Search results for "Resins"
showing 10 items of 176 documents
Quantitative Analysis of Terpenic Compounds in Microsamples of Resins by Capillary Liquid Chromatography
2019
A method has been developed for the separation and quantification of terpenic compounds typically used as markers in the chemical characterization of resins based on capillary liquid chromatography coupled to UV detection. The sample treatment, separation and detection conditions have been optimized in order to analyze compounds of different polarities and volatilities in a single chromatographic run. The monoterpene limonene and the triterpenes lupeol, lupenone, &beta
Preparation and characterization of hexyl methacrylate monolithic columns for CEC
2008
The preparation of hexyl methacrylate (HMA) monolithic columns for CEC separations has been investigated with two initiation systems: (i) ammonium peroxodisulphate and TEMED to activate the polymerization reaction, and (ii) by thermal initiation with AIBN. For both initiators, the influence of composition of porogenic solvent on morphological and chromatographic properties of monoliths was investigated. Two porogenic solvent systems, aqueous and non-aqueous media, were also studied for monolithic beds polymerized with AIBN. Under optimal conditions, low minimum plate heights (9.6 mum for peroxodisulphate, 8.4 and 10.0 mum for AIBN in aqueous and non-aqueous porogenic solvents, respectively)…
Peroxodisulfate as a chemical initiator for methacrylate-ester monolithic columns for capillary electrochromatography
2008
Organic monolithic stationary phases for CEC were synthesized in situ in fused-silica capillaries. Polymerization mixtures were composed of butyl methacrylate, ethylene dimethacrylate, and [2-(methacryloyloxy)ethyl]trimethyl ammonium chloride in the presence of a porogenic solvent, using ammonium peroxodisulfate as chemical initiator, and N,N,N',N'-tetramethylethylenediamine to activate the reaction. The influence of the amount of initiator, temperature, and composition of porogenic solvent on the physical and chromatographic properties of monolithic stationary phases has been investigated. A minimum plate height of 14.5 microm was obtained at 18 wt% of 1,4-butanediol in the polymerization …
Bond strength of selected composite resin-cements to zirconium-oxide ceramic
2012
Objectives: The aim of this study was to evaluate bond strengths of zirconium-oxide (zirconia) ceramic and a selection of different composite resin cements. Study Design: 130 Lava TM cylinders were fabricated. The cylinders were sandblasted with 80 μm aluminium oxide or silica coated with CoJet Sand. Silane, and bonding agent and/or Clearfil Ceramic Primer were applied. One hundred thirty composite cement cylinders, comprising two dual-polymerizing (Variolink II and Panavia F) and two autopolymerizing (Rely X and Multilink) resins were bonded to the ceramic samples. A shear test was conducted, followed by an optical microscopy study to identify the location and type of failure, an elec…
Micro-analytical identification of the components of varnishes from South Italian historical musical instruments by PLM, ESEM-EDX, microFTIR, GC-MS, …
2014
Abstract A multi-analytical investigation was carried out to study varnish micro-samples from historical stringed musical instruments from the collection of the “Vincenzo Bellini” Conservatory in Palermo (Italy). This paper reports on the results of the application of five micro-destructive techniques: optical microscopy analysis of cross-sections, micro-Fourier transform infrared spectroscopy, gas chromatography coupled with mass spectrometry, pyrolysis gas chromatography coupled with mass spectrometry with thermochemolysis, and environmental scanning electron microscopy with X-ray microanalysis. The study provides microchemical information about the composition of the varnishes of the ins…
Analysis of neuropeptide Y and its metabolites by high-performance liquid chromatography-electrospray ionization mass spectrometry and integrated sam…
2000
A novel restricted access cation exchanger with sulphonic acid groups at the internal surface was proven to be highly suitable in the sample clean up of peptides on-line coupled to HPLC-electrospray ionization (ESI)-MS. Neuropeptide Y (NPY) and several of its fragments in plasma were subjected to the sample clean-up procedure. The peptides were eluted by a step gradient from the restricted access column, applying 10 mM phosphate buffer pH 3.5 from 5 to 20% (v/v) of acetonitrile with 1 M NaCl and transferred to a Micra ODS II column (33x4.6 mm). The separation of the peptides and their fragments was performed by a linear gradient from 20 to 60% (v/v) acetonitrile in water with 0.1% formic ac…
Enrichment of proteinaceous materials on a strong cation-exchange diol silica restricted access material: protein–protein displacement and interactio…
2004
A study of size exclusion and enrichment of proteins employing strong cation-exchange diol silica restricted access material (SCX-RAM) under saturation conditions is presented. Experiments were carried out with bacitracin, protamine, ribonuclease, lysozyme and bovine serum albumin as individual proteinaceous analytes as well as comprehensive binary mixtures and with human urine samples. Protein size dependent capacity features of the SCX-RAM column was observed. Bacitracin demonstrated the highest capacity followed by protamine while adsorption capacities of both ribonuclease and lysozyme were found smaller by a factor of 10. Applying binary protein samples occurring displacement effects we…
Chemical and dimensional evolution of cationic ions exchange resins in cement pastes
2013
Ion exchange resins (IERs) are widely used by the nuclear industry to decontaminate radioactive effluents. After use they are usually encapsulated in cementitious materials. However, the solidified waste forms can exhibit a strong expansion, possibly leading to cracking. Its origin is not well understood as well as the conditions when it occurs.In this work, the interactions between cationic resins in the Na+ or Ca2+ form and tricalcium silicate (C3S), Portland cement (CEM I) or Blastfurnace slag cement (CEM III/C) are investigated at an early age in order to gain a better understanding of the expansion process.The results show that during the hydration of a paste of C3S or CEM I containing…
Prosthetically‐Driven Full‐Mouth Implant‐Supported Prostheses Using Guided Surgical Implant Planning with Composite Resin Markers: A Case Report
2021
This report describes a prosthetically-driven implant planning method, guided by the alignment procedures between the cone beam computed tomography, intraoral digital scans, and digitized maxillary and mandibular interim complete dentures using intraoral composite resin markers as a common reference. The markers were attached to the keratinized oral mucosa of the edentulous ridges using cyanoacrylate and kept in place during the digitizing procedures. The technique provides a simpler and more economical alternative to conventional prosthetically-driven static implant planning methods.
The effect of light curing units and modes on cytotoxicity of resin-core systems
2010
Objective: The aim of this study was to compare the cytotoxic effects of various resin-based core materials that were cured with three light curing units (LCUs) in different modes on L?929 mouse fibroblast cells over 24 h and 72 h periods. Study design: Eighty-four cylindrical discs (2 mm in thickness and 6 mm in diameter) of each material (Rebilda, Voco; Build-It FR, Pentron; Clearfil DC Core, Kuraray and Bis-core, Bisco) were cured by QTH LCU (soft-up and high-power modes), LED LCU (exponential and standard modes) and PAC LCU (normal and ramp-curing modes). Then the samples were aged for 24 and 72 hours in Dulbecco?s Modified Eagle Medium/Ham?s F12 (DMEM/F12). After each ageing interval, …