Search results for "Response surface methodology"
showing 10 items of 50 documents
Analysis of stamping performances of dual phase steels: A multi-objective approach to reduce springback and thinning failure
2009
The industrial interest on light weight components has contributed in the last years to a significant research effort on new materials able to guarantee high mechanical properties, good formability and reasonable costs together with reduced weights when compared to traditional mild steels. Among such materials advanced high strength steels (AHSS) such as transformations induced plasticity (TRIP) and dual phase (DP), and light weight alloys proved their usefulness in stamping of automotive components. As AHSS are concerned, one of the main drawbacks is related to springback occurrence. Many aspects have to be taken into account when springback reduction is investigated: material behavior iss…
Purification of recovered phosphoric acid by extracting aluminium with di-2-ethylhexyl phosphoric acid
2021
AbstractThe extraction of aluminium from dilute phosphoric acid with di-2-ethylhexyl phosphoric acid (DEHPA) was optimized using response surface methodology. The optimization was based on the experimental three-level central composite face-centred design (CCF) and was conducted on real-life samples. The three variables included were pH, extractant concentration and aqueous to organic phase ratio (AO). Under the optimized conditions (pH 2.5, 0.6 M DEHPA and AO ratio 1:2), extraction efficiency of 99% for aluminium in four extraction stages is achieved. The purified phosphoric acid solution can then be utilized by the fertilizing industry. Stripping tests for organic phase loaded with alumin…
Optimization of Polyphenols' Recovery from Purple Corn Cobs Assisted by Infrared Technology and Use of Extracted Anthocyanins as a Natural Colorant i…
2022
An ecofriendly extraction technology using infrared (IR) irradiation Ired-Irrad® was applied to purple corn cobs to enhance polyphenol recovery for the first time. The IR extraction efficiency was compared to that of the water bath (WB) method. Response surface methodology (RSM) using a central composite design was conducted to determine the effect of the experimental conditions (extraction time and treatment temperature) and their interactions on the total polyphenol and anthocyanin yields. Optimal extraction of total phenolic compounds (37 mg GAE/g DM) and total monomeric anthocyanins (14 mg C3G/g DM) were obtained at 63 °C for 77 min using IR as an extraction technique and water as a sol…
Efficient extraction and preparative separation of four main isoflavonoids from Dalbergia odorifera T. Chen leaves by deep eutectic solvents-based ne…
2016
In this study, green and efficient deep eutectic solvent-based negative pressure cavitation-assisted extraction (DES-NPCE) followed by macroporous resin column chromatography was developed to extract and separate four main isoflavonoids, i.e. prunetin, tectorigenin, genistein and biochanin A from Dalbergia odorifera T. Chen leaves. The extraction procedure was optimized systematically by single-factor experiments and a Box-Behnken experimental design combined with response surface methodology. The maximum extraction yields of prunetin, tectorigenin, genistein and biochanin A reached 1.204, 1.057, 0.911 and 2.448mg/g dry weight, respectively. Moreover, the direct enrichment and separation of…
On the self-heating behavior of upgraded biochar pellets blended with pyrolysis oil: Effects of process parameters
2020
Abstract Biochar obtained from biomass pyrolysis is a promising carbon neutral material which can be used in substitution of fossil coal and coke in metallurgical applications. Biochar’s mechanical properties improve significantly without compromising reactivity, when upgraded by densification with pyrolysis oil and reheated. However, upgraded biochar pellets use in the industry is limited due to the risks associated with self-heating. This issue must be seriously considered for further industrial production of upgraded biochar pellets. Self-heating oven tests are generally time-consuming and limit the possibility of testing various potential solutions. The aim of this work was both to inve…
High pressure processing of fruit juice mixture sweetened with Stevia rebaudiana Bertoni: Optimal retention of physical and nutritional quality
2013
Abstract The impact of high pressure processing (HPP) technology on physicochemical properties (color, browning index, turbidity index), bioactive compounds (ascorbic acid, total phenolic compounds, total anthocyanins, total carotenoids) and antioxidant capacity of a fruit juice mixture (papaya (32.5%, v/v), mango (10%, v/v) and orange (7.5%, v/v)) sweetened with Stevia rebaudiana Bertoni at different percentages was studied. The experimental design comprised a response surface methodology according to a central composite face-centered design. The variable ranges were 300–500 MPa (pressure), 5–15 min (time), 0–2.5% Stevia percentage. This design was used to determine the optimal high pressu…
Green extraction approach for the recovery of polyphenols from Croatian olive leaves (Olea europea)
2017
Abstract Pressurized liquid extraction (PLE) is shown as an innovative green technology for the effective extraction of the various phytochemicals from food by-products, therefore the aims of this study were to evaluate the application of PLE to engineer green extracts of Croatian olive leaves ( Olea europaea , cv. Oblica) for potential industrial production (functional foods/pharmaceuticals). PLE was conducted under various cycle numbers (1, 2), temperature (60, 80, 100 °C) and static times (5, 10, 15 min). Obtained extracts were characterized in terms of: (i) total polyphenols (TP); (ii) total flavonoids (TF); hydroxycinnamic acids (HCA); and (iv) flavonols (FLA). Response surface methodo…
Effective Recovery Process of Copper from Waste Printed Circuit Boards Utilizing Recycling of Leachate
2020
AbstractThis study presents an optimized leaching and electrowinning process for the recovery of copper from waste printed circuit boards including studies of chemical consumption and recirculation of leachate. Optimization of leaching was performed using response surface methodology in diluted sulfuric acid and hydrogen peroxide media. Optimum leaching conditions for copper were found by using 3.6 mol L−1 sulfuric acid, 6 vol.% hydrogen peroxide, pulp density of 75 g L−1 with 186 min leaching time at 20°C resulting in complete leaching of copper followed by over 92% recovery and purity of 99.9% in the electrowinning. Study of chemical consumption showed total decomposition of hydrogen pero…
Increasing Yield and Antioxidative Performance of Litchi Pericarp Procyanidins in Baked Food by Ultrasound-Assisted Extraction Coupled with Enzymatic…
2018
Extraction with organic solvents is a traditional method to isolate bioactive compounds, which is energy-wasting and time-consuming. Therefore, enzyme and ultrasound treatments were combined to assist the extraction of oligomeric procyanidins from litchi pericarp (LPOPC), as an innovative approach to replace conventional extraction methods. Under optimum conditions (enzyme concentration 0.12 mg/mL, ultrasonic power 300 W, ultrasonic time 80 min, and liquid/solid ratio 10 mL/g), the yield of LPOPC could be improved up to 13.5%. HPLC analysis indicated that the oligomeric procyanidins (OPC) content of LPOPC from proposed extraction was up to 89.6%, mainly including (&minus
Optimization of Spray-Drying Process of
2019
Jerusalem artichoke is an important natural matrix for inulin production. In this experiment, response surface methodology (RSM) was employed to optimize the spray-drying parameters in order to determine the maximal inulin yield. For this study, three independent variables (heating temperature (Tª, 110–120 °C), creep speed (V, 18–22 rpm) and pressure (P, 0.02–0.04 MPa)) were used in the experimental design. Using the Box–Behnken design, the optimal parameters obtained were: drying temperature 114.6 °C, creep speed 20.02 rpm, and pressure: 0.03 MPa. The inulin yield, water content and particle size of inulin obtained by spray-drying and freeze-drying were compared. In this regard, the spray-…