Search results for "RECONSTRUCTION"
showing 10 items of 784 documents
The EUSO Data Simulation and Analysis Tree
2004
The "Extreme Universe Space Observatory - EUSO" is the first Space mission devoted to the exploration of the outermost bounds of the Universe through the investigation of the Extremely-High Energy Cosmic Rays, EECR, using the Earth atmosphere as a giant detector. The objective is to obtain a detailed description of the Cosmic Ray spectrum beyond 5×1019 eV together with a map of the arrival directions. EUSO will detect EECR looking at the streak of fluorescence light produced when such a particle interacts with the atmosphere. The signal will be detected after its propagation upward from the dark Earth atmosphere to the EUSO telescope accommodated, as external payload, on the International S…
The Ultra Fast Flash Observatory pathfinder – UFFO-p GRB imaging and location with its coded mask X-ray imager UBAT
2013
The UFFO pathfinder mission will attempt to locate the optical afterglow of a GRB within seconds of its detection and location by a wide field X-ray imager. It will be mounted on the Lomonosov spacecraft for launch in 2013 and consists of a coded mask X-ray imager UBAT to detect a GRB and estimate a direction vector which will be passed to the SMT optical system which will rotate a moveable mirror to lock onto the GRB and direct the optical afterglow to a camera with a ~17′ wide aperture. We present the design geometry of the UBAT instrument only, with results of simulations for a range of GRB types to show probable photon integration times to be expected to extract a significant FOV image…
A Pixelated Silicon Positron Sensitive Imaging Probe
2006
A pixelated silicon positron sensitive imaging probe is under development to precisely localize superficially located tumors accumulating 18F-FDG. 18F-FDG has been a radioisotope of interest mainly because of the high uptake in tumors and the relatively short positron range. Silicon detectors have generally low detection efficiency for high energy photons and can be used for positron detection. We present a pixelated silicon positron sensitive imaging probe that has the 1.4-by-1.4-by-1.0 mm pixel size with equivalent electronic noise of ~1.2 keV FWHM. The small pixel size leads to the high spatial resolution. Probe movement in conjunction with appropriate reconstruction will allow sub-pixel…
The AX-PET Concept: New Developments And Tomographic Imaging
2011
The Axial PET (AX-PET) concept proposes a novel detection geometry for PET, based on layers of long scintillating crystals axially aligned with the bore axis. Arrays of wavelength shifting (WLS) strips are placed orthogonally and underneath the crystal layers; both crystals and strips are individually readout by G-APDs. The axial coordinate is obtained from the WLS signals by means of a Center-of-Gravity method combined with a cluster algorithm. This design allows spatial resolution and sensitivity to be decoupled and thus simultaneously optimized. In this work we present the latest results obtained with the 2-module AX-PET scanner prototype, which consists of 6 radial layers of 8 LYSO crys…
Validation of the Monte Carlo Simulation of a Siemens Biograph mCT PET
2016
Geant4 Application for Tomography Emission (GATE) is a simulation platform based on GEANT4. It is designed to perform numerical simulations in medical imaging and radiotherapy. It is also used to simulate Emission Tomography (Positron Emission Tomography, PET and Single Photon Emission Computed Tomography, SPECT), Computed Tomography (CT) and Radiotherapy experiments. The purpose of this study is to validate a GATE model of the commercial PET/CT Siemens Biograph, the latest acquisition of the Clinical Hospital of Salamanca. The geometry of the system has been implemented in GATE, including the detector ring, the crystal blocks, the PMTs etc. Radionuclides for all measurements shall be \(^{1…
Dielectric versus topographic contrast in near-field microscopy
1996
Using a fully vectorial three-dimensional numerical approach (generalized field propagator, based on Green's tensor technique), we investigate the near-field images produced by subwavelength objects buried in a dielectric surface. We study the influence of the object index, size, and depth on the near field. We emphasize the similarity between the near field spawned by an object buried in the surface (dielectric contrast) and that spawned by a protrusion on the surface (topographic contrast). We show that a buried object with a negative dielectric contrast (i.e., with a smaller index than its surrounding medium) produces a near-field image that is reversed from that of an object with a posi…
Kinetic model for surface reconstruction
2002
Institut fu ¨r Physikalische und Theoretische Chemie, Technische Universitat Braunschweig, Hans-Sommer-Strase 10,38106 Braunschweig, Germany~Received 7 December 2001; published 25 July 2002!A microscopic kinetic model for the ab @e.g., hex131 for Pt~100! and 132131 for Pt~110!#surface reconstruction is investigated by means of the mean field approximation and Monte Carlo simulations.It considers homogeneous phase nucleation that induces small surface phase defects. These defects can grow ordecline via phase border propagation in dependence on the chemical coverage by an adsorbate A ~CO!.Anasymmetry in the adsorbate surface diffusion from one surface phase to the other gives rise to two criti…
Opto-digital tomographic reconstruction of the Wigner distribution function of complex fields.
2008
An optical-digital method has been developed to obtain the Wigner distribution function of one-dimensional complex fields. In this technique an optical setup is employed to experimentally achieve the Radon-Wigner spectrum of the original signal through intensity measurements. Digital tomographic reconstruction is applied to the experimental spectrum to reconstruct the two-dimensional Wigner distribution function of the input. The validity of our proposal is demonstrated with experimental data, and the results are compared with computer simulations.
Synthesis of filters for specified axial irradiance by use of phase–space tomography
2001
A procedure for designing pupil filters for applications where specified axial responses are required is developed. The method is based on the mathematical relationship between the axial impulse response of a system and the Wigner distribution function (WDF) associated to its pupil function. The desired axial irradiance, which can also have a predefined behavior depending on spherical aberration, is used to obtain this WDF by tomographic reconstruction. The synthetic pupil is retrieved from this distribution.
3D reconstruction of external and internal surfaces of transparent objects from polarization state of highlights
2014
A vision-based method is proposed to measure the 3D shape of external and internal surfaces (not accessible) of smooth transparent objects. Looking at the reflections of point sources on a specular surface with a polarimetric camera, we combine the measurements of two techniques: shape from distortion and shape from polarization. It permits us to recover the position and orientation of the specular surface for each detected point. The internal surface of transparent objects exhibiting as well a specular component, the same technique is used on the highlights coming from the back surface, taking into account the refraction by using polarimetric ray tracing.