Search results for "Rutile"

Flash annealing influence on structural and electrical properties of TiO2/TiO/Ti periodic multilayers

2014

Abstract Multilayered structures with a 40 nm period composed of titanium and two different titanium oxides, TiO and TiO 2 , were accurately produced by DC magnetron sputtering using the reactive gas pulsing process. These multilayers were sputtered onto Al 2 O 3 sapphire to avoid substrate compound diffusion during flash annealing (ranging from 350 °C to 550 °C). Structure and composition of these periodic TiO 2 /TiO/Ti stacks were investigated by X-ray diffraction, X-ray photoemission spectroscopy and transmission electronic microscopy techniques. Two crystalline phases α-Ti and fcc-TiO were identified in the metallic-rich sub-layers whereas the oxygen-rich ones were composed of a mixture…

The interdependence of structural and electrical properties in TiO2/TiO/Ti periodic multilayers

2013

International audience; Multilayered structures with 14-50 nm periods composed of titanium and two different titanium oxides, TiO and TiO2, were accurately produced by DC magnetron sputtering using the reactive gas pulsing process. The structure and composition of these periodic TiO2/TiO/Ti stacks were investigated by X-ray diffraction and transmission electronic microscopy techniques. Two crystalline phases, hexagonal close packed Ti and face centred cubic TiO, were identified in the metallic-rich sub-layers, whereas the oxygen-rich ones comprised a mixture of amorphous TiO2 and rutile phase. DC electrical resistivity rho measured for temperatures ranging from 300 to 500 K exhibited a meta…

Effect of oxidation post treatments on TiO2 coating manufactured using reactive very low-pressure plasma spraying (R-VLPPS)

2020

Abstract TiO2 coatings manufactured using reactive very low-pressure plasma spraying (R-VLPPS) were analyzed in different regions related to their position compared to the plasma flame. For that, a screen was used in order to hide an area of the substrate from the direct plasma flux. The coating morphology changed from quasi lamellar structure to highly vapor structure and coatings exhibited obvious modifications in terms of phases and mechanical properties. The effect of oxidation post treatment on the as sprayed coating was then studied by selecting two methods: in situ oxidation post treatment and classical thermal treatment. The two post treatments provided an increase of the main rutil…

A New LA ‐ ICP ‐ MS Method for Ti in Quartz: Implications and Application to High Pressure Rutile‐Quartz Veins from the Czech Erzgebirge

2016

Experimental determination of the pressure and temperature controls on Ti solubility in quartz provides a calibration of the Ti-in-quartz (TitaniQ) geothermometer applicable to geological conditions up to ~ 20 kbar. We present a new method for determining 48Ti mass fractions in quartz by LA-ICP-MS at the 1 μg g−1 level, relevant to quartz in HP-LT terranes. We suggest that natural quartz such as the low-CL rims of the Bishop Tuff quartz (determined by EPMA; 41 ± 2 μg g−1 Ti, 2s) is more suitable than NIST reference glasses as a reference material for low Ti mass fractions because matrix effects are limited, Ca isobaric interferences are avoided, and polyatomic interferences at mass 48 are i…

ASSESSING TRACE ELEMENT (DIS)EQUILIBRIUM AND THE APPLICATION OF SINGLE ELEMENT THERMOMETERS IN METAMORPHIC ROCKS

2018

Abstract Empirical and experimental calibration of single element solubility thermometers, such as Zr-in-rutile, Zr-in-titanite, Ti-in-zircon, and Ti-in-quartz, within the past 13 years has greatly expanded our ability to assess the pressure and temperature conditions of individual minerals associated with specific textures in metamorphic rocks. Combined with advances in in situ techniques for analyzing trace concentrations, this has led to an increase in the combined use of single element thermometers, geochronometers, and isotope ratios, often simultaneously, in metamorphic minerals. Here we review the calibration and application of single element thermometers at the pressure and temperat…

PHOTOCATALYTIC ACTIVITY OF TIO2 IN ITS POLYMORPHIC FORMS ANATASE, BROOKITE AND RUTILE

2012

Determination of the crystallinity of TiO2 photocatalysts

2018

Abstract This study reports a new simple method to determine the crystallinity of anatase and rutile TiO2 photocatalysts. The crystallinity degree of various anatase and rutile samples was estimated by XRD analysis from the ratio among the full width at half maximum intensities of the main diffraction peaks of anatase or rutile and the (111) peak of CaF2 as internal standard. The photocatalytic activity of selected powders was tested employing the photodegradation of 4-nitrophenol in aqueous solution as probe reaction. The results showed that the photoactivity of the investigated samples increased with increasing crystallinity and crystallite size.

Photocatalytic activity of nanocrystalline TiO2 (brookite, rutile and brookite-based) powders prepared by thermohydrolysis of TiCl4 in aqueous chlori…

2008

Abstract Nanocrystalline TiO2 powders were synthesized by thermohydrolysis of TiCl4 in HCl or NaCl aqueous solutions. Rutile, mixtures of brookite and rutile or mixtures of anatase, brookite and rutile were obtained depending on the acidity of the medium. Crystalline phases and composition of the mixtures were identified by using XRD analysis. Pure brookite nanoparticles, separated from the mixtures of brookite and rutile by simple peptization with water, were stable against transformation to rutile up to 750 °C. The prepared TiO2 powders were characterized by thermal analysis, diffuse reflectance spectroscopy and BET surface area determinations. The band gap of bulky brookite was estimated…

Photocatalytic degradation of phenol in aqueous titanium dioxide dispersions

1988

The results of a study of photocatalytic degradation of phenol using aqueous oxygenated TiO2 (anatase) suspensions in a batch Pyrex photoreactor are reported. The influence on the photodegradation rate of various parameters as pH, phenol and TiO2 content, oxygen partial pressure, anions present in the dispersions was investigated. A complete oxidation of phenol was observed. Intermediate compounds, catechol and quinone, were detected. It was observed that the photodegradation also proceeded with sunlight radiation. A mechanistic and kinetic model, which accounts for the results obtained, is given. Likely reasons for inactivity of the rutile modification for this reaction are also given.

Influence of metallic silver and of platinum-silver bimetallic deposits on the photocatalytic activity of titania (anatase and rutile) in organic and…

1998

Abstract The influence of deposited silver upon the photocatalytic activity of titania in the rutile and anatase allotropic forms has been studied in three different reactions. The common feature found for these three reactions was an electron transfer from illuminated TiO 2 to silver particles. In the first reaction (platinum photodeposition). it has been shown that the initial presence of metallic silver orientates the localization of subsequent Pt photodeposits with, in particular, a 100% selectivity to Pt deposition on top of silver particles or agglomerates previously deposited on anatase. In the second reaction (2-propanol oxidation), Ag deposit was found beneficial for the activity o…