Search results for "Progettazione"
showing 10 items of 581 documents
Static strength and fatigue life of optimized hybrid single lap aluminum–CFRP structural joints
2017
Hybrid bolted/bonded joints are used to assemble structural components, commonly made by carbon fiber reinforced plastics (CFRP), with aluminum frames. Hence, they have become common solutions in a number of modern structural applications in the industrial fields, as well as civil constructions. Unfortunately, due to the lack of understanding of the relationships between the multiple parameters of influence that characterize their mechanical performance, only limited improvement have been achieved so far over classical bonding approaches, in terms of static and fatigue strength. As a result, further studies are needed in order to better exploit the potential of hybrid bolted/bonded joints a…
Infrared Thermography assisted evaluation of static and fatigue Mode II fracture toughness in FRP composites
2019
Abstract The work proposes the combined use of a Modified Transverse Crack Tension (MTCT) test coupon and Infrared Thermography, to evaluate the static and fatigue behaviour of Fibre Reinforced Polymer composites under Mode II delamination. Artificial delaminations starters are added to the TCT coupon, whose effects on the Strain Energy Release Rate are discussed. Infrared Thermography and Thermoelastic Stress Analysis are implemented to investigate stresses and delaminations growths on two FRP materials: a pre-preg IM7/8552 carbon fibre-epoxy and a glass-fibre reinforced epoxy laminates. The thermographic, thermoelastic and second harmonic signals have been obtained and used to monitor the…
Thermoelastic Stress Analysis of modified Transverse Cut Tensile composite specimens under pure Mode II fatigue delamination
2018
The present work investigates the behaviour of a Transvers Crack Tensile (TCT) specimen undergoing fatigue loading, by means of a Thermoelastic Stress Analysis (TSA) experimental setup. The TCT is a tensile composite specimen where a number of internal layers are cut through the beam width. The presence of such transverse notch favours the formation of interlaminar Mode II delaminations, starting from the notch tips and propagating between the cut and continuous plies. In this work, a modification is adopted to the classic TCT specimen, where insert films, mimicking artificial delaminations, are laid across the notch tips. This is done with the purpose to favour a pure Mode II and a symmetr…
Determination of Bubble Size Distribution Using Ultrasound Array Imaging
2020
In this article, ultrasonic phased arrays are deployed as an imaging tool for industrial process analysis. Such arrays are typically used for sonar, medical diagnosis, and nondestructive testing; however, they have not yet been applied to industrial process analysis. The precise positioning of array elements and high frequencies possible with this technology mean that highly focused images can be generated, which cannot currently be achieved using ultrasound tomography. This article aims to highlight the potential of this technology for the measurement of bubble size distribution (BSD) and to demonstrate its application to both intrusive and noninvasive process measurements. Ultrasound imag…
Laser ultrasonics for defect evaluation on coated railway axles
2020
Abstract This scientific paper focuses on the application of an advanced non-destructive technique for an effective inspection of railway axles. The method pertains to ultrasonic techniques, which are widely used in the railway field. The experimental investigation was carried out on simulated defects tooled near the cross section reduction of the axle, in order to simulate fatigue cracks which, due to notch effect, can trigger crack propagation and axle failure. The aim of this research activity is to evaluate how efficiently the proposed technique detects defects and to verify its applicability to axles with a black coating for protection. In view of the experimental setup, comprising a p…
Low-velocity impact behaviour of green epoxy biocomposite laminates reinforced by sisal fibers
2020
Abstract Due to its good mechanical characteristics, low cost and high availability in the current market, sisal fiber is one of the most used for the manufacturing of biocomposites in various industrial fields (automotive, marine, civil construction etc.). The particular sub-fibrillar structure of the sisal fiber (similar to aramid fibers) and the corresponding anisotropic behavior detected by recent research activities, suggest that such biocomposites should exhibit also high impact strength, in such a way to permit their advantageously use also for the manufacturing of crashworthy components (bumpers, helmets, protection systems etc.), that are at the same time also eco-friendly, lightwe…
Mechanical Properties of CNT/Polymer
2018
Abstract The high mechanical properties, the stiffness-to-weight and strength-to-weight make the carbon nanotubes a perfect reinforcing agents in advanced composites. This interesting potential has attracted the attention of both industry and academia that have committed to this research field an impressive amount of work. Several applications of carbon nanotubes enriched polymer composites have already been seen: aerospace structures, sporting goods, automotive components, medical devices, optical barriers, photovoltaic devices, conducting plastics, electromagnetic interference shielding, efficient electrostatic painting of plastics, composite mirrors, plastics with high thermal dissipatio…
Electrical conductance of carbon nanotubes with misaligned ends
2013
During a manufacturing process, when a straight carbon nanotube is placed on a substrate, e.g., production of transistors, its two ends are often misaligned. In this study, we investigate the effects of multiwall carbon nanotubes’ (MWCNTs) outer diameter and chirality on the change in conductance due to misalignment of the two ends. The length of the studied MWCNTs was 120 nm, while the diameters ranged between 4 and 7 nm. A mixed finite element-tight-binding approach was carefully designed to realize reduction in computational time by orders of magnitude in calculating the deformation-induced changes in the electrical transport properties of the nanotubes. Numerical results suggest that ar…
Frictional effect in mode II delamination: Experimental test and numerical simulation
2013
Abstract The present paper proposes an experimental and a numerical analysis of the frictional effect on the mode II delamination. Frictional stresses between the crack edges can absorb and dissipate significant energy contributions in the delamination zones, especially under cyclic loading conditions. The experimental tests are performed for a set of unidirectional End-Notched Flexure (ENF) composite specimens, which are subjected to fatigue loading law with increasing mean value. The numerical analyses are performed considering a cohesive–frictional constitutive model, which is able to reproduce the transition of the interface behavior from the sound elastic condition to the fully cracked…
Mechanical behavior of a sandwich with corrugated GRP core: numerical modeling and experimental validation
2014
In this work the mechanical behaviour of a core reinforced composite sandwich structure is studied. The sandwich employs a Glass Reinforced Polymer (GRP) orthotropic material for both the two external skins and the inner core web. In particular, the core is designed in order to cooperate with the GRP skins in membrane and flexural properties by means of the addition of a corrugated laminate into the foam core. An analytical model has been developed to replace a unit cell of this structure with an orthotropic equivalent thick plate that reproduces the in plane and out of plane behaviour of the original geometry. Different validation procedures have been implemented to verify the quality of t…