Search results for "Silicon"
showing 10 items of 1391 documents
Surface preparation influence on the initial stages of MOCVD growth of TiO2 thin films
2006
In situ chemical surface analyses using X-ray photoelectron spectroscopy (XPS), completed by ex situ atomic force microscopy (AFM) analyses, were performed in order to compare the initial stages of MOCVD growth of TiO 2 thin films on two different surface types. The first type was a silicon native oxide free hydrogen terminated surface and the second one was a silicon dioxide surface corresponding to a thin layer of 3.5 nm thick in situ thermally grown on silicon substrate. Si(100) was used as substrate, and the growths of TiO 2 thin films were achieved with titanium tetraisopropoxide (TTIP) as precursor under a temperature of 675 °C, a pressure of 0.3 Pa and a deposition time of 1 h. Whate…
Laser-Ablation-Induced Synthesis of SiO2-Capped Noble Metal Nanoparticles in a Single Step
2010
Here we describe a simple, powerful technique based on the laser ablation of a target immersed in a water solution of a metal salt. With this method, nanoparticles of different metals and alloys can be processed very quickly. Both the target and the salt solution can be chosen to produce metal nanoparticles of different sizes, surface-oxidized nanoparticles (silica-silver, for example), or even more complex structures to be defined by the researcher on one or more steps because the technique combines the advantages of both physical and chemical methods. We have applied this technique to the fabrication of inert silica-metal (silver, gold, and silver-gold) nanoparticles with a strong surface…
Switchable Bactericidal Effects from Novel Silica-Coated Silver Nanoparticles Mediated by Light Irradiation
2011
Here we report on the triggering of antibacterial activity by a new type of silver nanoparticle coated with porous silica, Ag@silica, irradiated at their surface plasmon resonant frequency. The nanoparticles are able to bind readily to the surface of bacterial cells, although this does not affect bacterial growth since the silica shell largely attenuates the intrinsic toxicity of silver. However, upon simultaneous exposure to light corresponding to the absorption band of the nanoparticles, bacterial death is enhanced selectively on the irradiated zone. Because of the low power density used for the treatments, we discard thermal effects as the cause of cell killing. Instead, we propose that …
The Cryogenic AntiCoincidence detector for ATHENA: the progress towards the final pixel design
2014
“The Hot and Energetic Universe” is the scientific theme approved by the ESA SPC for a Large mission to be flown in the next ESA slot (2028th) timeframe. ATHENA is a space mission proposal tailored on this scientific theme. It will be the first X-ray mission able to perform the so-called “Integral field spectroscopy”, by coupling a high-resolution spectrometer, the X-ray Integral Field Unit (X-IFU), to a high performance optics so providing detailed images of its field of view (5’ in diameter) with an angular resolution of 5” and fine energy-spectra (2.5eV@E<7keV). The X-IFU is a kilo-pixel array based on TES (Transition Edge Sensor) microcalorimeters providing high resolution spectroscopy …
Biological tolerance of different materials in bulk and nanoparticulate form in a rat model: sarcoma development by nanoparticles
2006
In order to study the pathobiological impact of the nanometre-scale of materials, we evaluated the effects of five different materials as nanoparticulate biomaterials in comparison with bulk samples in contact with living tissues. Five groups out of 10 rats were implanted bilaterally for up to 12 months with materials of the same type, namely TiO 2 , SiO 2 , Ni, Co and polyvinyl chloride (PVC), subcutaneously with bulk material on one side of the vertebral column and intramuscularly with nanoparticulate material on the contralateral side. At the end of each implantation time, the site was macroscopically examined, followed by histological processing according to standard techniques. Malign…
Navigation accuracy after automatic- and hybrid-surface registration in sinus and skull base surgery.
2016
Objective Computer-aided-surgery in ENT surgery is mainly used for sinus surgery but navigation accuracy still reaches its limits for skull base procedures. Knowledge of navigation accuracy in distinct anatomical regions is therefore mandatory. This study examined whether navigation accuracy can be improved in specific anatomical localizations by using hybrid registration technique. Study design Experimental phantom study. Setting Operating room. Subjects and methods The gold standard of screw registration was compared with automatic LED-mask-registration alone, and in combination with additional surface matching. 3D-printer-based skull models with individual fabricated silicone skin were u…
Halogen exchange and expulsion: ligand stabilized dihalogen silicon dications
2000
The first ligand stabilized SiCl22+ dications were synthesized using N-methylimidazole as co-ordinating ligand. The compounds SiCl4, SiBr2Cl2, and SiH2Cl2 form six-co-ordinated dicationic compounds of almost octahedral symmetry with similar structures which were investigated by single crystal X-ray analysis and density functional calculations. The structures exhibit particularly short dative Si–N bonds of about 1.90 A. Complexes crystallized from the same solvent are isostructural. A different solvent, though, leads to geometrical variations. It was also discovered that the halogen exchange process among mixed silicon tetrahalides occurs under much milder conditions than previously thought …
Enhancing extraction performance of organophosphorus flame retardants in water samples using titanium hierarchical porous silica materials as sorbent…
2021
Abstract A sorbent for the extraction of organophosphorus flame retardants has been proposed, based on UVM-7 (University of Valencia Materials) mesoporous silica doped with titanium. Designed cartridges have been applied to the extraction and preconcentration of flame retardants in water samples, followed by gas chromatography coupled to a mass spectrometry detector. Firstly, UVM-7 materials with different contents of titanium were synthesized and characterized by several techniques, thus confirming the proper mesoporous architecture. The potential of these materials was assessed in comparison with their morphological properties, resulting Ti50-UVM-7 the best solid phase. Several extraction…
Preconcentration of emerging contaminants in environmental water samples by using silica supported Fe3O4 magnetic nanoparticles for improving mass de…
2011
A magnetic material based on Fe(3)O(4) magnetic nanoparticles incorporated in a silica matrix by using a sol-gel procedure has been used to extract and preconcentrate emerging contaminants such as acetylsalicylic acid, acetaminophen, diclofenac and ibuprofen from environmental water samples prior to the analysis with Capillary LC-MS. The use of the proposed silica supported Fe(3)O(4) magnetic nanoparticles enables surfactant free extracts for the analysis with MS detection without interferences in the ionisation step. Under the optimum conditions, we demonstrated the reusability of the magnetic sorbent material during 20 uses without loss in the extraction efficiency. In addition, no cleanu…
CCDC 1995925: Experimental Crystal Structure Determination
2020
Related Article: Dinh Cao Huan Do, Petra Vasko, M. Ángeles Fuentes, Jamie Hicks, Simon Aldridge|2020|Dalton Trans.|49|8701|doi:10.1039/D0DT01447H