wood species under varying alkaline…

BIOGLASS® integration in Poly-L-Lactic-Acid scaffolds produced via Thermally Induced Phase Separation (TIPS).

In this work, a method of integration of BG particles in polymeric scaffold was developed with a trial and error procedure. The main purpose was to obtain highly porous and mechanically stable bioactive devices.

Sulfur-free pulping of hot-water-extracted spruce sawdust

2016

Softwood (Picea abies) sawdust was hot-water-extracted with two multi-phase processes (160-180°C, 100-280 min, and liquor-to-wood ratio 5 l/kg) corresponding to P-factors of ~780 (yield 80.0%) and ~4580 (yield 72.4%). The pre-treated materials were then pulped with the soda-AQ cooking (170°C, NaOH charge 20%, AQ charge 0.1%, 30-150 min, and liquor-to-wood ratio 5 l/kg), resulting in a yield range of 36.1-61.4% (for reference cooks without pre-extraction 47.9-60.0%). It was observed that the pre-extraction under moderate conditions enhanced the dissolution especially of large-molar-mass lignin during cooking, and the total amount of the dissolved lignin was also higher than that removed from…

Contribution to the development of 100% bio-based composites : synthesis of bio-based polyepoxides, supercritical CO2 treatment of hemp fibers and im…

2018

This thesis contributes to the development of 100% bio-based hemp/epoxy composites. Current environmental issues favor the emergence of materials derived from renewable resources such as plant fibres and a wide range of bio-based building-blocks, source of epoxy prepolymers in particular. An intensive investigation of the two constituents (hemp fibres and polyepoxidic matrix) is carried out before the composites manufacturing. Supercritical CO2 treatment is applied to hemp fibres used as reinforcement in composite materials. This treatment, not optimized, leads to better individualization as well as a decrease in the hygroscopic power of the fibres. These aspects, which are essential in ord…

Effects of clinical and laboratory variables and of pretreatment with cardiovascular drugs in acute ischaemic stroke: A retrospective chart review fr…

2009

Background: Few studies have examined the role of cardiovascular drugs on acute ischaemic stroke prognosis. Aims: To evaluate the relationship between a favourable outcome in patients with acute ischaemic stroke and specific demographic, clinical and laboratory variables and cardiovascular drug pretreatment. Methods: The 1096 patients enrolled in the GIFA study (who had a main discharge diagnosis of ischaemic stroke) represent the final patient sample used in this analysis. Drugs considered in the analysis included angiotensin converting enzyme (ACE)-inhibitors, angiotensin II receptor blockers, statins, calcium channel blockers, anti-platelet drugs, vitamin K antagonists and heparins. The …

Evaluation of carotenoids and furosine content in air dried carrots and parsnips pre-treated with pulsed electric field (PEF)

2019

Carrot and parsnip slices were subjected to hot drying at 50, 60 and 70 °C with or without pulsed electric field (PEF) pre-treatment at 0.9 kV/cm and 1000 and 10,000 pulses. The effect of drying on processed samples was assessed by analysis of carotenoids, the furosine value, total phenols and the Whiteness Index (WI). PEF pre-treatment is effective in reducing drying times, but the degree of cellular breakdown makes the compounds more susceptible to chemical and enzymatic reactions. In our condition PEF pre-treatment increased the carotenoid degradation and promoted the Maillard reaction above all at the highest temperature of 70 °C. The assessment of carotenoid stability, together with th…

Characterization of pre-treatments on wood chips prior to delignification by near infrared spectroscopy

2017

A near infrared (NIR) spectroscopy-based method for predicting yields and lignin contents of differently pre-treated silver/white birch (Betula pendula/B. pubescens) and Scots pine (Pinus sylvestris) chips was developed. The approach was to create multivariate calibration models from the NIR data by the partial least squares (PLS) method. Both parameters are important factors when adjusting adequate conditions for pre-treatments either with hot-water (HW) as such and slightly acidified HW (collectively referred to as autohydrolysis) or dilute alkaline aqueous solutions prior to alkaline pulping. Pre-treatment conditions were varied with respect to temperature (130 °C and 150 °C) and treatme…

Characterization of refuse derived fuel production from municipal solid waste: the case studies in Latvia and Lithuania

2020

Abstract The authors determined the morphological composition of refuse derived fuel (RDF) produced in Latvia and Lithuania by manually sorting. The parameters of RDF (moisture, net calorific value, ash content, carbon, nitrogen, hydrogen, sulphur, chlorine, metals) was determined using the EN standards. Comparing obtained results with data from literature, authors have found that the content of plastic is higher but paper and cardboard is lower than typical values. Results also show that the mean parameters for RDF can be classified with the class codes: Net heating value (3); chlorine (3); mercury (1), and responds to limits stated for 3rd class of solid recovered fuel. It is recommended …

STUDY ON GAMETIC EMBRYOGENESIS VIA IN VITRO ANTHER AND ISOLATED MICROSPORE CULTURE IN FRUIT CROPS

2014

Fruit breeding is mainly based on both conventional (hybridization, mutation and selection) or biotechnological methods (somatic hybridization, genetic transformation and haploid production). The genetic improvement through the conventional methods is limited by many factors such as fruit trees long juvenile period, high heterozygosity, large size and sexual incompatibility. Haploids and doubled haploids, obtained through gametic embryogenesis have a potential use in fruit crops genetic improvement. The change of the microspores fate from the normal gametopytic pathway towards the sporophytic induction is affected by numerous factors. Genotype, medium composition and stress were considered …

Effect of a physical pre-treatment and drying on carotenoids of goji berries ( Lycium barbarum L.)

2018

In order to evaluate the influence of an abrasive pre-treatment and drying at 50 °C, 60 °C, 70 °C of goji fruits (Lycium barbarum L.), changes in colour and carotenoids were studied. An extraction method was modified and adapted to assay the main carotenoid esters and saponified carotenoids of goji berries, before and after treatments. Goji berries were confirmed as a high source of zeaxanthin, with zeaxanthin-dipalmitate at about 2 g/kg dry weight. The reliability of the analytical method was confirmed by the high quantitative recoveries, about 100%, a higher repeatability than reference methods and a good reproducibility (lower than 5%). After drying, significant but small carotenoid loss…