Search results for "SOLIDS"
showing 10 items of 159 documents
CFD simulations of dense solid–liquid suspensions in baffled stirred tanks: Prediction of the minimum impeller speed for complete suspension
2012
Abstract In the literature on mechanically agitated solid–liquid systems, several methods are described to estimate the minimum impeller speed Njs at which all particles are suspended, but few studies have been devoted so far to their critical comparative assessment [67] . In the present paper, several alternative Njs prediction methods are applied to CFD results obtained for selected test cases covering a broad range of suspension conditions and impeller speeds. Results are compared with one another and with classic empirical correlations [88] . The aim of the work is to assess the adequacy of different methods for predicting Njs and, more generally, to contribute to a viable CFD-based str…
uality Evaluation of “Tardivo di Ciaculli” Mandarins in Post-Harvest Processing on an Industrial Scale Using a Portable Vis/NIR Device
2016
Abstract. Vis/NIR technology is widely used today to quickly and non-destructively evaluate fruit and vegetable qualities, and many applications have been found since the 1990s. However, no industrial-scale applications can further consolidate the use of non-destructive techniques in post-harvest processing. This study aims to test the possibility of applying vis/NIR technology in a modern citrus-processing plant to assess the damage that the fruits eventually suffer when they are processed on an industrial scale and the evolution of their key quality parameters in a period of 10 days after harvest. The spectral acquisitions were performed using a portable vis/NIR device, which operated in …
Al-27 and Si-29 Solid-State NMR Characterization of Calcium-Aluminosilicate-Hydrate
2012
International audience; Calcium silicate hydrate (C-S-H) is the main constituent of hydrated cement paste and determines its cohesive properties. Because of the environmental impact of cement industry, it is more and more common to replace a part of the clinker in cement by secondary cementitious materials (SCMs). These SCMs are generally alumina-rich and as a consequence some aluminum is incorporated into the C-S-H. This may have consequences on the cohesion and durability of the material, and it is thus of importance to know the amount and the location of Al in C-S-H and what the parameters are that control these features. The present paper reports the Si-29 and Al-27 MAS NMR analyses of …
Rovibrational spectroscopy of ethylene : Stark effect : Application to ethylene in zeolites
2010
The objective of this report is to present a study as complete as possible of the Stark effect in the asymmetric top molecules of X2Y4 type possessing the D2h symmetry group and to apply it to the problem of the spectroscopy of the ethylene molecule trapped in a zeolite. For the first time, a tensorial formalism adapted to the study of the Stark effect for the O(3) D2h group chain was developed. In parallel, a computer package was worked out as a new generation of software called D2hTDS-ST using a simpler basis, allowing an economy in the calculation time. On the basis of the theoretical and computing tools as well as from the experimental spectra, recorded in the laboratory, we made a firs…
Influence of total solids concentration on membrane permeability in a submerged hollow-fibre anaerobic membrane bioreactor.
2012
The main aim of this work was to study the influence of the mixed liquor total solids (MLTS) concentration on membrane permeability (K 20) in a submerged anaerobic membrane bioreactor (SAnMBR) pilot plant, which is equipped with industrial hollow-fibre membranes and treats urban wastewater. This pilot plant was operated at 33°C and 70 days of SRT. Two different transmembrane fluxes (13.3 and 10 LMH) were tested with a gas sparging intensity of 0.23 Nm 3 m -2 h -1 (measured as Specific Gas Demand referred to membrane area). A linear dependence of K 20 on MLTS concentration was observed within a range of MLTS concentration from 13 to 32 g L -1 and J 20 of 10 LMH. K 20 was maintained at sustai…
Standardization of Methods for Characterizing the Surface Geometry of Solids
2003
Since a comprehensive survey published in 1999 [1] much work was done in standardizing measuring methods to characterize the surface geometry of dispersed and/or porous solids and to certify reference materials. The present paper is an extension of a short communication [2]. It gives a survey on existing standards and reports on new drafts and proposals.
Comparison of laboratory-scale thermophilic biofilm and activated sludge processes integrated with a mesophilic activated sludge process
2003
A combined thermophilic-mesophilic wastewater treatment was studied using a laboratory-scale thermophilic activated sludge process (ASP) followed by mesophilic ASP or a thermophilic suspended carrier biofilm process (SCBP) followed by mesophilic ASP, both systems treating diluted molasses (dilution factor 1:500 corresponding GF/A-filtered COD (COD(filt)) of 1900+/-190 mgl(-1)). With hydraulic retention times (HRTs) of 12-18 h the thermophilic ASP and thermophilic SCBP removed 60+/-13% and 62+/-7% of COD(filt), respectively, with HRT of 8 h the removals were 48+/-1% and 69+/-4%. The sludge volume index (SVI) was notably lower in the thermophilic SCBP (measured from suspended sludge) than in …
Filtration of Nordic recirculating aquaculture system wastewater: Effects on microalgal growth, nutrient removal, and nutritional value
2021
Abstract Microalgal bioremediation of recirculating aquaculture system (RAS) wastewater represents an alternative for wastewater treatment with the potential to generate valuable biomass. This study evaluated the effects of removing biological contamination and suspended solids from Nordic area RAS wastewater through filtration with 0.45 μm filters on the performance and nutritional value of microalgae. All three tested green microalgae (Haematococcus pluvialis, Monoraphidium griffithii, and Selenastrum sp.) were able to grow in raw (unfiltered) and filtered RAS wastewater. Cultivation in raw RAS wastewater decreased the ω-3 and ω-6 fatty acid content of H. pluvialis as compared to filtered…
Characterization of activated sludge settling properties with a sludge collapse-acceleration stage
2019
Abstract The sedimentability of the activated sludge can be affected by the presence of a large variety of coagulants and polymers from a previous physical-chemical process. In this paper, the activated sludge settling process in industrial wastewater treatment plants where the sludge does not settle in a conventional way is studied. The two observed constant hindered settling velocity stages and the instant the intermediate sludge acceleration period occurs are described. A variation of the Richardson and Zaki model is used to characterize the two stages of constant settling velocity. The concentration of suspended solids, where a sudden decrease of hindered settling velocity was observed,…
Water Reuse in the Food Industry: Quality of Original Wastewater Before Treatments
2017
This chapter introduces one of the most important emergencies in the world of food and non-food industries: the availability of clean and drinking water. Water use has more than tripled globally since 1950: water quality and its scarcity are increasingly recognised as one of the most important environmental threats to humankind. In addition, the food and beverage processing industry requires copious amounts of water. For these reasons, direct and indirect water reuse systems are becoming more and more interesting and promising technologies. Different reuse guidelines have been recently issued as the result of risk assessment and management approaches linked to health-based targets. Chemical…