Search results for "RME"
showing 10 items of 6748 documents
Edible Arabinoxylan-Based Films. 1. Effects of Lipid Type on Water Vapor Permeability, Film Structure, and Other Physical Characteristics
2002
Arabinoxylans (AX) are natural fibers extracted from maize bran, an industrial byproduct. To promote this polymer as a food ingredient, development of edible coatings and films had been proposed. Indeed, composite arabinoxylan-based films were prepared by emulsifying a fat: palmitic acid, oleic acid, triolein, or a hydrogenated palm oil (OK35). Lipid effects on water vapor permeability (WVP), surface hydrophobicity (contact angles), lipid particle size, and mechanical properties were investigated. Results showed that OK35-AX emulsion films had the lowest WVP. Emulsified films presented a bimodal particle size distribution; however, the smallest particle mean diameter (0.54 microm) was obser…
Preferential solvation of poly(methyl methacrylate) and a bisphenol A diglycidyl ether by size-exclusion chromatography
2004
The preferential adsorption coefficient, lambda, of poly(methyl methacrylate), PMMA, in solutions formed by an epoxy resin in tetrahydrofuran (THF), was studied by size-exclusion chromatography (SEC). Only PMMA of lowest molar mass was preferentially solvated by epoxy but at low concentrations of epoxy in the mixture. At higher epoxy content PMMA was preferentially solvated by THF. A simultaneous and competitive solvation between the specific interactions PMMA-epoxy and the self association of epoxy at high concentrations would be the responsible of this inversion point. The more compacted coil of PMMA of higher molecular weights in solution could explain the lack of interaction of these po…
Nortriptyline hydrochloride skin absorption: development of a transdermal patch.
2007
The influence of propylen glycol (PG), ethanol, and oleic acid (OA) on nortriptyline hydrochloride (NTH) penetration through human epidermis was studied in vitro at two different pH values (5.5 and 7.4). The influence of lactic acid and polysorbate 80 was studied for a pH of 5.5. Permeation studies through Heat Separated Epidermis, as well as the enhancing effect of the different vehicles, showed a pH dependency. A pH value of 5.5 in the donor solution decreases significantly the permeability coefficient (Kp) with respect to a pH value of 7.4 (0.011+/-0.004 x 10(-6) versus 0.36+/-0.04 x 10(-6)cm/s). The vehicles showed an increasing enhancement effect in the order: polysorbate 80>ethanol/PG…
Penetration enhancer containing vesicles as carriers for dermal delivery of tretinoin.
2011
The ability of a recently developed novel class of liposomes to promote dermal delivery of tretinoin (TRA) was evaluated. New penetration enhancer-containing vesicles (PEVs) were prepared adding to conventional phosphatidylcholine vesicles (control liposomes) different hydrophilic penetration enhancers: Oramix® NS10 (OrNS10), Labrasol® (Lab), Transcutol® P (Trc), and propylene glycol (PG). Vesicles were characterized by morphology, size distribution, zeta potential, incorporation efficiency, stability, rheological behaviour, and deformability. Small, negatively charged, non-deformable, multilamellar vesicles were obtained. Rheological studies showed that PEVs had fluidity higher than conven…
Effect of the natural winemaking process applied at industrial level on the microbiological and chemical characteristics of wine.
2013
The composition of yeast and lactic acid bacteria (LAB) communities and the chemical evolution of the large-scale commercial vinification of Catarratto IGT Sicilia, carried out under the biological regime, was followed from grape harvest until bottling. Simultaneously to the maximum growth of yeasts, LAB counts reached high level of concentration (6-7 log CFU mL(-1)) during the first steps of the alcoholic fermentation. Yeast identification was determined applying different molecular methods. The highest species biodiversity was observed on grape and must samples taken soon after pressing. Saccharomyces cerevisiae was detected at dominant concentrations during the entire winemaking process.…
Comparison of thermal‐ and photo‐polymerization of lauryl methacrylate monolithic columns for CEC
2009
Lauryl methacrylate-based (LMA) monolithic columns for CEC, prepared using either thermal initiation or by UV-irradiation in the presence of AIBN have been compared. Thermal polymerization was carried out at 70 degrees C for 20 h. For UV initiation, the effects of the time exposure to UV light and irradiation energy were investigated. For each initiation process, the influence of composition of porogenic solvent (1,4-butanediol/1-propanol ratio) on the physical and electrochromatographic properties of the resulting monoliths was also evaluated. Photochemically lauryl methacrylate stationary phases initiated showed higher permeabilities and better efficiencies than those prepared by thermal …
Atomically Precise Alkynyl-Protected Metal Nanoclusters as a Model Catalyst: Observation of Promoting Effect of Surface Ligands on Catalysis by Metal…
2016
Metal nanoclusters whose surface ligands are removable while keeping their metal framework structures intact are an ideal system for investigating the influence of surface ligands on catalysis of metal nanoparticles. We report in this work an intermetallic nanocluster containing 62 metal atoms, Au34Ag28(PhC≡C)34, and its use as a model catalyst to explore the importance of surface ligands in promoting catalysis. As revealed by single-crystal diffraction, the 62 metal atoms in the cluster are arranged as a four-concentric-shell Ag@Au17@Ag27@Au17 structure. All phenylalkynyl (PA) ligands are linearly coordinated to the surface Au atoms with staple "PhC≡C-Au-C≡CPh" motif. Compared with reporte…
Impact of anaerobic dynamic membrane bioreactor configuration on treatment and filterability performance
2017
Abstract Submerged and external anaerobic dynamic membrane bioreactors (AnDMBRs) have been compared in terms of removal efficiency, filtration characteristics and microbial community structure. High COD removal efficiencies were obtained with both submerged and external AnDMBRs. To obtain an effective dynamic membrane (DM) layer enabling high quality permeate, longer time was required in the external AnDMBR configuration compared to the submerged one. A difference in microbial community structure was identified using pyrosequencing analyses between the submerged and external AnDMBRs. The number of archaeal types decreased in the bulk sludge of the external AnDMBR. External sludge recirculat…
Predicting mass fluxes in the pervaporation process using Maxwell-Stefan diffusion coefficients
2018
Abstract In the past decades, it has been proven that pervaporation is an effective and energy-efficient membrane process for the separation of liquids that are difficult to separate in classical processes. The demand for new process applications has increased the need for mass transfer simulation methods, considering the interactions between the system components and the influence of process parameters on the permeation fluxes and at the same time requiring as few experiments as possible. The aim of the study was to find out whether the calculation of mass fluxes of multicomponent fluids based on the system of generalized Maxwell-Stefan equations (GMSE), using Maxwell-Stefan (M-S) diffusio…
Solution Synthesis of a New Thermoelectric Zn1-xSb Nanophase and Its Structure Determination Using Automated Electron Diffraction Tomography
2010
Engineering materials with specific physical properties have recently focused on the effect of nanoscopic inhomogeneities at the 10 nm scale. Such features are expected to scatter medium- and long-wavelength phonons thereby lowering the thermal conductivity of the system. Low thermal conductivity is a prerequisite for effective thermoelectric materials, and the challenge is to limit the transport of heat by phonons, without simultaneously decreasing charge transport. A solution-phase technique was devised for synthesis of thermoelectric "Zn(4)Sb(3)" nanocrystals as a precursor for phase segregation into ZnSb and a new Zn-Sb intermetallic phase, Zn(1+delta)Sb, in a peritectoid reaction. Our …