Search results for "SVI"
showing 10 items of 4456 documents
Fault Detection of Networked Control Systems Based on Sliding Mode Observer
2013
Published version of an article in the journal: Mathematical Problems in Engineering. Also availeble from the publisher at: http://dx.doi.org/10.1155/2013/506217 Open Access This paper is concerned with the network-based fault detection problem for a class of nonlinear discrete-time networked control systems with multiple communication delays and bounded disturbances. First, a sliding mode based nonlinear discrete observer is proposed. Then the sufficient conditions of sliding motion asymptotical stability are derived by means of the linear matrix inequality (LMI) approach on a designed surface. Then a discrete-time sliding-mode fault observer is designed that is capable of guaranteeing the…
CFD simulation of channels for direct and reverse electrodialysis
2012
Flows within very thin channels, typically filled with spacers, can be often encountered in many processes such as electrodialysis (ED) and reverse electrodialysis (RED). Although the ED and the RED processes have been studied for a long time, the optimization of the fluid dynamics within the channels is still an open problem. In the present work, realized within the EU-FP7 funded REAPower project, computational fluid dynamics simulations were carried out in order to predict the fluid flow field inside a single ED/RED channel. Some different configurations were tested which includes: an empty channel, a channel provided with a spacer, and a channel filled with a purposely manufactured fiber…
Analysis and simulation of scale-up potentials in reverse electrodialysis
2015
The Reverse Electrodialysis (RED) process has been widely accepted as a viable and promising technology to produce electric energy from salinity difference (salinity gradient power - e.g. using river water/seawater, or seawater and concentrated brines). Recent R&D efforts demonstrated how an appropriate design of the RED unit and a suitable selection of process conditions may crucially enhance the process performance. With this regard, a process simulator was developed and validated with experimental data collected on a lab-scale unit, providing a new modelling tool for process optimisation. In this work, performed within the REAPower project (www.reapower.eu), a process simulator previousl…
Type-2 fuzzy control of a fed-batch fermentation reactor
2010
Abstract The aim of the paper is to present the application of type-2 fuzzy logic controllers (T2FLCs) to the control of a fed-batch fermentation reactor in which the penicillin production is carried out. The performance of the control system using T2FLCs is compared by simulation with that of a control system using type-1 fuzzy logic controllers (T1FLCs). The non linear model used for the simulation study is an unstructured model characterized by the presence of non linearities, parameter uncertainty and measurement noise. Simulation results confirm the robustness of the T2FLC which shows a better performance than its type-1 counterpart particularly when uncertainties are present in the co…
Simulation of stability and dynamics of multistage flash desalination
2011
gPROMS software was used to study the dynamics of a multistage flash desalination brine circulation system (MSF-BR) as a function of major operating parameters. Most of the previous studies focused on MSF-BR dynamic model development however; it gave very little information on dynamic response of the system to the most significant process independent parameters. The present model was first validated against available industrial data of different plants. System dynamics were obtained upon increasing/decreasing several of the operating parameters over a range of ± 15%. Results show that increase/decrease of the cooling seawater flow rate have limited effect on the system dynamics. Increasing/…
On the assessment of power consumption and critical impeller speed in vortexing unbaffled stirred tanks
2017
Abstract Unbaffled stirred tanks are increasingly recognized as a viable alternative to common baffled tanks for a number of processes and bio-processes where the presence of baffles is undesirable. Notwithstanding the increasing industrial interest towards unbaffled tanks, available experimental information on their behaviour is still very poor, even for important parameters such as mechanical power drawn and critical impeller speed (Ncr) at which the transition between non-aerated (sub-critical regime) and aerated (super-critical regime) conditions occurs. In this work the influence of Reynolds and Froude numbers on power consumption characteristics of unbaffled stirred tanks is presented…
A simulation tool for analysis and design of reverse electrodialysis using concentrated brines
2015
Abstract Reverse electrodialysis (SGP-RE or RED) represents a viable technology for the conversion of the salinity gradient power into electric power. A comprehensive model is proposed for the RED process using sea or brackish water and concentrated brine as feed solutions. The goals were (i) reliably describing the physical phenomena involved in the process and (ii) providing information for optimal equipment design. For such purposes, the model has been developed at two different scales of description: a lower scale for the repeating unit of the system (cell pair), and a higher scale for the entire equipment (stack). The model was implemented in a process simulator, validated against orig…
A neural network-based optimizing control system for a seawater-desalination solar-powered membrane distillation unit
2013
Abstract Several schemes have been proposed so far for coupling desalination processes with the use of renewable energy. One of their main drawbacks, however, is the nature of the energy source that requires a discontinuous and non-stationary operation, with some control and optimization problems. In the present work, a solar powered membrane distillation system has been used for developing an optimizing control strategy. A neural network (NN) model of the system has been trained and tested using experimental data purposely collected. Afterwards, the NN model has been used for the analysis of the process performance under various operating conditions, namely distillate production versus fee…
Prediction of flow fields in a dual-impeller stirred vessel
1999
Numerical simulations were connected for the flow field in a baffled tank stirred by a dual Rushton impeller. For this geometry, LDV measurements show a characteristic dependence of the flow patterns upon the position of the impellers. Two advanced modeling approaches were tested. In the first, the vessel was divided info two concentric blocks, coupled by, a sliding grin technique, and simulations were conducted in time-dependent mode. In the second approach, the vessel was modeled as two partially over-lapping I regions, the inner one rotating with the impeller and rite outer one stationary simulations were run in steady-state mode for each of the two regions, while information was iterati…
Coupling CFD with a one-dimensional model to predict the performance of reverse electrodialysis stacks
2017
Abstract Different computer-based simulation models, able to predict the performance of Reverse ElectroDialysis (RED) systems, are currently used to investigate the potentials of alternative designs, to orient experimental activities and to design/optimize prototypes. The simulation approach described here combines a one-dimensional modelling of a RED stack with a fully three-dimensional finite volume modelling of the electrolyte channels, either planar or equipped with different spacers or profiled membranes. An advanced three-dimensional code was used to provide correlations for the friction coefficient (based on 3-D solutions of the continuity and Navier-Stokes equations) and the Sherwoo…