Search results for "Rheometry"
showing 10 items of 20 documents
Polyamide/carbonaceous particles nanocomposites fibers: Morphology and performances
2015
In this work, the influence of carbonaceous particles with different sizes and shapes on the morphology and mechanical performances of polyamide (PA)-based fibers was investigated. Graphene nanoplatelets (GNP) are compared with spherical and rod-like carbon fillers such as carbon black (CB) and multiwall carbon nanotubes (CNTs). The increments of the complex viscosity as well as elastic and loss moduli, in the melt state, assessed by rheological analysis, are reduced by modifying polyamide (PA) matrix with nanofillers in a following order: CNTs > GNP > CB. All the nanocomposites, however, show viscosity and moduli higher than those of neat PA. The CB loading causes a mere increase of the vi…
Rheological characterization of chitosan matrices: Influence of biopolymer concentration
2007
Viscoelastic properties of chitosan (CH), chitosan-poly(ethylene glycol) 400 (CH-PEG), and chitosan-poly(ethylene glycol) 400 with glyoxal as crosslinking agent (CH-PEG-Gly) systems were studied to analyze the effect of chitosan concentration (from 0.83 to 1.67%). Dynamic moduli increase as chitosan concentration increases for all systems. For CH and CH-PEG systems the loss modulus (G″) is greater than the storage modulus (G′) with predominance of the viscous over the elastic behavior. This corresponds to the characteristic behavior of solutions (nonstructured systems). The presence of PEG 400 induces a complementary reinforcement of the mechanical properties of the system. Except for the l…
Improving the rheometry of rubberized bitumen: experimental and computation fluid dynamics studies
2017
Abstract Multi-phase materials are common in several fields of engineering and rheological measurements are intensively adopted for their development and quality control. Unfortunately, due to the complexity of these materials, accurate measurements can be challenging. This is the case of bitumen-rubber blends used in civil engineering as binders for several applications such as asphalt concrete for road pavements but recently also for roofing membranes. These materials can be considered as heterogeneous blends of fluid and particles with different densities. Due to this nature the two components tends to separate and this phenomenon can be enhanced with inappropriate design and mixing. Thi…
Acyclovir Delivery Matrices Based on Poly(Ethylene Glycol)/Chitosan Semi-Interpenetrating Networks
2007
Abstract Chitosan matrix systems have been studied as potential vehicles for the prolonged release of acyclovir (ACV). The influence of chitosan concentration (from 0.83% to 1.67%) on viscoelastic properties of formulations with and without glyoxal was analyzed. For chitosan‐poly(ethylene glycol) 400 formulations loss modulus ( G ″) are greater than storage modulus ( G ′). This corresponds to the characteristic behavior of nonstructured systems. When glyoxal was added to the chitosan‐poly(ethylene glycol) 400 formulations, gelled matrix was obtained (i.e., G ′ is higher than G ″), except for the lowest chitosan concentration. ACV release rates for the both types of systems, with and without…
Steady and oscillatory shear behaviour of semi-concentrated starch suspensions
2011
The viscoelastic moduli G’ and G” of aqueous suspensions with 40% (w/v) normal corn starch (NCS) and waxy corn starch (WCS) were determined by oscillation rheometry. The oscillatory shear flow experiments at heating from 30° to 75 °C and maintaining at this temperature showed changes from a behaviour predominant viscous (G”>>G’) to predominant elastic (G’>G”) for both starches at 60.5 °C for WCS, respectively 70,85 °C for NCS, WCS having higher values of G’ and G” as NCS. After the gelatinisation temperature was attired, NCS showed no significant changes, both moduli remaining relatively constant. Peaks of both moduli G’ and G” were obtained for WCS at its maintaining at 75oC, these changes…
Time-resolved rheology as a tool to monitor the progress of polymer degradation in the melt state - Part I: Thermal and thermo-oxidative degradation …
2015
Abstract Thermal and thermo-oxidative degradation of polyamide 11 (PA11) in the melt state (T = 215 °C) are studied by resorting to time-resolved mechanical spectroscopy. Such an approach allows to elude the changes in the rheological properties occurring while testing, thus enabling the rigorous study of polymer degradation in the melt state. Different concurrent degradation reactions in oxidative (air) and non-oxidative (N2) environment are promptly guessed by studying the time evolutions of rheological functions. In particular, changes in the zero-frequency complex viscosity reflects changes in the average molecular weight, while the appearance of a yield stress in the complex viscosity …
Effects of solvent perturbation on gelation driven by spinodal demixing
1999
We study effects of solvent perturbation on kinetic competition between spinodal demixing and gelation in agarose solutions at a concentration of 5 g/l. Two different cosolutes (tert-butyl alcohol and trimethyl amine N-oxide) known for altering in opposite way solvent-mediated interactions are chosen. By rheometry, static and dynamic light scattering experiments, we show that the cosolute presence shifts the boundary of the instability region of solution leaving unaffected temperature and polymer concentration values required for percolation. Results suggest that an appropriate choice of quenching temperature and solvent allows controlling the gelation time and the gel structural properties.
Aggregation Processes and Formation of Silico-calco-alkaline Gels under High Ionic Strength
2002
This paper presents a systematic in situ study of the process of formation of silico-calco-alkaline gels starting from a liquid colloidal solution containing different alkaline ions and different calcium concentration until the final gel state. The combined use of X-ray and neutron small-angle scattering (SAS) and dynamical rheometry techniques lead to a consistent description of the structure of the aggregates and of the mechanisms of aggregation involved in gel formation. SAS results indicate that the aggregates are fractal objects, their structure strongly depending on calcium ion concentration. The differences in gelation kinetics for systems containing different alkaline ions were attr…
Protein Adsorption Hysteresis and Transient States of Fibrinogen and BMP-2 as Model Mechanisms for Proteome-Binding to Implants
2020
Abstract Protein adsorption studies returned to the focus of medical therapeutics, when it was found that up to 2500 non-plasma proteins adsorbed to hip implants during arthroplastic surgery, challenging peri-implant healing models. Questions have re-emerged as to the implications of uncontrolled protein unfolding after adsorption. In past studies on the cooperativity of protein binding we discovered protein adsorption hysteresis, a thermodynamically irreversible process. The present precursory study comprises real-time kinetic (TIRF-Rheometry) and equilibrium (125I-tracer ) studies on the hysteretic binding of fibrinogen and rhBMP-2 to titanium and glass surfaces via transient states. Ther…
Healon5 viscoadaptive formulation: Comparison to Healon and Healon GV
2001
Abstract Purpose To compare the rheological characteristics of a viscoadaptive viscoelastic formulation with those of 2 standard ophthalmic viscosurgical devices (OVDs). Setting Department of Ophthalmology, Johannes Gutenberg-University, and Max Planck-Institute for Polymer Research, Mainz, Germany. Methods An independent comparative study of 3 OVDs of sodium hyaluronate (Healon®, Healon GV®, and Healon®5) was performed using the Advanced Rheometric Expansion System to analyze rheologic behavior (eg, dynamic frequency dependence of the complex viscosity) as well as rheological parameters (eg, viscosity at zero shear rate, pseudoplasticity, relaxation time, elastic and viscous modulus). Resu…