Search results for "SCOPE"
showing 10 items of 2420 documents
The Nucleating Effect of a Semiflexible Liquid-Crystalline Polymer for the Crystallization of Poly(Phenylene Sulfide)
1995
Abstract Blends of poly(phenylene sulfide) and a semiflexible liquid-crystalline polymer have been prepared, in the whole range of concentration, by melt mixing. The effect of the LCP phase on the crystallization of PPS has been studied by non-isothermal and isothermal calorimetry. It has been found that the addition of only 2-5% LCP into PPS strongly increases the crystallization rate of the latter polymer. This effect has been interpreted as the result of an increased nucleation density. The morphology of the blends, studied by scanning electron microscopy, has shown that the two polymers are incompatible, although the phase dispersion is good. Under elongational flow, the dispersed phase…
Deposition and production of highly reproducible hybrid Cu[(tBu)4Pc]-polystyrene thin layers via spin casting
2012
This study focuses on the determination of a protocol for the production of a hybrid material composed of a polymer and a macrocyclic complex, namely polystyrene and a tetra-tert-butyl-copper phthalocyanine (Cu[(tBu)4Pc]), in order to obtain a layer thickness of about 100 nm and a controlled porosity in a highly reproducible way. Several methods were implemented and their reproducibility was evaluated through elements of characterization such as optical microscopy, atomic force microscopy and scanning electron microscopy. POLYM. ENG. SCI. 2013. © 2012 Society of Plastics Engineers
Evaluation of interfacial shear strength by tensile tests of impregnated flax fiber yarns
2011
Adhesion of flax fibers and polymer matrix as well as mutual bonding of elementary fibers in a technical fiber are among the principal factors governing the mechanical response of flax fiber-reinforced polymer–matrix composites. A method for evaluation of adhesion is proposed based on tension tests of impregnated fiber yarns, with subsequent characterization by optical microscopy of length distribution of fibers pulled out of the yarn fracture surfaces. An elementary probabilistic model is derived relating aspect ratio distribution of the pulled-out fibers to the fiber tensile strength distribution and the effective interfacial shear strength (IFSS). The method was applied to flax fiber/vi…
Use of transmission electron microscopy to obtain quantitative information about polymers
2005
In the polymer field the electron microscope is frequently used as a tool for obtaining purely qualitative data, but only rarely to obtain quantitative information. In order to discuss the potential of this instrument for the latter purpose it is convenient to separate the discussion into the following sub-sections.
Die Bestimmung der Molekulargewichtsverteilung von nichtkristallisierenden Polymeren mit dem Elektronenmikroskop, 6. Fehlerkorrektur der experimentel…
1977
A mathematical treatment is described, by means of which the effect of the measuring errors on the number molecular weight distribution of polymers, as obtained with an electron microscope (EM), can be eliminated. It is shown, that the difference in the nonuniformities of the measured and the corrected distribution would be negligible only in the case of samples with high average degrees of polymerization and sufficiently broad distributions. Otherwise differences of 10% or more can be found, depending on the size of the actual measuring error. This is shown by means of four practical examples. For a practical application the measuring error may not exceed some critical value, which, though…
<title>Holographic recording in polymer composites of organic photochromes and chalcogenides</title>
2008
Recently a number of organic and inorganic materials have been studied for direct surface-relief formation during the exposure process by a light or e-beam. It is very promising for practical application enabling the possibility to simplify the surface-relief formation technology. In this report the method of preparation of thin polymer-chalcogenide and polymer-azobenzene composite films is described, and some features of photoinduced changes of optical properties and holographic recording of these materials are studied. Films of composites were obtained from solution of arsenic sulphide, Disperse red 1 and polymers in organic solvents. The solution was spread on glass substrate and dried. …
Tuning of biodegradation rate of PLLA scaffolds via blending with PLA
2009
Blends of Poly-L-Lactic Acid (PLLA) with Poly-Lactic Acid (PLA) in different proportions (95/5, 90/10, 80/20, 70/30 and 60/40) were utilized in order to realize biodegradable and biocompatible scaffolds for soft tissue engineering applications. The scaffolds were produced via thermally induced phase separation (TIPS) starting from ternary systems where dioxane was the solvent and water the non-solvent. Morphology was evaluated by Scanning Electron Microscopy (average pore size and interconnection). Foams’ apparent density was also evaluated (porosity ranges from 87% to 92%). Moreover an in vitro biodegradation test of scaffolds was set-up in order to verify the rate of degradation of the va…
Polymeric gegenions induced variability and mobility of amphiphilic supramolecular structures on solid substrates
1992
Abstract The micromorphological variations of amphiphilic L -glutamate derivatives at air-substrate interfaces due to an adjacent mobile polymer matrix have been investigated via fluorescence microscopy. Adjusted monolayers of the L -glutamate derivatives have been transferred by LB technique out of different aggregation states onto various substrates. The substrates have been prepared by successive polymer preadsorption to the solid support. The influence of the adjacent polymer layers on the domain morphology as a function of water content and temperature has been examined intensively. Moreover, reversible domain changes induced by temperature variation of the transferred films have been …
Biopolymer based nanocomposites reinforced with graphene nanoplatelets
2016
In this work, biopolymer based nanocomposites filled with graphene nanoplatelets (GnP) were prepared by melt compounding in a batch mixer. The polymer used as matrix was a commercial biodegradable polymer-blend of PLA and a copolyester (BioFlex®). The prepared materials were characterized by scanning electron microscopy (SEM), rheological and mechanical measurements. Moreover, the effect of the GnP amount on the investigated properties was evaluated. The results indicated that the incorporation of GnP increased the stiffness of the biopolymeric matrix.
Structure and elastic properties of smectic liquid crystalline elastomer films
2001
Mechanical measurements, x-ray investigations, and optical microscopy are employed to characterize the interplay of chemical composition, network topology, and elastic response of smectic liquid crystalline elastomers (LCEs) in various mesophases. Macroscopically ordered elastomer films of submicrometer thicknesses were prepared by cross linking freely suspended smectic polymer films. The cross-linked material preserves the mesomorphism and phase transitions of the precursor polymer. The elastic response of the smectic LCE is entropic, and the corresponding elastic moduli are of the order of MPa. In the tilted ferroelectric smectic-C* phase, the network structure plays an important role. Du…