Search results for "SME."
showing 10 items of 10794 documents
Impact Analysis Using Life Cycle Assessment of Asphalt Production from Primary Data
2020
Road construction and maintenance have a great impact on the environment, owing to the huge volumes of resources involved. Consequently, current production procedures and technologies must be properly investigated, for identifying and quantifying the life cycle environmental impacts produced. In this paper, primary data, i.e., site-specific data directly collected or measured on a reference plant, are analyzed for calculating the impact of the production of a hot mix asphalt. The analysis is performed in a from &ldquo
Combined gasification-oxidation system for waste treatment with supercritical water: Lca and performance analysis
2020
In this study the environmental performance of a first-of-its-kind integrated process based on supercritical water gasification and oxidation (SCW-GcO), was evaluated using life cycle assessment (LCA). The process was applied to the treatment of carbon black and used oil as model wastes. Mass and energy balances were performed using Aspen Plus, and the environmental assessment was carried out through SimaPro. A “from cradle to grave” approach was chosen for the analysis, considering impact categories such as climate change, ozone depletion, human toxicity, particulate matter, land use, resource depletion, and other relevant indicators. The environmental profile of the SCW-GcO process was co…
“Natural wine” consumers and interest in label information: An analysis of willingness to pay in a new Italian wine market segment
2019
Abstract Increasing public attention to issues of health and environmental sustainability has contributed to a growing consumer demand for “natural” food and drinks. As has been observed, this trend has also affected the wine market, leading to the spread of so-called “natural wine”. According to the literature, consumers who are aware of the social and environmental impact of their consumption choices pay more attention to the information displayed on the label as a tool to reduce the risk associated with their purchase. This study seeks to identify which consumers are willing to pay for natural wine and to understand what information on the label influences their choice. This study is one…
Evaluating the material resource efficiency of secondary aluminium production: A Monte Carlo-based decision-support tool
2019
The contamination of aluminium streams during the different life cycle stages by alloy mixing and/or accumulation of foreign elements, in combination with the limited melt purification options during remelting, represents an important limiting factor in recycling. Consequently, in secondary aluminium production, primary aluminium is used to dilute the concentration of the residual elements, and alloying elements are added to adjust the composition to the target alloy specifications. However, adding elements, for which their refinement in a subsequent recycling step is problematic, results in permanent down-cycling or ‘quality losses’. Hence, it is crucial to more efficiently control the com…
Modeling the natural gas supply chain for sustainable growth policy
2020
Abstract Natural gas has been used globally as a transitional fuel for supporting a green-energy-supply strategy, which has been questioned for the intermittence and lack of reliability of renewables. This paper proposes a System Dynamics model for assessing alternative security of supply policy along the natural gas value chain. The model incorporates demand, transport, production and reserves of natural gas variables according to a systemic perspective. It also includes a module for evaluating the effect of natural gas price on the demand and supply levels, respectively. Alternative supply policies are evaluated under different scenarios. The chosen case-study focuses on the Colombian nat…
Experimental Investigation into the Effect of Pyrolysis on Chemical Forms of Heavy Metals in Sewage Sludge Biochar (SSB), with Brief Ecological Risk …
2021
Experimental investigations were carried out to study the effect of pyrolysis temperature on the characteristics, structure and total heavy metal contents of sewage sludge biochar (SSB). The changes in chemical forms of the heavy metals (Zn, Cu, Cr, Ni, Pb and Cd) caused by pyrolysis were analyzed, and the potential ecological risk of heavy metals in biochar (SSB) was evaluated. The conversion of sewage sludge into biochar by pyrolysis reduced the H/C and O/C ratios considerably, resulting in stronger carbonization and a higher degree of aromatic condensation in biochar. Measurement results showed that the pH and specific surface area of biochar increased as the pyrolysis temperature increa…
Smart Urban Energy Districts and Energy Policies
2018
The deployment of smart cities appears a strategic factor for reducing environmental impact and increasing competitivity of economic systems across the world. Although terminology is similar worldwide, the different political assets and social enviroments largely affect the development models. Drivers indeed are quite different, such as the speed at which transformations take place. As a result, implementation of measures is carried out differently and realizations of smart city projects can be strongly different. Europe, China and U.S.A. approaches are compared in this paper to provide the reader with a broader view about different smart city implementations, with a focus on the electricit…
To incinerate or not? - Effects of incineration on the concentrations of heavy metals and leaching efficiency of post-precipitated sewage sludge (RAV…
2020
The major element and heavy metal concentrations of post-precipitated sewage sludge (PPS) and its ash residue (PPA) were determined using microwave digestion followed by inductively coupled plasma optical emission spectrometry (ICP-OES) and mass spectrometry (ICP-MS). To the best of our knowledge, this has not been previously done. In both PPS and PPA the heavy metal concentrations were clearly below the average concentrations than those encountered in sewage sludge in Europe. The leaching efficiency of the metal (Al/ Fe) used as a precipitation agent from post-precipitated sludge and its ash residue with phosphoric acid was also investigated with previously optimized leaching conditions. T…
Analysis of Electrical Energy Demands in Friction Stir Welding of Aluminum Alloys
2017
Abstract Manufacturing processes, as used for discrete part manufacturing, are responsible for a substantial part of the environmental impact of products. Despite that, most of metalworking processes are still poorly documented in terms of environmental footprint. To be more specific, the scientific research has well covered conventional machining processes, concerning the other processes there is a lack of knowledge in terms of environmental load characterization instead. The present paper aims to contribute to fill this knowledge gap and an energetic analysis of Friction Stir welding (FSW) is presented. Following the CO2PE! methodological approach, power studies and a preliminary time stu…
Quality Assessment of Reconstruction and Relighting from RTI Images: Application to Manufactured Surfaces
2019
In this paper, we propose to evaluate the quality of the reconstruction and relighting from images acquired by a Reflectance Transformation Imaging (RTI) device. Three relighting models, namely the PTM, HSH and DMD, are evaluated using PSNR and SSIM. A visual assessment of how the reconstructed surfaces are perceived is also carried out through a sensory experiment. This study allows to estimate the relevance of these models to reproduce the appearance of the manufactured surfaces. It also shows that DMD reproduces the most accurate reconstruction/relighting to an acquired measurement and that a higher sampling density don't mean necessarily a higher perceptual quality.