Search results for "SCANNER"
showing 10 items of 170 documents
Conversion of nadir, narrowband reflectance in red and near-infrared channels to hemispherical surface albedo
1997
Abstract Measured nadir-viewed narrow-band reflectanees in red and near infrared channels simulating AVHRR Channels 1 and 2 are compared with measured integrated solar spectrum hemispherical albedos. Reflectanees and albedos were measured from an aircraft over four widely different vegetation surfaces in southeastern Tasmania (Australia). A linear function is used to simultaneously correct for narrow band to broad band conversion errors and to convert nadir viewed reflectances to hemispherical albedos. While the application of the conversion equation presented is limited to the vegetation types of the study, the equation is independent of vegetation type. Results indicate that the reflectan…
Full-Waveform Terrestrial Laser Scanning for Extracting a High-Resolution 3D Topographic Model: a Case Study on an Area of Archaeological Significance
2014
AbstractThis paper describes a method, which uses full-waveform terrestrial laser scanning to survey the surface of the slope below the Temple of Juno, located in the Valley of the Temples in Agrigento (Sicily, Southern Italy). The surface is characterized by the presence of large rock blocks, which have fallen down from the upper side; possible further detachments of rock blocks would cause a situation of general instability, with a very high risk to the archaeological structures in the near future. The methodology was designed to evaluate the potential of full-waveform laser scanning technology for the production of a very high resolution 3D topographic model of the slope, to be used as a…
Toward a virtual reconstruction of an antique three-dimensional marble puzzle
2017
International audience; Abstract | Introduction | Related Work | Acquisition Setup, Proposed Prototype: Calibration and Visibility | Preprocessing of Scanned Three-Dimensional Fragment Data | Processing of Scanned Three-Dimensional Surface Data: Matching | Conclusion and Future Works | Appendices | Acknowledgments | ReferencesAbstract. The reconstruction of broken objects is an important field of research for many applications, such as art restoration, surgery, forensics, and solving puzzles. In archaeology, the reconstruction of broken artifacts is a very time-consuming task due to the handling of fractured objects, which are generally fragile. However, it can now be supported by three-dim…
Preprocessing of region of interest localization based on local surface curvature analysis for three-dimensional reconstruction with multiresolution
2009
We present an approach to integrate a preprocessing step of the region of interest ROI localization into 3-D scanners laser or ste- reoscopic. The definite objective is to make the 3-D scanner intelligent enough to localize rapidly in the scene, during the preprocessing phase, the regions with high surface curvature, so that precise scanning will be done only in these regions instead of in the whole scene. In this way, the scanning time can be largely reduced, and the results contain only per- tinent data. To test its feasibility and efficiency, we simulated the prepro- cessing process under an active stereoscopic system composed of two cameras and a video projector. The ROI localization is…
3D Displacements and Strains Solid Measurement based on the Surface Texture with a Scanner Laser
2013
International audience; The developments of non-contact measurement are today widely due to the unprecedented progress of optronic. The applications of these techniques are wide and varied for the 3D measurement of industrial products. In addition to the forms and dimensions, we show in this paper that the devices of laser scanning permit to measure displacements and deformations. In this case, it is necessary to follow a solid particle in its motion. It is then necessary to identify the particle between two configurations of the body before and after displacement. The method of greyscale patterns, obtained by applying a spray, is generally used. The originality of the proposed method is ba…
Strain fields measurement of non-rigid solid by scanning laser coupled with camera
2013
International audience; Abstract. Today, the techniques of measurement without contact by scanning laser are increasingly used. These techniques allow to measure 3D objects without contact and the measurement rates can reach few thousand points by second that is very adapted to complex shapes. To measure displacements and deformations, it is necessary to follow a solid particle in its motion between two configurations of the body before and after displacement. The method of stereovision based on grayscale patterns, obtained by applying a spray, is generally used. The results are obtained by two correlations: spatial and temporal correlations. An alternative method consists to use a scanner …
Digital Correlation Method Based on Microgeometrical Texture Patterns for Strain Fields Measurements
2005
International audience; Digital correlation method is widely used in experimental mechanics to obtain the deformation field. Currently this method is applied with digital images of the initial and deformed surface sprayed with black or white painting. Speckle patterns are then captured and the correlation can be made with high 0.01 pixel accuracy in 2D-cases. In three-dimensions, the stereo-correlation can be used with a lower accuracy. The work presented in this paper, is a first approach based on the use of a 3D laser scanner in the objective of three-dimensional strain field measurement. The digital speckle patterns are not given by gray level but from the micro-geometrical surface textu…
Comparaison de deux méthodes de correction atmosphérique des données thermiques de Landsat TM
1996
The high resolution of Landsat Thematic Mapper (TM) thermal infrared data can be interesting in applications such as energy balance and crop water stress studies. However, surface temperature measurements are strongly affected by atmospheric effects, particularly by water vapour absorption, therefore a correction method is absolutely necessary. The impossibility of applying a split-window equation and the difficulty of having temporarily coincident radiosondes produce a slight use of Landsat TM data to obtain surface temperature. Vidal et al. show that in a zone with homogeneous climatic conditions, atmospheric correction can be evaluated by using energy balance equation and standard meteor…
A 3D multispectral integrated acquisition system : acquisition, data coding and compression
2010
We have developed an integrated system permitting the simultaneous acquisition of the 3D shape and the spectral spectral reflectance of scanned object surfaces. We call this system a 3D multispectral scanner because it combines within a stereopair, a multispectral video camera and a structured light projector. We see several application possibilities for a such acquisition system but we want to highlight applications in the field of digital archiving and broadcasting for heritage objects. In the manuscript we first introduce the acquisition system and its necessary calibrations and treatments needed for his use. Then, once the acquisition system is functional, data that are generated are ri…
Şeffaf cisimlerim 3B taranması
2010
Many practical tasks in industry, such as automatic inspection or robot vision, often require scanning of three-dimensional shapes with non-contact techniques. However, transparent objects, such as those made of glass, still pose difficulties for classical scanning techniques. The reconstruction of surface geometry for transparent objects is complicated by the fact that light is transmitted through, refracted and in some cases reflected by the surface. Current approaches can only deal relatively well with sub-classes of objects. The algorithms are still very specific and not generally applicable. Furthermore, many techniques require considerable acquisition effort and careful calibration. T…