Search results for "Pyrolysis"
showing 10 items of 170 documents
Study of Burseraceae resins used in binding media and varnishes from artworks by gas chromatography–mass spectrometry and pyrolysis-gas chromatograph…
2005
In the present work, a study attempting to characterize the Manila elemi and Mexican copal resins from the Burseraceae family, which are used as components of varnishes and binding media of artworks, has been carried out. A new GC-MS method involving the use of methyl chloroformate as derivatisation reagent has been proposed. A second method which uses pyrolysis-GC-MS and hexamethyldisilazane as derivatization reagent has also been applied. Characterization of the main components of the mono-, sesqui- and triterpenoid fractions occurring in the raw materials has been achieved. Both alpha- and beta-amyrin have been established as the major triterpenoid compounds occurring in these resins tog…
Cr(VI)/Cr(III) and As(V)/As(III) Ratio Assessments in Jordanian Spent Oil Shale Produced by Aerobic Combustion and Anaerobic Pyrolysis
2011
With the increase in the awareness of the public in the environmental impact of oil shale utilization, it is of interest to reveal the mobility of potentially toxic trace elements in spent oil shale. Therefore, the Cr and As oxidation state in a representative Jordanian oil shale sample from the El-Lajjoun area were investigated upon different lab-scale furnace treatments. The anaerobic pyrolysis was performed in a retort flushed by nitrogen gas at temperatures in between 600 and 800 °C (pyrolytic oil shale, POS). The aerobic combustion was simply performed in porcelain cups heated in a muffle furnace for 4 h at temperatures in between 700 and 1000 °C (burned oil shale, BOS). The high loss-…
Study on the effects of chemical cleaning on pinaceae resin-based varnishes from panel and canvas paintings using pyrolysis-gas chromatography/mass s…
2006
Abstract Cleaning of varnish coatings is one of the most critical steps in the restoration treatment of paintings and characterization of physical and chemical processes involved in this practical procedure has attracted interest of scientists in the field of conservation. Evaluation of chemical cleaning methods based on the application of organic solvents and detergents on Pinaceae resin-based varnishes from panel and canvas paintings has been successfully carried out using pyrolysis-gas chromatograpy/mass spectrometry (Py-GC/MS). The proposed method includes the on-line derivatization of the diterpenoid resin using hexamethyldisilazane (HMDS). Analyses performed on a series of model varni…
Simultaneous determination of As, Cd, Cr and Pb in aqua regia digests of soils and sediments using electrothermal atomic absorption spectrometry and …
2002
A method was developed for the simultaneous multi-element determination of As, Cd, Cr and Pb in aqua regia digests of soils and sediments using an electrothermal atomic absorption spectrometer with a transversely heated graphite atomizer and longitudinal Zeeman-effect background correction. A fast furnace program with no pyrolysis stage or chemical modifier was used, and the total duration of the time-temperature program of the graphite furnace was 45 s. The method detection limits calculated from blank samples were 9.5 μg l−1, 0.18 μg l−1, 6.2 μg l−1 and 2.5 μg l−1 for As, Cd, Cr and Pb, respectively. Sample preparation procedures are briefly described. The accuracy of the method was confi…
Determination of NH(3) in pyrolysis gases by ammonia selective electrode.
1993
The suitability of ion-selective electrode for the determination of ammonia in pyrolysis gases of fossil fuels was studied. The ammonia was absorbed into acidic solution and two kinds of determination methods were carried out. The ammonia was either measured directly from the acid solution, or ammonia was first released into the gas phase and then determined (air gap method) by the ammonia selective electrode. The electrode functioned well in both cases, but the linear calibration range was rather narrow, slightly more than one tenfold. The quantitative detection limit in the water phase was 5 × 10−6M (0.085 ppm) NH3 and in gas phase operation solutions above 5 × 10−4M (8.5 ppm) NH3 it was …
Development of a new peat-based oil sorbent using peat pyrolysis
2013
The growing use and transport of crude oil and oil products has led to increasing numbers of oil spillages of various scales. Oil sorbents have been extensively used for remediation of the consequences of such accidents. The aim of this study is to investigate the possible use of peat and its thermal treatment products for oil sorption. Peat as an oil sorbent has poor buoyancy characteristics, relatively low oil sorption capacity and low hydrophobicity. However, thermal treatment (low-temperature pyrolysis and synthesis of peat-based activated coal) helps to significantly improve its sorptive characteristics. Peat is a potential material for oil sorption because it has such advantages as lo…
Benzoxetes and Benzothietes ¾ Heterocyclic Analogues of Benzocyclobutene
2012
Benzo-condensed four-ring heterocycles, such as benzoxetes 1 and benzothietes 3 represent multi-purpose starting compounds for the preparation of various higher heterocyclic ring systems. The thermal or photochemical valence isomerizations between the benzenoid forms 1,3 and the higher reactive o-quinoid structures 2,4 provide the basis for the synthetic applications. On the other hand, this valence isomerization impedes in particular the generation and storage of 1 because the thermal equilibrium 1 ⇆ 2 is completely on the side of 2. Thus, the number of erroneous or questionable benzoxete structures published to date is surprisingly high. On the contrary, the thermal equilibrium 3 ⇆ 4 is o…
Method development of levoglucosenone analysis by UHPLC-UV-MS in fast pyrolysis samples and aspects of its degradation in aqueous samples
2020
Levoglucosenone ((1S,5R)-6,8-dioxabicyclo[3.2.1]oct-2-en-4-one or LGO; CAS number: 37112-31-5) is an extensively studied biomass based chemical and its potential applications in organic synthesis, as well as in the extraction of various natural substances, have been established; therefore developing dependable, yet fast and simple analytical methods for determining LGO in the products of thermochemical biomass processing is of great importance. In this work different UHPLC methods have been developed and compared for the determination of LGO in wood pyrolysis products. In addition to UV detection, LGO determination conditions by single quadrupole mass spectrometry have been adjusted with an…
A methodology to assess the energetic valorization of bio-based polymers from the packaging industry: pyrolysis of reprocessed polylactide
2012
The energetic valorization process of bio-based polymers is addressed in this study, taking polylactide (PLA) as model. The pyrolysis of virgin and multiple-injected PLA was simulated by means of multi-rate linear-non-isothermal thermogravimetric experiments. A complete methodology, involving control of gases, thermal stability and thermal decomposition kinetics was proposed. The release of gases was monitored by Evolved Gas Analysis of the fumes of pyrolysis, by in-line FT-IR, with the aid of 2D-correlation IR characterization. A novel model to establish the thermal stability of PLAs under any linear heating profile was proposed. A kinetic strategy was methodically applied to assess the th…
Preparation of photocatalysts by chemical methodologies
2021
Abstract The synthesis of photocatalytic materials is an important task for obtaining better results in terms of activity and/or selectivity in photocatalysis. This chapter reports an overview of the main methodologies using physical techniques to obtain bulky, supported powders or films and coatings to be used as heterogeneous photocatalysts. The classical chemical methodologies for the preparation of photocatalytic materials are presented in the previous chapter, so the information presented here complements the aforementioned one. Materials scientists and engineers have made significant progresses in the improvement of methods of synthesis of nanomaterial solids by developing different a…