Search results for "SANITARIA"

showing 10 items of 520 documents

DENITRIFICAZIONE BIOLOGICA DELLE ACQUE DI FALDA MEDIANTE L’USO DI BARRIERE REATTIVE PERMEABILI

2012

BARRIEREFALDASettore ICAR/03 - Ingegneria Sanitaria-AmbientaleDENITRIFICAZIONE
researchProduct

Bacterial Community Structure of an IFAS-MBRs Wastewater Treatment Plant

2017

TIn this work, the bacterial community putatively involved in BNR events of a UCT-MBMBR pilot plant was elucidated by both culture-dependent and metagenomics DNA analyses. The presence of bacterial isolates belonging to Bacillus (in the anoxic compartment) and to Acinetobacter, Stenotrophomonas, Rhodococcus, Escherichia and Aeromonas (in the aerobic compartment) is in agreement with the nitrification/denitrification processes observed in the plant. Moreover, the study of bacterial community structure by NGS revealed a microbial diversity suggesting a biochemical complexity which can be further explored and exploited to improve UCT-MBMBR plant performance.

Bacterial communities NGS Biological nutrient removal Wastewater treatment plant Membrane bioreactors MBBR Enhanced biological phosphorus removal IFAS-MBRDenitrificationbiologySettore ICAR/03 - Ingegneria Sanitaria-AmbientaleWastewater treatment plantIFAS-MBRfungiMembrane Bioreactorfood and beveragesAcinetobacterbiology.organism_classificationSettore BIO/19 - Microbiologia GeneraleAnoxic watersBiological Nutrient RemovalMicrobiologyAeromonasMetagenomicsNGSMBBREnhanced biological phosphorus removalNitrificationStenotrophomonasRhodococcusBacterial Communitie
researchProduct

Assessing the Feasibility of Wastewater Finishing Treatment by Modified Sand Filters.

2014

The purpose of this study was to investigate the performance of the modified biosand filtration at lab scale. The traditional biosand filter arrangement was modified adding a 2nd stage to the traditional single one. Pre-clarified wastewater first flows down through different filtration material layers; then flows upward in the second stage through other three - and finer - filtration layers including small gravel at the bottom, fine sand and small gravel again. During the experiment timespan (90 days) daily results were collected, analysed and tabled at the laboratories of the Publicly Owned Wastewater Treatment Station – Palermo, operated by AMAP. The analysis included bacteriological para…

Bio-sand filtrationSettore ICAR/03 - Ingegneria Sanitaria-Ambientalesustainable water treatmenteffluent finishing
researchProduct

A hydrodynamic water quality model for propagation of pollutants in rivers.

2010

Numerical modelling can be a useful tool to assess a receiving water body's quality state. Indeed, the use of mathematical models in river water quality management has become a common practice to show the cause-effect relationship between emissions and water body quality and to design as well as assess the effectiveness of mitigation measures. In the present study, a hydrodynamic river water quality model is presented. The model consists of a quantity and a quality sub-model. The quantity sub-model is based on the Saint Venant equations. The solution of the Saint Venant equations is obtained by means of an explicit scheme based on space-time conservation. The method considers the unificatio…

Biochemical oxygen demandState variableEnvironmental EngineeringQuality managementpollution propagationSettore ICAR/03 - Ingegneria Sanitaria-AmbientaleMathematical modelAdvectionadvectionSettore ICAR/02 - Costruzioni Idrauliche E Marittime E IdrologiaEnvironmental engineeringModels TheoreticalItalyRiversData qualityEnvironmental sciencedispersionWater qualityunsteady flowShallow water equationsMonte Carlo MethodWater Pollutants Chemicalreceiving streamWater Science and TechnologyEnvironmental MonitoringWater science and technology : a journal of the International Association on Water Pollution Research
researchProduct

Optimization of acetate production from citrus wastewater fermentation

2021

Abstract Citrus wastewater is a sugar-rich waste stream suitable for the recovery of energy of material from its treatment. In this study, fermentation of citrus wastewater was carried out to assess the optimal conditions to maximize the bioconversion of the organic substrate into acetate. Unbalanced nutrient (C: N: P 200:0.1:0.1) enabled the highest acetate production. The presence of the particulate organic fraction enabled to obtain a higher acetate concentration regardless the initial COD concentration. Initial pH values higher than 5 did not cause substantial differences on the maximum bioconversion of COD into acetate in Trial 3, whereas pH lower than 5 hindered the hydrolysis process…

BioconversionBioconversion0208 environmental biotechnologyGeography Planning and Development02 engineering and technology010501 environmental sciences01 natural sciencesHydrolysisNutrientManagement. Industrial management0105 earth and related environmental sciencesWater Science and TechnologyCitrus wastewaterAnaerobic processSettore ICAR/03 - Ingegneria Sanitaria-AmbientaleChemistryAcetateSubstrate (chemistry)Pulp and paper industryHD28-70020801 environmental engineeringOrganic fractionWastewaterFermentationFermentationValorisation
researchProduct

Batch Test Evaluation of Four Organic Substrates Suitable for Biological Groundwater Denitrification

2014

Nitrates pollution represents nowadays a serious issue related to the quality of groundwater; continuous growth of industrial-scale agricultures lead to an increase of nitrates content in groundwater in the last years. Several technologies have been validated as capable to promote in situ biological nitrates remediation, such as permeable reactive barriers (PRB), biotrench, biobarriers etc. These technologies are all characterised by the use of organic substrate that act as a slow release carbon source. In free dissolved oxygen absence, such organic carbon is further oxidised, by heterotrophic bacteria naturally present in soil, in compliance to anoxic metabolism by using nitrates bound oxy…

Biological groundwater Denitrificationlcsh:Computer engineering. Computer hardwareSettore ICAR/03 - Ingegneria Sanitaria-AmbientaleOrganic carbon source.lcsh:TP155-156lcsh:TK7885-7895Batch testlcsh:Chemical engineeringChemical Engineering Transactions
researchProduct

Mathematical Modelling of In-sewer Processes as a Tool for Sewer System Design

2018

The objective of this paper is to evaluate the potential impact of in-sewer processes (COD components transformation and hydrogen sulphide production) on the design of sewer systems. The tool used for such analysis is a mathematical model derived from the WATS model (Wastewater Aerobic/anaerobic Transformation in Sewers) able to describe the processes occurring in the sewer system both under aerobic and anaerobic conditions. The model is applied to three synthetic catchments with, respectively, 10,000, 50,000 and 250,000 inhabitants connected to gravity sewer systems different in terms of type (separate or combined), slope, length, travel time, wastewater temperature. The simulation results…

Biological nutrients removaPotential impactSettore ICAR/03 - Ingegneria Sanitaria-AmbientaleSewerEnvironmental engineeringAerobic/anaerobic conditionHydrogen sulphideWastewater transformationTravel timeAerobic/anaerobic conditions Sewer Wastewater transformations Biological nutrients removalWastewaterEnvironmental scienceSystems designSanitary sewer
researchProduct

Biomethane Production from Anaerobic Co-Digestion of Selected Organic Fraction of Municipal Solid Waste (OFMSW) with Sewage Sludge: Effect of the Ino…

2021

The aim of this study was to evaluate the effect of the inoculum to substrate ratio (ISR) and the mixture ratio between organic fraction of municipal solid waste (OFMSW) and sewage sludge (SS) on the methane production potential achievable from anaerobic co-digestion (AcoD). Biochemical Methane Potential (BMP) assays at mesophilic temperature were used to determine the best AcoD configuration for maximizing methane yield and production rate, as well as to address possible synergistic effects. The maximum methane yield was observed at ISR of 1 and 60% OFMSW: 40% SS as co-digestion mixture, whereas the highest methane production rate was achieved at ISR of 2 with the same mixture ratio (207 m…

Bioreactors Digestion Anaerobic co-digestion BMP Methane OFMSW Sewage sludge Synergy Anaerobiosis Sewage Refuse Disposal Solid WasteSettore ICAR/03 - Ingegneria Sanitaria-AmbientaleSewagesewage sludgeHealth Toxicology and MutagenesismethanePublic Health Environmental and Occupational HealthRsynergySolid WasteArticleRefuse Disposalanaerobic co-digestion; BMP; methane; OFMSW; sewage sludge; synergyBioreactorsBMPMedicineDigestionOFMSWAnaerobiosisanaerobic co-digestionInternational Journal of Environmental Research and Public Health
researchProduct

Bioresource technology for bioenergy, bioproductsenvironmental sustainability.

2022

The 3rd International Conference for Bioresource Technology for Bioenergy, Bioproducts & Environmental Sustainability (BIORESTEC) was held online from 17 to 19 May 2021. More than 120 participants from all over the world participated in this conference. The conference was studded with nine plenary lectures, ten invited lectures as well as more than 50 oral presentations along with several poster presentations. The purpose of the conference was to foster the exchange of knowledge and ideas among researchers in academia and industry as well as policymakers working on various aspects of biorefinery to discuss the progress made during the intervening three years and the latest trends in bio…

Bioresource technologyEnvironmental EngineeringSettore ICAR/03 - Ingegneria Sanitaria-AmbientaleRenewable Energy Sustainability and the EnvironmentFungiBioengineeringGeneral MedicineRenewable feed stockBiofuelsLignocellulosic biorefineryHumansBiomassBioprocessesWaste Management and DisposalValue-added productsBiotechnologyBioresource technology
researchProduct

Analisi di processo e dinamica della comunità batterica nel trattamento di sedimenti marini con reattori bioslurry

2020

Nella nota sono riportati i risultati di una sperimentazione condotta mediante la messa in esercizio di un reattore bioslurry per il trattamento di sedimenti marini contaminati da idrocarburi. Sono state valutate le performance di processo in termini di rimozione di TPH (86% con velocità di rimozione massima di 36 mgTPH kg-1 d-1) congiuntamente ad altre tipologie di indagini volte ad ottenere maggiori informazioni sulla natura dei processi che si sono sviluppati nel reattore. Nello specifico, è stato utilizzato un approccio di tipo microbiologico mediante l’adozione di una tecnica di sequenziamento di nuova generazione (NGS - Next Generation Sequencing). Dall’analisi dei dati biologici è st…

BioslurrySettore ICAR/03 - Ingegneria Sanitaria-AmbientaleHydrocarbonMicrobial communityMarine Sediment
researchProduct