Search results for "Scanning"
showing 10 items of 1808 documents
The use of lightweight expanded clay aggregate (LECA) as sorbent for PAHs removal from water.
2012
Author's version of an article in the journal: Journal of Hazardous Materials. Also available from the publisher at: http://dx.doi.org/10.1016/j.jhazmat.2012.03.038 Lightweight expanded clay aggregate (LECA) has been explored as a sorbent for the removal of PAHs (phenanthrene, fluoranthene and pyrene) from water. The efficacy of LECA as a sorbent for PAHs was assessed using contact time, mass of sorbent and sorption isotherms in a series of batch experiments. Maximum (optimum) sorption was reached at 21 h after which the amount of PAHs sorbed remained almost constant. Batch experiments were conducted by shaking a 100 ml solution mixture of individual PAHs (containing 0.02 mg/L) with LECA. T…
XRD microstructural analysis of mullites obtained from kaolinite–alumina mixtures
2000
Abstract A microstructural study of mullite obtained by the reaction sintering of kaolinite–α–alumina mixtures in the range 1150–1700°C has been performed by using X-ray line profile analyses together with scanning and transmission electron microscopy equipped with microanalysis by energy dispersion (SEM-EDS, TEM-AEM). Two kinds of morphology corresponding to primary (elongated grains) and secondary (equiaxed grains) mullite have been observed. A bimodal crystallite size distribution has been detected through XRD microstructural analysis from 1300°C. The results obtained by this method are compared with SEM/TEM data.
Graphene coating obtained in a cold-wall CVD process on the Co-Cr Alloy (L-605) for medical applications
2021
Graphene coating on the cobalt-chromium alloy was optimized and successfully carried out by a cold-wall chemical vapor deposition (CW-CVD) method. A uniform layer of graphene for a large area of the Co-Cr alloy (discs of 10 mm diameter) was confirmed by Raman mapping coated area and analyzing specific G and 2D bands
Attachment of yeast to modified stainless steel wire spheres, growth of cells and ethanol production
1999
Abstract The immobilization of yeast Saccharomyces cerevisiae, their growth and ethanol production were investigated using untreated and modified stainless steel wire spheres (WS) as carriers. The carrier surface was modified by oxidation, by treatment with titanium (IV) chloride (TiCl4) or by γ-aminopropyltrietoxysilane (AS) in an attempt to raise the efficiency of the immobilization of the yeast cells. The influence of the cell fixation method on culture growth and ethanol synthesis was investigated. The immobilization of cells to carrier surface was checked by scanning electron microscopy (SEM). More closely attachment of yeast cells was seen on the aminated wire surface. It was establis…
Long-term performance of peat biofilters treating ethyl acetate, toluene, and its mixture in air.
2006
Three laboratory-scale peat biofilters were operated at 90 s empty bed residence time (EBRT) for over a year. Biodegradation of ethyl acetate, toluene, or a 1:1 mixture were investigated. In first stage, inlet concentration was progressively increased from 0.4 to 4.5 g/m3. The maximum elimination capacity (EC) found for ethyl acetate was 190 gC/m3·h, and it was not affected by toluene. The maximum EC found for toluene as a sole contaminant was 150 gC/m3·h, but the presence of ethyl acetate decreased the toluene maximum EC to 80 gC/m3·h. From respirometry monitoring, values of 3.19 g CO2/gC and 3.06 g CO2/gC for pure ethyl acetate and pure toluene, respectively, were found, with overall yiel…
Quantitative description of temperature induced self-aggregation thermograms determined by differential scanning calorimetry
2012
A novel thermodynamic approach for the description of differential scanning calorimetry (DSC) experiments on self-aggregating systems is derived and presented. The method is based on a mass action model where temperature dependence of aggregation numbers is considered. The validity of the model was confirmed by describing the aggregation behavior of poly(ethylene oxide)-poly(propylene oxide) block copolymers, which are well-known to exhibit a strong temperature dependence. The quantitative description of the thermograms could be performed without any discrepancy between calorimetric and van 't Hoff enthalpies, and moreover, the aggregation numbers obtained from the best fit of the DSC exper…
Competition between α and γ phases in isotactic polypropylene: effects of ethylene content and nucleating agents at different cooling rates
2001
Abstract The influence of ethylene content, nucleating agents and cooling rate upon the formation of γ phase in isotactic polypropylene is investigated. Detailed analysis of wide angle X-ray diffraction shows that some γ phase can appear even in copolymers of very low ethylene content (0.5 mol.%). Differential scanning calorimetry shows a double melting peak. Nucleating agents of different types are found to enhance γ phase crystallization, even in high molecular weight homopolymers. In any of the materials studied the amount of γ phase decreases with increasing cooling rate, going to zero at a cooling rate of about 10°C s−1. We interpret the observations in terms of the kinetics of growth …
The role of crystalline, mobile amorphous and rigid amorphous fractions in the performance of recycled poly (ethylene terephthalate) (PET)
2012
[EN] The action of thermo-mechanical degradation induced by mechanical recycling of poly(ethylene terephthalate) was simulated by successive injection moulding cycles. Degradation reactions provoked chain scissions and a reduction in molar mass mainly driven by the reduction of diethyleneglycol to ethylene glycol units in the flexible domain of the PET backbone, and the formation of -OH terminated species with shorter chain length. The consequent microstructural changes were quantified taking into account a three-fraction model involving crystalline, mobile amorphous (MAF) and rigid amorphous fractions (RAF). A remarkable increase of RAF, to a detriment of MAF was observed, while the percen…
Taking Advantage of Selective Change Driven Processing for 3D Scanning
2013
This article deals with the application of the principles of SCD (Selective Change Driven) vision to 3D laser scanning. Two experimental sets have been implemented: one with a classical CMOS (Complementary Metal-Oxide Semiconductor) sensor, and the other one with a recently developed CMOS SCD sensor for comparative purposes, both using the technique known as Active Triangulation. An SCD sensor only delivers the pixels that have changed most, ordered by the magnitude of their change since their last readout. The 3D scanning method is based on the systematic search through the entire image to detect pixels that exceed a certain threshold, showing the SCD approach to be ideal for this applicat…
Smartphone-based bridge monitoring through vehicle-bridge interaction: analysis and experimental assessment
2022
AbstractIn this study, the results of a vast experimental campaign on the applicability of a smartphone-based technique for bridge monitoring are presented. Specifically, the vehicle–bridge interaction (VBI)-based approach is exploited as a cost-effective means to estimate the natural frequencies of bridges, with the final aim of possibly developing low-cost and diffused infrastructure monitoring system. The analysis is performed using a common hybrid vehicle, fully equipped with classical piezoelectric accelerometers and a smartphone MEMS accelerometer, to record its vertical accelerations while passing over the bridge. In this regard, the experimental campaign is carried out considering t…