Search results for "Scanning"

Cure kinetics of a cobalt catalysed dicyanate ester monomer in air and argon atmospheres from DSC data

2004

A kinetic analysis of the cyclotrimerisation reaction of a dicyanate ester monomer catalysed by cobalt(II) acetylacetonate and nonylphenol in air and argon atmospheres has been carried out by differential scanning calorimetry (DSC). Dynamic and isothermal DSC scans as well as the glass transition temperature are the experimental data obtained. From isothermal scans a higher cyanate conversion in air than in argon was obtained. The cyanate conversions are satisfactorily described with a second-order kinetic equation in the kinetically controlled region, and by m-order (m<1) equation after vitrification is reached. Activation energies determined by different procedures agree among them, showi…

Determination of the glass transition temperature of poly(cyclohexyl acrylate) from oxygen permeability measurements

1993

Abstract The glass transition temperature ( T g ) of poly(cyclohexyl acrylate) (PCA) has been obtained from measurements of the oxygen permeability ( P = 0.60 barrers, T g = 23.5 ± 2.0°C) using a potentiostatic electrochemical sensor, and from the oxygen diffusion coefficient ( D = 0.12 × 10 −8 cm 2 s −1 , T g = 24.0 ± 1.8°C) by the time-lag method. A T g of 25 ± 1°C was found by differential scanning calorimetry and a T g of 25.0 ± 3.5°C was obtained from the specific volume by dilatometry. The fractional free volume ( v f ) at T g is 0.020 ± 0.002, which is slightly below (∼ 20%) most glassy polymers. A linear correlation has been observed between ln D and the reciprocal of v f , which su…

The Electrical Properties of Ba1-ySryZrxTi1-xO3Solid Solution

2011

A lead-free solid solution Ba0.80Sr0.20Ti0.75Zr0.25O3 was prepared by a conventional technology. The structure and morphology of investgated samples were characterised by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The studies of electric conductivity were performed depending on temperature and frequency of electric measuring field. The activation energy was calculated from the Arrhenius plots.

Effect of Zr4+Doping on the Electrical Properties of BaTiO3Ceramics

2011

The BaZrxTi1-xO3 for 0⩽x⩽15 ceramics were prepared by a conventional solid state reaction method and were determined by an X-ray diffraction (XRD) and scanning electron microscopy (SEM) for crystallographic, surface morphological and compositional studies. A single phase with perovskite structure was identified in the samples at room temperature. No significant impurities were detected in an EDS spectrum and the samples are in good stoichiometric ratio. The temperature dependence of electric conductivity was evaluated in the temperature range from 300 to 550 K for a selected frequency by a HP4284 LCR meter. The activation energy was calculated from the Arrhenius plots.

Speciation and oxidation kinetics of arsenic in the thermal springs of Wiesbaden spa, Germany.

2001

Since 1886 arsenic has been known to be present as a trace component in the Wiesbaden thermal waters at concentrations of over 100 microg L(-1). In this study for the first time molecular level speciation of arsenic was measured both in the water (by HG-AAS) and in wellstone scale deposits (by XANES). Most of the arsenic in the anoxic NaCl-type waters is in the reduced arsenite form. Hydrous ferric oxide (HFO) precipitates in the scale deposits scavenge only the minor dissolved arsenate portion which is, however, accumulated up to 3% w/w. Isothermal precipitation experiments at in-situ temperatures showed a difference between the progress of both arsenic and iron oxidation and precipitation…

Study of ambient light influence for three-dimensional scanners based on structured light

2007

Ambient light in a scene can introduce errors into range data from most commercial three-dimensional range scanners, particularly scanners that are based on projected patterns and structured lighting. We study the effects of ambient light on a specific commercial scanner. We further present a method for characterizing the range accuracy as a function of ambient light distortions. After a brief review of related research, we first describe the capabilities of the scanner we used and define the experimental setup for our study. Then we present the results of the range characterization relative to ambient light. In these results, we note a systematic error source that appears to be an artifact…

Effects of tributyltin(IV) chloride on fertilization of Styela plicata (Ascidiacea: Tunicata): II. Scanning and transmission electron microscopy stud…

2003

The morphological aspects of Styela plicata fertilization after treatment with tributyltin(IV) chloride are described by means of scanning and transmission electron microscopy investigations. Alterations have been shown both on female and male gametes; spermatozoa, all the egg envelopes and the mitochondria of the egg cortical cytoplasm are modified in relation to incubation time. As a consequence, the damage to gametes blocks sperm-egg interaction and fertilization does not occur. Copyright © 2003 John Wiley &amp; Sons, Ltd.

Environmental scanning electron microscopy (ESEM) as a new technique to determine the ice nucleation capability of individual atmospheric aerosol par…

2007

Abstract Heterogeneous ice nucleation on synthetic silver iodide, natural kaolinite and montmorillonite particles via condensation, freezing and deposition modes was studied by environmental scanning electron microscopy (ESEM) in the temperature range of 250–270 K. By increasing the H2O pressure in the sample chamber at constant temperature, ice formation can be studied in situ and can be related to the chemical composition of the particles that can be determined simultaneously. For silver iodide and kaolinite, supersaturation values of first ice formation are in good agreement (1–2% absolute) with diffusion chamber experiments. For both substances, threshold temperatures for the condensati…

Pore-space characterization of an altered tonalite by X-ray computed microtomography and the14C-labeled-polymethylmethacrylate method

2012

[1] The structure of geological materials strongly affects migration processes that take place in them and are also important in their weathering and alteration processes. Further information of that structure will also be important for many applications that involve geological materials. The emphasis of this study was thus to characterize the pore structure and porosity of altered tonalite by combining different measuring techniques: X-ray tomography, the14C-polymethylmethacrylate method, electron microscopy, and argon pycnometry. Intragranular porosities were determined using chemical staining of rock surfaces. Three-dimensional distributions of minerals and porosities were evaluated with…

2017

Abstract. Eleven particle samples collected in the polar stratosphere during SOLVE (SAGE III Ozone loss and validation experiment) from January until March 2000 were characterized in detail by high-resolution transmission and scanning electron microscopy (TEM/SEM) combined with energy-dispersive X-ray microanalysis. A total of 4202 particles (TEM  =  3872; SEM  =  330) were analyzed from these samples, which were collected mostly inside the polar vortex in the altitude range between 17.3 and 19.9 km. Particles that were volatile in the microscope beams contained ammonium sulfates and hydrogen sulfates and dominated the samples. Some particles with diameters ranging from 20 to 830 nm were re…