Search results for "SULFURIZATION"

Post-synthesis alumination of MCM-41: Effect of the acidity on the HDS activity of supported Pd catalysts

2010

Abstract Siliceous MCM-41 with different amount of alumina, from 0.25 up to 4.0 wt%, were prepared by impregnation of the MCM-41 with aqueous solution of Al(NO) 3 ·9H 2 O. The modified mesoporous silicas were then used as supports for Pd catalysts prepared by wet-impregnation from PdCl 2 precursor. Supports and corresponding Pd catalysts were characterized by XRD, XPS and NH 3 -TPD. The catalytic behavior was tested in the hydrodesulfurization (HDS) reaction of thiophene. An increase of the hydrodesulfurization activity with increasing alumina amount up to 0.5 wt% was observed. On the basis of the acidity change of the support and the structural modification underwent by the deposited palla…

Hydrodesulfurization cobalt-based catalysts modified by gold

2007

Cobalt catalysts supported on amorphous SiO2 and ordered mesoporous silica (MCM-41) were prepared by incipient wetness impregnation. Gold was added by consecutive impregnation or by co-impregnation. The materials were characterised by XPS, XRD and TPR techniques and evaluated in the hydrodesulfurization (HDS) of thiophene in order to investigate the effect of the noble metal on the structure and on the catalytic behaviour of the supported cobalt. Co/MCM-41 exhibited higher HDS activity and higher stability than the Co/SiO2. Moreover, in contrast to silica case, the gold impregnated MCM-41, produced an enhancement of the cobalt catalytic activity, and this is likely to be related to an incre…

Nature of cobalt active species in hydrodesulfurization catalysis: combined support and preparation method effects

2007

Abstract Co/γ-Al2O3, Co/SiO2, Co/MCM-41, Co/ASA and Co/S2 (amorphous aluminosilicate with Al/Si = 0.13 and with Al/Si ≈ 2, respectively) were prepared by the method of wet impregnation and by the method of precipitation in the presence of sodium carbonate. The samples were characterised by XPS, XRD and TPR. The catalytic activity was tested in the hydrodesulfurization of thiophene using a continuous flow reactor. Among the wet impregnated catalysts those supported on the amorphous and ordered mesoporous silica exhibited higher HDS activity as compared to the alumina containing supports. Particularly, the use of the mesoporous, high surface area MCM-41 support, determined the best performing…

Combined effect of noble metals (Pd, Au) and support properties on HDS activity of Co/SiO2 catalysts

2009

Abstract Cobalt-based catalysts supported on different types of SiO 2 are studied in the hydrodesulfurization of thiophene. Amorphous silica and siliceous MCM-41 and HMS, characterized by different texture and surface acidity are used as carriers. The effects due to the modification of the support by impregnation with palladium precursor and to the co-impregnation of cobalt and gold are considered. The catalysts are characterized by N 2 physisorption (BET), XRD, TPR and XPS techniques. The use as supports of the ordered mesoporous silica with higher surface area with respect to amorphous silica, produces a better dispersion of the cobalt oxides particles. Moreover, the addition of palladium…

How the Combination of Bio-based Polymers and Ionic Liquids in Gel Phases Works for the Desulfurization of Fuels

Bio-based chitosan and cellulose ionic liquid gels: polymeric soft materials for the desulfurization of fuel

2022

Desulfurization of fuel that avoids the introduction in the atmosphere of toxic sulfur volatile compounds, usually formed during combustion, is a viable strategy to reduce pollution. To find new efficient and eco-sustainable adsorbent materials, bio-based polymers such as chitosan (CS), cellulose (CE) and cellulose acetate (CEOAc) were dissolved in ionic liquids (ILs) to form ionic liquid gels (ILGs). Gelling and swelling ability, porosity, morphology, rheology and mechanical response were studied as a function of the polymer and ionic liquid (IL) used. The best performing gels were tested for fuel desulfurization using a fuel mimicking solution of thiophene (T), benzothiophene (BT) and dib…

Wo3 and ionic liquids: A synergic pair for pollutant gas sensing and desulfurization

2020

This review deals with the notable results obtained by the synergy between ionic liquids (ILs) and WO3 in the field of pollutant gas sensing and sulfur removal pretreatment of fuels. Starting from the known characteristics of tungsten trioxide as catalytic material, many authors have proposed the use of ionic liquids in order to both direct WO3 production towards controllable nanostructures (nanorods, nanospheres, etc.) and to modify the metal oxide structure (incorporating ILs) in order to increase the gas adsorption ability and, thus, the catalytic efficiency. Moreover, ionic liquids are able to highly disperse WO3 in composites, thus enhancing the contact surface and the catalytic abilit…

Preparation of tungstophosphoric acid/cerium-doped NH2-UiO-66 Z-scheme photocatalyst: a new candidate for green photo-oxidation of dibenzothiophene a…

2021

International audience; The goal of this study was to introduce an effective visible-light induced photocatalytic system with a good ability for photocatalytic oxidative desulfurization (PODS) and denitrogenation (PODN) using molecular oxygen (O2) as an oxidant. In this regard, tungestophosphoric acid (PW12) was supported onto cerium-doped NH2-UiO-66 (PW12/Ce-NUiO-66) and employed for the photo-oxidation of dibenzothiophene (DBT) and quinoline (Qu). Herein, using cerium (Ce) as a “mediator” facilitated the separation of charge carriers, while NH2-UiO-66 remarkably enhanced the surface area with plentiful adsorption sites and shifted the adsorption edge of PW12to the visible region. The sum …