Search results for "Recycling"

Dielectric Spectroscopy of Recycled Polylactide

2014

The effects of multiple mechanical recycling on amorphous polylactide (PLA) were simulated by means of five successive injection-grinding cycles. The influence of the induced thermo-mechanical degradation on the dielectric properties of PLA was analysed. The relaxation spectra were studied in terms of the complex dielectric permittivity (ε0 and ε00) and the dielectric loss tangent, tg(d) in the frequency range from 102 to 107 Hz over the temperature interval from 0 C to 140 C. It was possible to distinguish two relaxations zones, one at low temperatures and high frequencies (b relaxation) and another at higher temperatures and lower frequencies (a relaxation). The individual relaxations wer…

Matrix and Filler Recycling of Carbon and Glass Fiber-Reinforced Polymer Composites: A Review

2021

Fiber-reinforced polymers (FRPs) are low-density, high-performance composite materials, which find important applications in the automotive, aerospace, and energy industry, to only cite a few. With the increasing concerns about sustainability and environment risks, the problem of the recycling of such complex composite systems has been emerging in politics, industry, and academia. The issue is exacerbated by the increased use of FRPs in the automotive industry and by the expected decommissioning of airplanes and wind turbines amounting to thousands of metric tons of composite materials. Currently, the recycling of FRPs downcycles the entire composite to some form of reinforcement material (…

Reprocessing and restabilization of greenhouse films

2002

From the ecological and economical points of view, reprocessing of polyethylene greenhouse films is a promising solution to reduce discarded materials and to produce useful, or potentially useful, objects for service. Films exposed outdoors, however, show inferior mechanical properties and the melt processing worsens these properties. The addition of stabilizers and antioxidants to recycled plastic products prevents inherent thermal instabilities from occurring within the time frame of proper processing. In this study, we attempt to explore ways for improving product performance by the addition of four different additives when the recycled films undergo intensive shear processing. The proce…

Recycling polymer blends

2014

Mechanical recycling of polylactide, upgrading trends and combination of valorization techniques

2016

[EN] The upcoming introduction of polylactides in the fractions of polymer waste encourages technologists to ascertain its valorization at the best quality conditions. Mechanical recycling of PLA represents one of the most cost-effective methodologies, but the recycled materials are usually directed to downgraded applications, due to the inherent thermomechanical degradation affecting its mechanical, thermal and rheological performance. In this review, the current state of mechanical recycling of PLA is reported, with special emphasis on a multi-scale comparison among different studies. Additionally, the applications of physical and chemical upgrading strategies, as well as the chances to b…

Performance of asphalt mixes with high recycling rates for wearing layers

2016

The corresponding paper presents selected results of a research on the feasibility of going toward 100% recycling of asphalt pavements into surface courses through an increasing percentage of RA within the mixes. The research is carried out within a two-year CEDR Transnational Road Research project, AllBack2Pave, led by the Technische Universitaet Dresden (Germany), together with the University of Nottingham (UK) and the University of Palermo (Italy), and finalised in January 2016. The main objectives of the project are - to establish, through laboratory tests on binders and asphalt mixes, whether the use of high rates of RA is feasible in developing mixes with high level of durability, and…

Noble gas and CO2 isotopic signatures of the lithospheric mantle underneath Mexico and the Canary Islands: clues from mantle xenoliths and arc lavas

2022

Studying the isotopic composition of fluids trapped in mantle xenoliths opens avenues to understand the origin and cycling of volatiles in the Earth’s upper mantle. In this PhD dissertation, new and in most cases the very first data regarding the isotopic (noble gases and CO2) characterization of the lithospheric mantle portions of three different geodynamic environments are presented: (i) Central and NW Mexico, a continental setting dominated by extension; (ii) the Transmexican Volcanic Belt (TMVB) a subduction setting, and (iii) the Canary Islands, particularly El Hierro and Lanzarote, two oceanic islands formed by mantle plume-derived intraplate volcanism. In total 32 peridotites (includ…

Boosting Ethanol Productivity of Zymomonas mobilis 8b in Enzymatic Hydrolysate of Dilute Acid and Ammonia Pretreated Corn Stover Through Medium Optim…

2019

The presence of toxic degradation products in lignocellulosic hydrolysate typically reduced fermentation rates and xylose consumption rate, resulting in a decreased ethanol productivity. In the present study, Zymomonas mobilis 8b was investigated for high cell density fermentation with cell recycling to improve the ethanol productivity in lignocellulosic hydrolysate. The fermentation performances of Z. mobilis 8b at various conditions were first studied in yeast extract-tryptone medium. It was found that nutrient level was essential for glucose and xylose co-fermentation by Z. mobilis 8b and high cell density fermentation with cell recycling worked well in yeast extract-tryptone medium for …

Micro‐tomographic characterization of composite recycled glass‐silicone foams for applications in civil engineering

2019

Noninvasive X‐ray micro‐computed tomography was applied for a complete quantitative and qualitative analysis of the cellular structure of composite foams constituted by a silicone matrix and a glass production waste filler. Composite foams with different glass filler weight content in the range 0–80% were synthesized and characterized. The tomographic analysis was employed in order to assess the structural heterogeneities, void fraction values, and bubble size distribution for all composite foams. The 3D micro‐CT images analysis, performed at different cross‐sections, highlighted heterogeneous cell growth or more elongated cells in the case of low and high filler content foams, respectively…

Regeneration of total RNA purification silica-based columns

2010

Silica-based columns are largely used in RNA purification, allowing fast extractions and good yields of high quality nucleic acid, but their major limitation is the high cost. The reuse of such columns, although desirable, is not recommended because of residual amounts of material from the previous sample trapped in the column matrix, which might be released during further purification. Thus, recycling does need previous complete removal of any detectable RNA trace, but to date no protocol which allows decontamination and reuse is available.We report a very rapid decontamination procedure, based on treatment with warm alkaline solution containing Triton X-100, which ensures no RNA carry-ove…