Search results for "Ribb"
showing 10 items of 153 documents
Simplified Model for Compressive Behavior of Concrete Columns Strengthened by Steel Angles and Strips
2010
This paper presents an analytical model to determine the compressive response of concrete members, having a square transverse cross section and reinforced with steel angles at the corners and steel strips connecting the steel angles. The model evaluates the effects of transverse strips and steel angles on confinement pressures, including strength and buckling phenomena. Compressive response was evaluated in cases of directly and indirectly loaded elements. The data produced correlate well with available experimental data.
Effect of Fiber-Reinforced Composite and Elastic Post on the Fracture Resistance of Premolars with Root Canal Treatment—An In Vitro Pilot Study
2020
(1) Background: To analyze the fracture resistance of endodontically upper premolar teeth restored with glass fiber reinforced posts, glass fiber elastic posts, conventional composite resin (CR) and glass fiber reinforced composite (FRC) resins as restorations. (2) Methods: Seventy premolars were submitted to root canal treatment and restored with the following restorative materials (n = 10): A. FRC posts restored with resin
Improved Testing Setup for Real-Time Monitoring of PMBs During Manufacturing and Rotational Viscosity Measurements
2021
Polymer modified binders (PMBs) are a practical solution to design asphaltmixtures with superior performance. Although these polymers often improve bitumen properties to some extent, their final performance are linked to the accurate control of the properties during manufacturing and storage. However, some of the common procedures used to characterise neat bitumen are not suitable with these binders making their characterisation challenging. This study presents a novel laboratory procedure to produce SBS-MB through a real-time monitoring of the rotational viscosity, as well as an attempt to understand the suitability of current testing geometries to measure viscosity of such a complex bitum…
A stable path to ferromagnetic hydrogenated graphene growth
2014
In this paper, we propose a practical way to stabilize half-hydrogenated graphene (graphone). We show that the dipole moments induced by an hexagonal-boron nitride (h-BN) substrate on graphene stabilize the hydrogen atoms on one sublattice of the graphene layer and suppress the migration of the absorbed hydrogen atoms. Based upon first principle spin polarized density of states (DOS) calculations, we show that the half hydrogenated graphene (graphone) obtained in different graphene-h-BN heterostructures exhibits a half metallic state. We propose to use this new exotic material for spin valve and other spintronics devices and applications.
Dimensional Confinement in Carbon-based Structures - From 3D to 1D
2017
We present an overview of charge transport in selected one-, two- and three-dimensional carbon-based materials with exciting properties. The systems are atomically defined bottom-up synthesized graphene nanoribbons, doped graphene and turbostratic graphene micro-disks, where up to 100 graphene layers are rotationally stacked. For turbostratic graphene we show how this system lends itself to spintronic applications. This follows from the inner graphene layers where charge carriers are protected and thus highly mobile. Doped graphene and graphene nanoribbons offer the possibility to tailor the electronic properties of graphene either by introducing heteroatoms or by confining the system geome…
The effect of annealing temperature and time on synthesis of graphene thin films by rapid thermal annealing
2015
In this paper, we performed synthesis of graphene thin films by rapid thermal annealing (RTA) of thin nickel copper (Ni/Cu) layers deposited on spectroscopic graphite as a carbon source. Furthermore, we investigated the effect of annealing temperature and annealing time on formation and quality of synthesized graphene films. Raman spectroscopy study showed that annealing at lower temperatures results in formation of monolayer graphene films, while annealing at higher temperatures results in formation of multilayer graphene films. We used Raman mapping to determine the distribution of graphene sheets. Surface morphology of graphene thin films was investigated by atomic force microscopy and s…
The development of nature-inspired gripping system of a flat CFRP strip for stress-ribbon structural layout
2021
Abstract The elegant stress-ribbon systems are efficient in pedestrian bridges and long-span roofs. Numerous studies defined corrosion of the steel ribbons as the main drawback of these structures. Unidirectional carbon fiber-reinforced polymer (CFRP) is a promising alternative to steel because of lightweight, high strength, and excellent corrosion and fatigue resistance. However, the application of CFRP materials faced severe problems due to the construction of the anchorage joints, which must resist tremendous axial forces acting in the stress-ribbons. Conventional techniques, suitable for the typical design of the strips made from anisotropic material such as steel, are not useful for СF…
Quality control of manufacturing and hot storage of crumb rubber modified binders
2020
The ultimate performance of crumb rubber modified (CRM) binders is linked to the accurate control of the properties during manufacturing and hot storage. However, due to their complexity, asphalt technologists find the characterisation of these materials still challenging. In this study, the adoption of a Dual Helical Ribbon (DHR), a novel mixing/measuring device for rotational viscometers, is proposed for the real-time monitoring of CRM binders during manufacturing and hot storage. According to the laboratory results, manufacturing periods of 45-60 min at 195 degrees, as well as storage temperatures not exceeding 150 degrees C, are recommended for this type of modified binders. (C) 2019 El…
Limits of stability in supported graphene nanoribbons subject to bending
2016
Graphene nanoribbons are prone to in-plane bending even when supported on flat substrates. However, the amount of bending that ribbons can stably withstand remains poorly known. Here, by using molecular dynamics simulations, we study the stability limits of 0.5-1.9 nm wide armchair and zigzag graphene nanoribbons subject to bending. We observe that the limits for maximum stable curvatures are below ~10 deg/nm, in case the bending is externally forced and the limit is caused by buckling instability. Furthermore, it turns out that the limits for maximum stable curvatures are also below ~10 deg/nm, in case the bending is not forced and the limit arises only from the corrugated potential energy…
Optical and electronic properties of graphene nanoribbons upon adsorption of ligand-protected aluminum clusters
2014
We have carried out first-principles calculations to investigate how the electronic and optical features of graphene nanoribbons are affected by the presence of atomic clusters. Aluminum clusters of different sizes and stabilized by organic ligands were deposited on graphene nanoribbons from which the energetic features of the adsorption plus electronic structure were treated within density-functional theory. Our results point out that, depending on their size and structure shape, the clusters perturb distinctively the electronic properties of the ribbons. We suggest that such selective response can be measured through optical means revealing that graphene nanoribbons can work as an efficie…