Search results for "ROC"

showing 10 items of 37446 documents

Deposition of binder-free oxygen-vacancies NiCo2O4 based films with hollow microspheres via solution precursor thermal spray for supercapacitors

2019

Abstract Hollow micro-/nanostructures and oxygen vacancies are highly desirable for supercapacitors due to high active surface area and outstanding electrochemical properties. In order to benefiting from the both effect, binder-free oxygen-vacancies NiCo2O4 based films with hollow microspheres were pioneering directly deposited via one kind thermal spray technology, named solution precursor thermal spray (SPTS) process. To our best knowledge, the rapid one-step SPTS route was firstly employed to synthesize and deposit NiCo2O4 films for supercapacitor applications. The CV data clearly demonstrated that the specific capacitances of more oxygen-deficient NiCo2O4 electrodes with hollow microsph…

010302 applied physicsSupercapacitorHorizontal scan rateNanostructureMaterials scienceProcess Chemistry and Technology02 engineering and technology021001 nanoscience & nanotechnologyElectrochemistry01 natural sciences7. Clean energyCapacitanceSurfaces Coatings and FilmsElectronic Optical and Magnetic MaterialsChemical engineering0103 physical sciencesElectrodeMaterials ChemistryCeramics and Composites[CHIM]Chemical Sciences0210 nano-technologyThermal sprayingCurrent densityCeramics International
researchProduct

Oxy-nitrides characterization with a new ERD-TOF system

2017

Abstract A new time-of-flight (TOF) camera was installed on Elastic Recoil Detection (ERD) measurement setup on the Tandem Accelerator at Universite de Montreal. The camera consists of two timing detectors, developed and built by the Jyvaskyla group, that use a thin carbon foil and microchannel plates (MCP) to produce the start and stop signals. The position of the first detector is fixed at 18 cm from the target, while the position of the second detector can be varied between 50 and 90 cm from the first detector. This allows to increase time resolution by increasing the distance between the time-of-flight detectors or to increase solid angle by decreasing the distance. Moving the detector …

010302 applied physicsToF-ERDANuclear and High Energy PhysicsIon beam analysisMicrochannelMaterials scienceta114Physics::Instrumentation and Detectorsbusiness.industryDetectorSolid angleion beam analysis02 engineering and technology021001 nanoscience & nanotechnology01 natural sciencesSignalelastic recoil detectionElastic recoil detectionOpticsPosition (vector)0103 physical sciences0210 nano-technologybusinessInstrumentationEnergy (signal processing)Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms
researchProduct

FOC with Resolver Implementation for PMSM Drives by Using a Low Cost Atmel SAM3X8E Microcontroller

2020

The aim of this paper is the low-cost experimental implementation of a field oriented control strategy for a Permanent Magnet Synchronous Motor (PMSM) by using an Atmel SAM3X8E microcontroller, mounted on an Arduino DUE board. In this electrical drive for PMSM, a resolver is used in order to measure the rotor position and speed: Therefore, the low-cost Arduino DUE performs not only FOC algorithm and phase currents data acquisition, but also a resolver-To-digital converter process, rotor position and speed data acquisition, and resolver signals management. The code has been implemented in the open source Arduino IDE, using C language, whereas the control and plot visualization interfaces hav…

010302 applied physicsVector controlField oriented Control (FOC)Rotor (electric)business.industryComputer science020208 electrical & electronic engineeringProcess (computing)02 engineering and technologySettore ING-IND/32 - Convertitori Macchine E Azionamenti Elettrici01 natural sciencesElectrical driveslaw.inventionMicrocontrollerPrinted circuit boardData acquisitionmicrocontrollerlawArduinoResolver0103 physical sciences0202 electrical engineering electronic engineering information engineeringPermanent magnet synchronous motor (PMSM)businessComputer hardware2020 Fifteenth International Conference on Ecological Vehicles and Renewable Energies (EVER)
researchProduct

Optical study for springback prediction, thickness reduction and forces variations on single point incremental forming

2019

Abstract The goal of the present work is to present an experimental study regarding the influence of the main technological influence factors such as the vertical step and the punch diameter on the single point incremental forming process (SPIF). In this paper we estimate the influence of these two factors on springback, thickness reduction and forces. Both parameters were varied on two levels: (d) punch diameter 6 and 10 mm and (s) vertical step 0,1 and 0,5 mm. The experiments were done on experimental layout composed by a robot, a clamping system that contains the die’s lower part and the optical system.

010302 applied physicsWork (thermodynamics)Materials sciencebusiness.product_categorybusiness.industryForming processes02 engineering and technologyStructural engineering021001 nanoscience & nanotechnology01 natural sciencesClampingReduction (complexity)0103 physical sciencesRobotDie (manufacturing)Single point0210 nano-technologybusinessMaterials Today: Proceedings
researchProduct

Simulations of the effect of the contact energy levels on a simple model of a hot carrier cell

2016

In the present work, the performance of a simplified model of a hot carrier cell is examined at different energy levels of carrier collection. Incident photons, Monte Carlo generated by employing the ASTM G173-03 data set, are accounted for individually as they interact with the cell. It is assumed that the carriers can be collected ultra-fast, thus avoiding considering hot carrier thermalisation effects. Although the model is preliminary and lacking some mechanisms of hot carrier cells, it has been demonstrated that the present approach to modelling hot carrier solar cells can be developed into fully working models. Some effects of the absorption energy levels in the valence band have been…

010302 applied physicsWork (thermodynamics)SIMPLE (dark matter experiment)PhotonMaterials sciencebusiness.industryMonte Carlo methodElectrical engineering02 engineering and technology021001 nanoscience & nanotechnology01 natural sciencesComputational physicsThermalisationEnergy absorbing0103 physical sciencesValence band0210 nano-technologybusinessEnergy (signal processing)2016 IEEE 43rd Photovoltaic Specialists Conference (PVSC)
researchProduct

Composition dependence ofSi1−xGexsputter yield

2005

Sputtering yields have been measured for unstrained ${\mathrm{Si}}_{1\ensuremath{-}x}{\mathrm{Ge}}_{x}$ $(x=0--1)$ alloys when bombarded with ${\mathrm{Ar}}^{+}$ ions within the linear cascade regime. Nonlinear S-shape dependence of the sputter yield as a function of the alloy composition has been revealed. The dependence is analyzed within the frameworks of the cascade theory conventionally accepted to be the most systematic to date theoretical approach in sputtering. In view of a linear composition dependence predicted for the sputter yield by the cascade theory adapted for polyatomic substrates, the nonlinearity observed in our experiments is shown to be related to the alloying effect on…

010302 applied physicsYield (engineering)Materials scienceDegree (graph theory)Polyatomic ionBinding energy02 engineering and technology021001 nanoscience & nanotechnologyCondensed Matter Physics01 natural sciencesSurface energyElectronic Optical and Magnetic MaterialsCondensed Matter::Materials ScienceSputtering0103 physical sciencesAtomAtomic physics0210 nano-technologyEnergy (signal processing)Physical Review B
researchProduct

Real-time signal processing in embedded systems

2016

International audience

010302 applied physics[ INFO ] Computer Science [cs]business.industryComputer science020206 networking & telecommunications02 engineering and technologycomputer.software_genre01 natural sciencesSignalHardware and Architecture0103 physical sciences0202 electrical engineering electronic engineering information engineeringReal time signal processing[INFO]Computer Science [cs]businessAudio signal processingcomputerSoftwareDigital signal processingComputer hardwareComputingMilieux_MISCELLANEOUS
researchProduct

Very Long Term Stabilization of a 2D Magnet down to the Monolayer for Device Integration

2020

2D materials have recently demonstrated a strong potential for spintronic applications. This has been further reinforced by the discovery of ferromagnetic 2D layers. Nevertheless, the fragility of ...

010302 applied physics[PHYS]Physics [physics]Materials scienceSpintronicsNanotechnology02 engineering and technology021001 nanoscience & nanotechnology01 natural sciencesElectronic Optical and Magnetic MaterialsTerm (time)FragilityFerromagnetismMagnet0103 physical sciencesMonolayerMaterials ChemistryElectrochemistry[PHYS.COND]Physics [physics]/Condensed Matter [cond-mat]0210 nano-technologyComputingMilieux_MISCELLANEOUS
researchProduct

2020

Desulfurization of hydrocarbons is an important step in the processing of petroleum products, which requires an accurate and robust method for the sulfur-containing component evaluation. On the other hand, sulfur-containing heteroatomic hydrocarbon additives are harmful for people and the environment. Therefore, it is advantageous to conduct laboratory tests at low volumes to reduce doses of exposure of sulfur-containing vapors to the personnel. Microfluidics is an emerging platform that provides an advantage to operate with low volumes. The microfluidic dielectric spectroscopy approach is proposed in the current contribution as a platform for determination of the concentration of polar het…

010302 applied physicschemistry.chemical_classificationAnalyteMaterials sciencebusiness.industryMicrofluidicsGeneral Physics and Astronomy02 engineering and technologyDielectric021001 nanoscience & nanotechnology01 natural sciencesDielectric spectroscopyPetroleum productHydrocarbonchemistry0103 physical sciencesGasoline0210 nano-technologyProcess engineeringbusinessMicroscale chemistryAIP Advances
researchProduct

Electrochemical deposition of aniline derivatives for conductometric gas sensors

2019

International audience; Polymer film of poly(2,3,5,6-tetrafluoroaniline) (PTFA) were electroplated on ITO substrate from acidic medium by chronoamperometry. Electrochemical and morphological characterizations were performed and compared to polyaniline properties similarly coated. It seemed that PTFA film had an irreversible redox response with poor conductivity due to the absence of acid-base doping. This film were then incorporated in a patented device called MSDI heterojunction to perform ammonia sensing in humid atmosphere.

010302 applied physicschemistry.chemical_classificationMaterials scienceheterojunctionHeterojunction02 engineering and technologyPolymerConductivityChronoamperometry021001 nanoscience & nanotechnologyElectrochemistryammonia01 natural sciencespolyanilineconductometric sensorschemistry.chemical_compound[CHIM.POLY]Chemical Sciences/PolymersAnilineMonomerchemistryChemical engineering0103 physical sciencesPolyaniline[CHIM.OTHE]Chemical Sciences/Other0210 nano-technologyMaterials Today: Proceedings
researchProduct