Search results for "Slope"
showing 10 items of 141 documents
Modeling Round Robin Test: An Uncoupled Approach
2014
Abstract The solution of the modeling test presented in the paper is based on an uncoupled hydro-mechanical approach. Firstly, the controlled infiltration process is modeled by a finite element transient groundwater seepage software. Afterwards, calculated pore water pressures at successive instants are used for the slope stability analysis. Time evolution of the slope stability is analysed by using the infinite slope model, according to the classical limit equilibrium method.
Simple flume for flow measurement in sloping open channel
2007
First, this paper presents a new flume for measuring flow discharge in sloping channels, originally proposed by Samani and Magallanez for use in a horizontal channel. The flume is obtained by inserting two semicylinders in a rectangular cross section. Then, using dimensional analysis and the self-similarity theory, the stage-discharge relationship of the flume is theoretically deduced. For determining the two coefficients of the power stage-discharge equation, some experimental runs are carried out using flumes characterized by different values of the contraction ratio (ranging from 0.17 to 0.81) and of the flume slope (ranging from 0.5 to 3.5%). Finally, for a given range of the contractio…
Implications of terrain resolution on modeling rainfall-triggered landslides using a TIN- based model
2021
Abstract This study employs a distributed eco-hydrological-landslide model, the tRIBS-VEGGIE-Landslide, to evaluate the influence of terrain resolution on the hydro-geomorphological processes involved in slope stability analysis. The model implements a Triangulated Irregular Network (TIN) to describe the topography starting from a grid-DEM. Five grid-DEM resolutions of the case study basin, i.e., 10, 20, 30 and 70 m, are used to derive the corresponding TINs. The results show that using irregular meshes reduces the loss of accuracy with coarser resolutions in the derived slope distribution in comparison to slope distributions estimated from the original grid-based DEM. From a hydrological p…
Liquid-phase alkali-doping of individual carbon nanotube field-effect transistors observed in real-time
2011
The carbon nanotube (CNT) is known to be very sensitive to changes in its surrounding environment. Our study is on the effects of mild, liquid-phase alkali-doping on electronic transport in individual CNTs. We find clear and consistent reversal from p- to n-type behavior, with all seven investigated CNT field-effect transistors (FETs) retaining a similar ON/OFF ratio and subthreshold slope. We have also measured the realtime electronic response during liquid-phase doping, and demonstrate detection of alkali cations with a signal response that ranges over more than three orders of magnitude. The doping is fully reversible upon exposure to oxygen, and the doping cycle is repeatable. We also c…
Slope threshold for overland flow resistance on sandy soils
2021
Recent research on rill flows recognised that an 18% slope can be used to distinguish between ‘gentle’ and ‘steep’ slope cases for the detected differences in hydraulic (flow depth and velocity) and sediment transport variables (flow transport capacity, actual sediment load). The effects of slope on flow velocity, friction factor and transport capacity and their interactions affect process-based erosion modelling. The main aim of this paper is to investigate, for the first time, how slope affects the overland flow resistance on sandy soils, which are characterised by loose particles readily available to be transported and deposited. Using literature measurements carried out in sandy soils f…
Slope threshold in rill flow resistance
2022
The applicability of a theoretical rill flow resistance equation, based on the integration of a power velocity distribution, was tested using measurements carried out in mobile and fixed bed rills, shaped on plots having different slopes (9, 14, 15, 18, 22, 24, 25 and 26%) and soil textures (clay fractions ranging from 32.7% to 73% and silt of 19.9–30.9%), and flume measurements available in the literature. The Darcy–Weisbach friction factor resulted dependent on the slope, Froude number, Reynolds number and clay and silt percentages, used as variables representative of soil transportability and detachability, respectively. This theoretical approach was applied to two different databases di…
Estimating flow resistance in steep slope rills
2021
Recent research recognized that the slope of 18% can be used to distinguish between the ‘gentle slope’ case and that of ‘steep slope’ for the detected differences in hydraulic variables (flow depth, velocity, Reynolds number, Froude number) and those representatives of sediment transport (flow transport capacity, actual sediment load). In this paper, using previous measurements carried out in mobile bed rills and flume experiments characterized by steep slopes (i.e., slope greater than or equal to 18%), a theoretical rill flow resistance equation to estimate the Darcy-Weisbach friction factor is tested. The main aim is to deduce a relationship between the velocity profile parameter Γ, the c…
Testing the Stage-Discharge Relationship in Sloping SMBF Flumes
2021
The Samani, Magallanez, Baiamonte, Ferro (SMBF) flume is a simple and inexpensive instrument for indirect discharge measurement that was originally proposed for use in a horizontal channel and then also applied in sloping channels. The contraction of the flow cross section, aimed at establishing a critical flow condition, is simply obtained by applying two half cylinders to the walls of a rectangular cross section. In this paper a theoretical approach previously proposed for a horizontal SMBF flume is first extended to a sloping SMBF flume and a new stage-discharge relationship is deduced. Then, this equation is experimentally tested using laboratory measurements from literature for differe…
Large Eddy Simulations of Rough Turbulent Channel Flows Bounded by Irregular Roughness: Advances Toward a Universal Roughness Correlation
2020
The downward shift of the mean velocity profile in the logarithmic region, known as roughness function, $$\Delta U^+$$ , is the major macroscopic effect of roughness in wall bounded flows. This speed decrease, which is strictly linked to the friction Reynolds number and the geometrical properties which define the roughness pattern such as roughness height, density, shape parameters, has been deeply investigated in the past decades. Among the geometrical parameters, the effective slope (ES) seems to be suitable to estimate the roughness function at fixed friction Reynolds number, Re $$_{\tau }$$ . In the present work, the effects of several geometrical parameters on the roughness function, i…
Dieta del delfín de Risso (Grampus griseus) en el Mediterráneo occidental
2006
The diet of Risso’s dolphin in the Mediterranean is described based on 15 animals stranded between 40°25’N 00°32’W and 37°35’N 00°45’E from April 1987 to January 2003. The prey were mainly oceanic cephalopods. Pelagic octopods, especially A. argo, were the most abundant (mean = 41.28%; SD±34.32). Species belonging to the families Ommastrephidae, Histioteuthidae and Onychoteuthidae were also frequent components of its diet. The bathymetric distribution of cephalopods shows that Risso’s dolphin preferentially feeds on the middle slope (600 to 800 m depth) in the Mediterranean.