Search results for "SCOPE"
showing 10 items of 2420 documents
Sintering of Fe2NiO4 with an internal binder: a way to obtain a very dense material
2003
Abstract The coupled synthesis and sintering of Fe2NiO4 can be carried out from the calcination under air at high temperatures (>1200 °C) of precompacted (under 12 MPa) pellets of different mixtures: NiO/α-Fe2O3; NiO/α-Fe2O3/Fe; NiO/α-Fe2O3/Ni. The densest material is obtained at 1200 °C only from the following mixture: NiO (40 mol%), α-Fe2O3 (50 mol%) and Ni (10 mol%). Because the metallic nickel is very ductile, it is used as an internal binder in order to enhance the precompacting of the samples. Moreover, the role of nickel is to enhance the sintering reaction. This route leads to a final material of relative density close to 98±2%.
A new method of nanocrystalline nickel powder formation by magnetron sputtering on the water-soluble substrates
2018
Due to the accurate and relatively easy control magnetron sputtering is an attractive technique for the synthesis of metallic particles. This work describes a new method of nickel powder production by depositing nickel on the surface of sodium chloride particles which were used as the template and are soluble in water. Ni powder with flake-like structure was obtained after washing Ni coated salt particles in ultrasonic cleaner. Salt particles and nickel powder were characterized using scanning electron microscope (SEM), energy-dispersive x-ray spectrometer, XRD and X-ray photoelectron spectroscopy (XPS) techniques. SEM images showed that thickness of the received Ni particles varied in the …
Surface reconstruction of the lamellar morphology in a symmetric poly(styrene-block-butadiene-block-methyl methacrylate) triblock copolymer: A tappin…
1996
The surface morphology of a symmetric poly(styrene-block-butadiene-block-methyl methacrylate) triblock copolymer (PS-b-PB-b-PMMA) with 6 wt % PB has been investigated by tapping mode scanning force microscopy (SFM). The results are compared to the bulk morphology as determined by transmission electron microscopy (TEM). In solvent-cast films PS/PMMA lamellae are formed, which are oriented nearly perpendicular to the free surface. Like in the bulk, also at the free film surface polybutadiene spheres are located at the lamellar PS/PMMA interface. However, contrary to the bulk, the surface morphology includes a large number of defects such as curved lamellar and disclinations, and the lamellar …
Analysis of pectin biopolymer phase states using acoustic emissions.
2019
Acoustic emissions are stress or elastic waves produced by a material under external load. Since acoustic emissions are generated from within and transmitted through the substance, the acoustic signature provides insights into the physical and mechanical properties of the material. In this report, we used a constant velocity probe with force and acoustic emission monitoring to investigate the properties of glass phase and gel phase pectin films. In the gel phase films, a constant velocity uniaxial load produced periodic premonitory acoustic emissions with coincident force variations (saw-tooth pattern). SEM images of the gel phase microarchitecture indicated the presence of slip planes. In …
An Innovative Treatment Based on Sodium Citrate for Improving the Mechanical Performances of Flax Fiber Reinforced Composites
2021
The goal of this paper is to evaluate the effectiveness of a cost-effective and eco-friendly treatment based on the use of sodium citrate (Na3C6H5O7) on the mechanical properties of flax fiber reinforced composites. To this scope, flax fibers were soaked in mildly alkaline solutions of the sodium salt at different weight concentration (i.e., 5%, 10% and 20%) for 120 h at 25 °C. The modifications on fibers surface induced by the proposed treatment were evaluated through Fourier transform infrared analysis (FTIR), whereas scanning electron microscope (SEM) and helium pycnometer were used to obtain useful information about composites morphology. The effect of the concentration of the treating …
Accelerated laboratory weathering of polypropylene composites filled with synthetic silicon-based compounds
2019
Abstract Non-functionalized and n-alkyl functionalized polyhedral oligomeric silsesquioxanes (POSS), siloxane-silsesquioxane resins and the sol-gel silicas were for the first time examined as possible UV-stabilizers and/or antioxidants in polypropylene (PP). The obtained composites were subjected to the accelerated laboratory weathering tests. The influence of the weathering conditions on the structure and properties of the PP materials was evaluated on the basis of the results from Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and differential scanning calorimetry (DSC) studies. It was found that weathering resistance of the PP materials was strongly de…
On the formation of lamellae during annealing of extended chain crystals of radiation-polymerized trioxane
1969
Abstract The structure changes of radiation-polymerized trioxane taking place during annealing have been studied by means of electron microscopy, X-ray small- and wide-angle scattering, and differential thermal analysis. The original fibrillar crystals, supposedly consisting of extended chains, change into lamellar crystals due to annealing at temperatures between 150° and 190°C. Lamella formation can be connected with the appearance of a long period of about 200A which is not observed in the unannealed sample. During annealing within the same temperature range the X-ray reflections due to the twin structure of the original polytrioxane disappear, whereas the orientation of the fraction wit…
In vitrouptake of lysozyme-loaded liposomes coated with chitosan biopolymer as model immunoadjuvants
2009
Chitosan binds to negatively charged soy lecithin liposomes by an electrostatic interaction driven by its cationic amino group. This interaction allows developing stable coated vesicles suitable as a targeted carrier and controlled release system for drugs and vaccines. In this work, we studied the effect of chitosan-coated liposomes on the uptake and antigen presentation of hen egg-white lysozyme (HEL) in Peyer's patches peritoneal macrophages isolated from mice. Chitosan-coated liposomes were characterized according to size, zeta potential, and antigen-loading and release properties. Results showed an increase in the positive net charge and size of the liposomes as the concentration of ch…
A Raman spectroscopy study of the oxidation processes in synthetic chromite FeCr2O4
2020
Abstract A crystal of synthetic chromite FeCr2O4 has been annealed in air at 700 °C for 50 days at room pressure in order to study physical-chemical changes. After the annealing treatment, Scanning Electron Microscopy (SEM) images of the polished surface of the sample showed areas of different composition. Detailed Raman mapping revealed that the annealed chromite undergoes an oxidation process, proceeding inwards from the outer surface and leading to the transformation of chromite to magnetite, and ultimately to hematite. The oxidation process also leads to the formation of trellis-like lines, arguably via stress-related mechanisms associated with the phase transformation and consequent vo…
Double Step Electrochemical Process for the Deposition of Superhydrophobic Coatings for Enhanced Corrosion Resistance
2021
Superhydrophobic surface on anodized AA5083 sample was obtained by an electrochemical process. Scanning Electron Microscopy and Fourier Transform Infrared Spectroscopy analyses revealed the hierarchical structure of the coating and the presence of manganese stearate. These features were crucial for the coating superhydrophobicity, demonstrated by a measured contact angle of ~ 163° and its self-cleaning ability. Electrochemical characterization in an aqueous solution mimicking seawater proved an enhanced corrosion resistance due to the superhydrophobic coating with respect to anodized AA5083 sample that also lasted after 20 immersion days in Cl- containing electrolyte.