Search results for "RAM"
showing 10 items of 35643 documents
Ultrasonic Welding of PBT-GF30 (70% Polybutylene Terephthalate + 30% Fiber Glass) and Expanded Polytetrafluoroethylene (e-PTFE)
2021
The ultrasonic welding of polymeric materials is one of the methods often used in practice. However, each couple of material subjected to ultrasonic welding is characterized by different values of technological parameters. Therefore, the main objective of the research presented in this paper is to optimize the parameters for the ultrasonic welding of two materials, namely PBT-GF30 (70% polybutylene terephthalate + 30% fiber glass) and expanded polytetrafluoroethylene (e-PTFE). In this sense, the research was carried out considering a plate-type part made of PBT-GF30, which had a thickness of 2.1 mm, and a membrane-type part made of e-PTFE, with a thickness of 0.3 mm. The condition imposed o…
Effect of position and force tool control in friction stir welding of dissimilar aluminum-steel lap joints for automotive applications
2020
Widespread use of aluminum alloys for the fabrication of car body parts is conditional to the use of appropriate welding methods, especially if dissimilar welding must be performed with automotive steel grades. Friction stir welding (FSW) is considered to be a reasonable solution to obtain sound aluminum-steel joints. In this context, this work studies the effects of tool position and force control in dissimilar friction stir welding of AA6061 aluminum alloy on DC05 low carbon steel in lap joint configuration, also assessing proper welding parameter settings. Naked eye and scanning electron microscopy (SEM) have been used to detect macroscopic and microscopic defects in joints, as well as t…
Decorous combinatorial lower bounds for row layout problems
2020
Abstract In this paper we consider the Double-Row Facility Layout Problem (DRFLP). Given a set of departments and pairwise transport weights between them the DRFLP asks for a non-overlapping arrangement of the departments along both sides of a common path such that the weighted sum of the center-to-center distances between the departments is minimized. Despite its broad applicability in factory planning, only small instances can be solved to optimality in reasonable time. Apart from this even deriving good lower bounds using existing integer programming formulations and branch-and-cut methods is a challenging problem. We focus here on deriving combinatorial lower bounds which can be compute…
Sampled Fictitious Play on Networks
2019
We formulate and solve the problem of optimizing the structure of an information propagation network between multiple agents. In a given space of interests (e.g., information on certain targets), each agent is defined by a vector of their desirable information, called filter, and a vector of available information, called source. The agents seek to build a directed network that maximizes the value of the desirable source-information that reaches each agent having been filtered en route, less the expense that each agent incurs in filtering any information of no interest to them. We frame this optimization problem as a game of common interest, where the Nash equilibria can be attained as limit…
Metaheuristic procedures for the lexicographic bottleneck assembly line balancing problem
2015
The goal of this work is to develop an improved procedure for the solution of the lexicographic bottleneck variant of the assembly line balancing problem (LB-ALBP). The objective of the LB-ALBP is to minimize the workload of the most heavily loaded workstation, followed by the workload of the second most heavily loaded workstation and so on. This problem-recently introduced to the literature (Pastor, 2011)-has practical relevance to manufacturing facilities. We design, implement and fine-tune GRASP, tabu search (TS) and scatter search (SS) heuristics for the LB-ALBP and show that our procedures are able to obtain solutions of a quality that outperforms previous approaches. We rely on both s…
Decomposition and Mean-Field Approach to Mixed Integer Optimal Compensation Problems
2016
Mixed integer optimal compensation deals with optimization problems with integer- and real-valued control variables to compensate disturbances in dynamic systems. The mixed integer nature of controls could lead to intractability in problems of large dimensions. To address this challenge, we introduce a decomposition method which turns the original n-dimensional optimization problem into n independent scalar problems of lot sizing form. Each of these problems can be viewed as a two-player zero-sum game, which introduces some element of conservatism. Each scalar problem is then reformulated as a shortest path one and solved through linear programming over a receding horizon, a step that mirro…
Aluminum to titanium laser welding-brazing in V-shaped grooveI
2017
International audience; Laser assisted joining of AA5754 aluminum alloy to T40 titanium with use of Al-Si filler wires was carried out. Continuous Yb:YAG laser beam was shaped into double spot tandem and defocalized to cover larger interaction zone in V shaped groove. Experimental design method was applied to study the influence of operational parameters on the tensile properties of the joints. Microstructure examination and fractography study were carried out to understand the relation between local phase content and fracture mode.Within defined window of operational parameters, statistically important factors that influenced the strength of T40 to AA5754 joints in V groove configuration w…
Pipeline Monitoring Architecture Based on Observability and Controllability Analysis
2019
Recently many techniques with different applicability have been developed for damage detection in the pipeline. The pipeline system is designed as a distributed parameter system, where the state space of the distributed parameter system has infinite dimension. This paper is dedicated to the problem of observability as well as controllability analysis in the pipeline systems. Some theorems are presented in order to test the observability and controllability of the system. Computing the rank of the controllability and observability matrix is carried out using Matlab.
Design of a robust controller for DC/DC converter–electrolyzer systems supplied by μWECSs subject to highly fluctuating wind speed
2020
Abstract A buck-based, isolated, high-voltage-ratio DC/DC converter that allows supplying a proton exchange membrane (PEM) electrolyzer from a micro-wind energy conversion system ( μ WECS) has been recently presented. It exhibits low ripple at the switching frequency on the output voltage and current and represents an attractive solution for low-cost hydrogen production. In this paper, a more accurate mathematical model of such a converter is derived and discussed. Then, a model-based robust controller is designed in the frequency domain using the Internal Model Control structure and in the context of H 2 ∕ H ∞ optimal control. The controller satisfies the condition of robust stability and …
Assessing the accuracy of industrial robots through metrology for the enhancement of automated non-destructive testing
2016
This work presents the study of the accuracy of an industrial robot KR5 arc HW, used to perform quality inspections of components with complex shapes. Metrology techniques such as laser tracking and large volume photogrammetry were deployed to quantify both pose and dynamic path accuracies of the robot in accordance with ISO 9283:1998. The overall positioning pose inaccuracy of the robot is found to be almost 1 mm and path inaccuracy at 100% of the robot rated velocity is 4.5 mm. The maximum pose orientation inaccuracy is found to be 14 degrees and the maximum path orientation inaccuracy is 5 degrees. Despite of the significant maximum inaccuracies, uncertainty of a robotic scanning applica…