Search results for "QUARTZ"
showing 10 items of 239 documents
Quantification of minerals from ATR-FTIR spectra with spectral interferences using the MRC method.
2017
A method for quantifying the individual components of mineral samples based on attenuated total reflectance - Fourier transform infrared spectroscopy (ATR-FTIR) is described, extending the constant ratio (CR) method to analytes absorbing in a common range of wavenumbers. Absorbance values in the spectral region where the analytes absorb relative to the absorbance of an internal standard absorbing at a wavenumber where the analytes do not absorb, permits the quantification of N analytes using measurements at N fixed wavenumbers. The method was tested for mixtures of albite, orthoclase, kaolin and quartz.
Surface Pretreatment Boosts the Performance of Supramolecular Affinity Materials on Quartz Crystal Microbalances for Sensor Applications
2013
A Teflon-like coating is the key for the boost in sensitivity of quartz microbalances for the tracing of airborne analytes. Since the undesired signals for the interfering compounds are suppressed and the ones for the targeted compounds (e.g., peroxide explosives) are enhanced, the PCA output is improved.
TASCAを用いたCn, Nh, Fl化学実験のためのHg, Tl, PbのSiO2及びAu表面に対するオンライン化学吸着研究
2018
Online gas-solid adsorption studies with single atom quantities of Hg, Tl, and Pb on SiO$_{2}$ and Au surfaces were carried out using short-lived radioisotopes with half-lives in the range of 4-49 s. This is a model study to measure adsorption enthalpies of superheavy elements Cn, Nh, and Fl. The short-lived isotopes were produced and separated by the gas-filled recoil separator TASCA at GSI. The products were stopped in He gas, and flushed into gas chromatography columns made of Si detectors whose surfaces were covered by SiO$_{2}$ or Au. The short-lived Tl and Pb were successfully measured by the Si detectors with the SiO$_{2}$ surface at room temperature. On the other hand, the Hg did no…
Gas-liquid chromatographic analyses
1983
Abstract The gas chromatography of mixtures of n -alkyl acetates (CH 3 COOR, R = C 1 —C 8 ) and methyl esters of aliphatic n -carboxylic acids (R′COOCH 3 , R′ = C 1 —C 8 ) and certain of their monochlorinated derivatives has been studied on Carbowax 20M and SE-30 glass capillary columns under the same operating conditions. The separation of the isomeric monochlorinated esters was complete on Carbowax 20M, whereas on SE-30 the peaks of 6- and 7-chlorooctyl acetates and methyl (ω − 1)- and (ω − 2)-chlorooctanoates and -nonanoates partly overlapped. The complete separation of the mixtures could not be achieved, however, on Carbowax 20M, in spite of the use of various operating conditions. The …
Low-temperature Zr mobility: An in-situ synchrotron-radiation XRF study of the effect of radiation damage in zircon on the element release in $H_{2}O…
2006
The release of Zr, U, and Pb from nearly metamict zircon and its recrystallized analog and of Zr from fully crystalline and slightly radiation-damaged zircon in H 2 O + HCl ± SiO 2 fluids was investigated in situ at temperatures between 200 and 500 °C using a hydrothermal diamond-anvil cell and time-resolved synchrotron-radiation XRF analyses. Dissolution of nearly metamict zircon proceeded much faster than that of zircon with little or no radiation damage and resulted in a 1.5 to 2 log units higher Zr molality in 6 to 7 m HCl fluids. Extensive recrystallization of the almost fully amorphous material started at 260 to 300 °C in H 2 O + HCl, and at about 360 °C if quartz was added, and was c…
Calculation of the surface concentration of Zn(I) from the anodic voltammetric peak of zinc combined with the QCM results
2004
Deconvolution of voltammograms of anodic dissolution of zinc has proved to be possible through the electrochemical quartz crystal microbalance data and the F(dm/dQ) function. This deconvolution allows to calculate the surface concentration of Zn(I) and to obtain an estimation for the kinetic constant of the second single-electron transfer. Keywords: Zinc anodic dissolution, EQCM, Surface concentration, Deconvolution and kinetic constant
Quantitative XPS analysis of leached layers on optical glasses
1993
The corrosion of optical glasses often reduces the utility of uncoated glasses as well as the adhesion of resistive coatings deposited onto corroded glasses. Photoelectron spectroscopy (XPS) was applied to study glass surfaces with respect to their surface corrosion. In particular, leaching by the influence of polish slurries, pure water, air and even residual gases inside a vacuum device was studied in detail. Pure quartz glass and different sodium and barium silicate glasses were broken in ultrahigh vacuum (4 × 10−10 mbar) for the determination of sensitivity factors of the different XPS signals. It was found that a quantitative determination of the surface composition of corroded and lea…
Solid-State Electrochemical Method for Determining Core and Shell Size in Pd@PdO Nanoparticles
2010
Electrochemical characterization of palladium nanoparticles surrounded by a palladium oxide shell (Pd@PdO) is described from a combination of voltammetry plus electrochemical quartz crystal microbalance experiments at nanoparticle deposits on graphite electrodes in contact with aqueous H2SO4 and NaOH solutions. A method for determining the metal core size and oxide shell thickness of the Pd@PdO nanoparticles, based on a combination of conventional voltammetry of nanoparticles in DMSO solution and voltammetry of nanoparticle deposits in contact with 0.10 M aqueous NaOH solution, is described.
Study of the Chemical Conversion of Aluminum Alloys by Coupling CFDE and EQCM
2004
The ability of the channel flow double electrode (CFDE) technique and electrochemical quartz crystal microbalance (EQCM) for studying in situ chromate phosphate conversion coating on 5182 aluminum alloys was explored. It was first demonstrated that aqueous Cr(VI) can be analyzed quantitatively with the CFDE technique by reduction into Cr(III) on a graphite electrode. Samples used for EQCM were quartz plated by physical vapor deposition using a 5182 alloy target, allowing thin layers of aluminum alloys with a similar chemical composition to be obtained. EQCM was adapted in order to account for the hydrodynamic conditions in an industrial process, by placing the quartz in a flow cell. In orde…
In-situ characterisation of organosilane films formation on aluminium alloys by electrochemical quartz crystal microbalance and in-situ ellipsometry
2005
Abstract Organosilane pre-treatments have been studied intensively during the last years in order to replace hexavalent chromium conversion treatments. The aim of this study is to follow in-situ the formation of this organosilane layer in solution. Two in-situ techniques, spectroscopic ellipsometry and electrochemical quartz crystal microbalance, were used to investigate the mechanism and the kinetics of this protective film formation. In-situ measurements highlight that the organosilane film observed after the drying process is not formed into the solution, but during the emersion and drying step. Hence, it has been possible to characterise the presence of a very thin organosilane layer in…