Search results for "Solar cell"
showing 10 items of 410 documents
Micromorph silicon tandem solar cells with fully integrated 3D photonic crystal intermediate reflectors
2010
A 3D photonic intermediate reflector for textured micromorph silicon tandem solar cells has been investigated. In thin-film silicon tandem solar cells consisting of amorphous and microcrystalline silicon with two junctions of a-Si/c-Si, efficiency enhancements can be achieved by increasing the current density in the a-Si top cell providing an optimized current matching at high current densities. For an ideal photon-management between top and bottom cell, a spectrally-selective intermediate reflective layer (IRL) is necessary. We present the first fully-integrated 3D photonic thin-film IRL device incorporated on a planar substrate. Using a ZnO inverted opal structure the external quantum eff…
Photoconductivity and optical properties of silicon coated by thin TiO2 film in situ doped by Au nanoparticles
2013
Light trapping enhancement by plasmonic-active metal nanoparticles (NPs) is believed to be a promising approach to increase silicon-based solar cell efficiency. Therefore, we investigated TiO2 films in situ doped by Au NPs (TiO2:AuNPs) deposited by spin coating on a silicon substrate. Photoconductivity and optical properties of the TiO2:AuNPs/Si structures were studied in comparison with those of TiO2/Si reference samples. We found that an introduction of the 40–50 nm diameter AuNPs into the antireflective TiO2 layer deteriorates the antireflection properties and decreases the external yield of photogeneration of charge carriers. This is due to an increase of the layer reflection in the red…
Plasmonic layers based on Au-nanoparticle-doped TiO2 for optoelectronics: structural and optical properties.
2013
The anti-reflective effect of dielectric coatings used in silicon solar cells has traditionally been the subject of intensive studies and practical applications. In recent years the interest has permanently grown in plasmonic layers based on metal nanoparticles, which are shown to increase light trapping in the underlying silicon. In the present work we have combined these two concepts by means of in situ synthesis of Au nanoparticles in a dielectric matrix (TiO2), which is commonly used as an anti-reflective coating in silicon solar cells, and added the third element: a 10–20% porosity in the matrix. The porosity is formed by means of a controllable wet etching by low concentration HF. As …
Carbon nanotubes and organic solar cells
2012
The use of carbon nanotubes in photovoltaics is still challenging due to different issues connected to their synthesis, purification, functionalization, processing and device integration. From this perspective at first we review on selected contributions dealing with the above issues; then we focus on the advantages and limitations of carbon nanotubes for the development of organic solar cells.
Unravelling steady-state bulk recombination dynamics in thick efficient vacuum-deposited perovskite solar cells by transient methods
2019
Accurately identifying and understanding the dominant charge carrier recombination mechanism in perovskite solar cells are of crucial importance for further improvements of this already promising photovoltaic technology. Both optical and electrical transient methods have previously been employed to strive for this warranted goal. However, electrical techniques can be strongly influenced by the capacitive response of the device which hides the carrier recombination dynamics that are relevant under steady state conditions. To ascertain the identification of steady state relevant charge carrier dynamics, it is beneficial to evaluate thicker films to minimize the impact of device capacitance. H…
Polymeric Thin Films for Organic Electronics: Properties and Adaptive Structures
2013
This review deals with the correlation between morphology, structure and performance of organic electronic devices including thin film transistors and solar cells. In particular, we report on solution processed devices going into the role of the 3D supramolecular organization in determining their electronic properties. A selection of case studies from recent literature are reviewed, relying on solution methods for organic thin-film deposition which allow fine control of the supramolecular aggregation of polymers confined at surfaces in nanoscopic layers. A special focus is given to issues exploiting morphological structures stemming from the intrinsic polymeric dynamic adaptation under non-…
Supramolecular Approach in Energy Conversion Devices
2020
This review summarizes investigations carried out at the Laboratory of Photochemistry and Energy Conversion (LFCE) in the University of Sao Paulo dealing with design and characterization of ruthenium(II), rhenium(I) and iridium(III) polypyridine complexes with desired photochemical and photophysical properties in light of the development of optoelectronics and photoinduced energy conversion systems. First, the breakthroughs on molecular engineering of emissive ReI, RuII and IrIII complexes for the development of highly efficient light-emitting devices, such as organic light-emitting diodes (OLEDs) and light-emitting electrochemical cells (LECs), are presented. Then, the photochemical and ph…
Highly Efficient Thermally Co-evaporated Perovskite Solar Cells and Mini-modules
2020
The rapid improvement in the power conversion efficiency (PCE) of perovskite solar cells (PSCs) has prompted interest in bringing the technology toward commercialization. Capitalizing on existing industrial processes facilitates the transition from laboratory to production lines. In this work, we prove the scalability of thermally co-evaporated MAPbI3 layers in PSCs and mini-modules. With a combined strategy of active layer engineering, interfacial optimization, surface treatments, and light management, we demonstrate PSCs (0.16 cm2 active area) and mini-modules (21 cm2 active area) achieving record PCEs of 20.28% and 18.13%, respectively. Un-encapsulated PSCs retained ∼90% of their initial…
Semitransparent Perovskite Solar Cells for Building Integration and Tandem Photovoltaics: Design Strategies and Challenges
2021
Over the past decade, halide perovskite systems have captured widespread attention among researchers since their exceptional photovoltaic (PV) performance was disclosed. The unique combination of optoelectronic properties and solution processability shown by these materials has enabled perovskite solar cells (PSCs) to reach efficiencies higher than 25% at low fabrication costs. Moreover, PSCs display enormous potential for modern unconventional PV applications, since they can be made lightweight, semitransparent (ST), and/or flexible by means of appropriate design strategies. In particular, by enabling transparency and high efficiency simultaneously, ST-PSCs hold great promise for future ve…
High-efficiency fullerene free ternary organic solar cells based with two small molecules as donor
2021
Abstract Herein, we have designed a ternary system comprising of two small molecules (B2 and B3), as donor and a narrow bandgap non-fullerene small molecule acceptor Y6. The chemical structures of B2 and B3 are close to each other but their absorption spectra are complementary with different energy levels. Using these small-molecules, a ternary organic solar cell was fabricated. The presence of B2 in the B3:Y6 blend increases the photon harvesting as well as also forms cascade energy level arrangement which benefits assisting the balancing between the dissociation of excitons into free charge carriers and their subsequent charge transfer between the two donors (B2 and B3) and the acceptor (…