Search results for "SITES"

An investigation of the influence of the macroscopic heterogeneity on the thermoelstic response of fibre reinforced plastics

2005

In this work the influence of the inherent heterogeneity in fibre reinforced plastic composites on the qualitative and quantitative evaluation of the thermoelastic signal is discussed. The role of two different levels of heterogeneity is identified, distinguishing between a micro-geometric scale characterized by the presence of different constituent materials, and a macro-geometric scale characterized by a non-uniform distribution of these constituents. Attention has been focused on the macro-scale level, presenting results of experiments performed on glass fibre - polyester resin samples, intended to highlight the influence on the thermoelastic signal of the fabric texture pattern and the …

Polyethylene/clay nanocomposites with or without compatibilizer: effect of extensional flow

2009

Polymer based nanocomposites for novel generation greener material

2012

Multi-functional hindered amine light stabilizers-functionalized carbon nanotubes for advanced ultra-high molecular weight Polyethylene-based nanocom…

2015

Hindered Amine Light Stabilizer (HAS) molecules have been covalently linked on the outer surface of multi-walled carbon nanotubes (CNTs), and the so-obtained multi-functional fillers (HAS-f-CNTs) have been compounded with Ultra High Molecular Weight Polyethylene (UHMWPE) to get composite films. The success of the grafting reaction of the HAS molecules has been confirmed through spectroscopic and thermo-gravimetric analyses. Morphological analyses reveal a segregated microstructure, in which CNT-rich channels surround the polymer domains. This morphology results in improved mechanical properties and appreciable electrical conductive features. More importantly, the addition of only 1 wt.% of …

Effect of moisture on elastic and viscoelastic properties of epoxy and epoxy-based carbon fibre reinforced plastic filled with multiwall carbon nanot…

2016

Abstract In this study, we investigated the peculiarities of moisture absorption and moisture-induced effects on the elastic and viscoelastic flexural properties of epoxy resin and carbon fibre reinforced plastic (CFRP) filled with multiwall carbon nanotubes (MWCNTs). Short-term cyclic creep-recovery tests of moistened epoxy and CFRP filled with MWCNTs revealed improvements in creep resistance for both materials. The addition of MWCNTs to the epoxy resin suppressed the moisture absorption by the material, causing a reduction in the diffusion coefficient by 31% and equilibrium moisture content by 15%. The addition of MWCNTs reduced the flexural strength of moistened epoxy and CFRP samples by…

Effect of external basalt layers on durability behaviour of flax reinforced composites

2016

Abstract Aim of this work is to evaluate the influence of external layers of basalt-mat on the durability behaviour of flax reinforced epoxy composites. To this scope, long-term ageing tests were performed on two different laminates in critical environmental conditions. The first laminate, named Flax, was constituted by stacking ten layers of bidirectional flax fabrics. The second one, named Flax–Basalt, was produced by replacing two external flax layers with two layers of basalt mat for each side of the laminate. Both laminates were exposed to salt-fog environmental conditions, according to ASTM B 117 standard, for 60 days. Five samples per laminate were removed from salt-fog spray chamber…

Damage accumulation in a carbon/epoxy composite : Comparison between a multiscale model and computed tomography experimental results

2012

International audience; High-resolution computed tomography has been carried out for carbon/epoxy laminates loaded in situ to failure. The experimental data allows major damage mechanisms to be quantified in 3D, in an unambiguous and mechanically representative way, where previous experimental analysis is limited. A multi-scale model that predicts damage accumulation in tensile loaded composites is compared to the experimental analysis, to validate the underpinning assumptions within the model and overall performance. The model considers the random nature of fibre-strengths, stress transfer resulting from fibre breaks, fibre/matrix debonding and viscosity of the matrix. Assumptions within t…

Advanced piezoresistive sensor achieved by amphiphilic nanointerfaces of graphene oxide and biodegradable polymer blends

2018

This work focuses on the preparation of a piezoresistive sensor device, by exploiting an amphiphilic sample of graphene oxide (GO) as a compatibilizer for poly (lactic acid) (PLA)-Poly (ethylene-glycol) (PEG) blends. The presence of GO determined a high stiffening and strengthening effect, without affecting toughness, and allowed a good stability of mechanical properties up to 40 days. Moreover, GO endowed the materials with electrical properties highly sensitive to pressure and strain variations: the biodegradable pressure sensor showed a responsivity of 35 μA/MPa from 0.6 to 8.5 MPa, a responsivity around 19 μA/MPa from 8.5 to 25 MPa. For lower pressure values (around 0.16–0.45 MPa), inst…

A simple method to interpret the rheological behaviour of intercalated polymer nanocomposites

2016

Abstract Nanocomposites are a new class of polymer composites that exhibit an interesting combination of chemical, physical, thermal and mechanical properties. Only small amounts of nanofiller are sufficient to generate great variations of many properties. This work focuses on the rheological behaviour of the intercalated polymer nanocomposites in shear flow. The increase of the viscosity and the more pronounced non-Newtonian behaviour is interpreted simply considering the increase of volume of the inert phase caused by the intercalation of the macromolecules. Indeed, the volume of the intercalated tactoids increases with increasing the interlayer distance. On the other hand, the interlayer…

DEGRADATION OF MATER-BI /WOOD FLOUR BIOCOMPOSITES IN ACTIVE SEWAGE SLUDGE

2009

The mechanical properties of Mater-Bi® are, in general, not adequate for certain applications and the addition of a filler is therefore necessary. Among the different fillers, natural fibres are particularly interesting because they potentially allow improving the performance of the material without compromising its biodegradability. In order to improve the basic mechanical properties of a Mater-Bi grade and to obtain a new, fully biodegradable material, wood flour based composites were prepared by different processing methods. To simulate actual and not laboratory bacterial attack on the prepared materials, in this work we studied the biodegradation of the composites in a real active sewag…