Search results for "Specificity."
showing 10 items of 2232 documents
Role of ambient light in the detection of contrast elements in digital dental radiography.
2018
Objective This study aimed to evaluate the effect of different ambient light levels on observer detection of small contrast differences in a contrast phantom by using a high-end liquid crystal display (LCD) monitor. Study Design An aluminum step wedge was converted into a contrast phantom by the addition of bore holes. Radiographic images of the contrast elements were presented to 20 observers. Images were displayed in random order under different ambient light levels (0, 50, 200, and 500 lux) twice, and the observers had to determine if contrast elements were visible. Sensitivity and specificity were determined to calculate areas under receiver operating characteristic curves and Friedmann…
On-line analysis of carbonyl compounds with derivatization in aqueous extracts of atmospheric particulate PM10 by in-tube solid-phase microextraction…
2011
Abstract A new device for carbonyl compounds based on coupling on-line and miniaturizing both, sample pretreatment and chromatographic separation, is reported. Two capillary columns, a GC capillary column (95% methyl–5% phenyl substituted backbone, 70 cm × 0.32 mm i.d., 3 μm film thickness) in the injection valve for in-tube solid-phase microextraction (IT-SPME) and a Zorbax SB C18 (150 mm × 0.5 mm i.d., 5 μm particle diameter) LC capillary column were employed. Different combinations of IT-SPME and derivatization using 2,4-dinitrophenylhydrazine (DNPH) were examined for mixtures containing 15 carbonyl compounds (aliphatic, aromatic and unsaturated aldehydes and ketones). A screening analys…
New micromethod combining miniaturized matrix solid-phase dispersion and in-tube in-valve solid-phase microextraction for estimating polycyclic aroma…
2008
Abstract Miniaturized matrix solid-phase dispersion (MSPD) was developed for the extraction of common polycyclic aromatic hydrocarbons (PAHs) from bivalve samples (100 mg, dry weight). Additional clean-up and analyte enrichment was accomplished by in-tube solid-phase microextraction (SPME). For this purpose the extracts collected after MSPD were diluted with water and injected into a capillary column coated with the extractive phase. This capillary column was connected to the analytical column by means of a switching valve. Separation and quantification of the PAHs were carried out using a monolithic LC column and fluorescence detection. Since the in-tube SPME device allowed the processing …
Protein mapping by two-dimensional high performance liquid chromatography.
2000
Current developments in drug discovery in the pharmaceutical industry require highly efficient analytical systems for protein mapping providing high resolution, robustness, sensitivity, reproducibility and a high throughput of samples. The potential of two-dimensional (2D) HPLC as a complementary method to 2D-gel electrophoresis is investigated, especially in view of speed and repeatability. The method will be applied for proteins of a molecular mass <20 000 which are not well resolved in 2D-gel electrophoresis. The 2D-HPLC system described in this work consisted of anion- or cation-exchange chromatography in the first dimension and reversed-phase chromatography in the second dimension. We …
A direct Capillary Liquid Chromatography with electrochemical detection method for determination of phenols in water samples
2010
A fast and direct method based on the use of Capillary Liquid Chromatography (LC) with electrochemical (EC) detection has been described for phenols pollutants in water samples. Concretely, phenol, o-cresol, 2-chlorophenol and bisphenol A have been selected as target analytes. The combination of Capillary LC with EC detection avoided the necessity of preconcentration steps typically used in environmental analysis. The sample injected volume was 2 μL. The achieved detection limits were between 1 and 2 μg/L and the linear dynamic range was up to 50 μg/L for all studied phenols. The precision and uncertainty were satisfactory. The analysis time per sample was 10 min. The proposed procedure has…
Advantages of monolithic over particulate columns for multiresidue analysis of organic pollutants by in-tube solid-phase microextraction coupled to c…
2011
Abstract The performance of a monolithic C 18 column (150 mm × 0.2 mm i.d.) for multiresidue organic pollutants analysis by in-tube solid-phase microextraction (IT-SPME)-capillary liquid chromatography has been studied, and the results have been compared with those obtained using a particulate C 18 column (150 mm × 0.5 mm i.d., 5 μm). Chromatographic separation has been carried out under isocratic elution conditions, and for detection and identification of the analytes a UV-diode array detector has been employed. Several compounds of different chemical structure and hydrophobicity have been used as model compounds: simazine, atrazine and terbutylazine (triazines), chlorfenvinphos and chlorp…
Improving analysis of apolar organic compounds by the use of a capillary titania-based column: Application to the direct determination of faecal ster…
2010
This article reports a new procedure for the direct determination of faecal sterols coprostanol and cholesterol in wastewater samples as tracers of human sewage contamination. The method combines in-tube solid-phase microextraction (IT-SPME) for analyte enrichment and capillary liquid chromatography (LC) for separation with diode array detection for identification and quantification. A titania-based polymeric capillary column and a conventional octadecyl silica (ODS) capillary column were evaluated and compared for their ability to separate the analytes. The titania-based column allowed the separation of the analytes in much shorter chromatographic times and with better chromatographic prof…
A sequential-injection system for spectrophotometric determination of p -aminobenzoic acid in sunscreens.
2002
A sequential injection method is proposed for spectrophotometric determination of p-aminobenzoic acid (PABA) in cosmetic formulations. The method is based on diazotization of the analyte, coupling with 8-hydroxyquinoline, and the subsequent formation of a colored product. The experimental conditions used (coupling reagent, sandwich arrangement, volumes aspirated, propulsion flow rate, reaction coil length) were studied. Response of the sequential injection method were linearly dependent on concentrations up to 25 micro g mL(-1) and the detection limit was 2 micro g mL(-1). Throughput was 51 measurements per hour and a complete cycle, including three measurement per sample and a washing step…
Immunochromatographic Assay for Quantitation of Milk Progesterone.
1996
We describe a rapid immunochromatographic method for the quantitation of progesterone in bovine milk. The method is based on a 'competitive' assay format using the monoclonal antibody to progesterone and a progesterone-protein conjugate labelled with colloidal gold particles. The monoclonal antibody to progesterone is immobilized as a narrow detection zone on a porous membrane. The sample is mixed with colloidal gold particles coated with progesterone-protein conjugate, and the mixture is allowed to migrate past the detection zone. Migration is facilitated by capillary forces. The amount of labelled progesterone-protein conjugate bound to the detection zone, as detected by photometric scann…
Determination of fungicide residues in fruits and vegetables by liquid chromatography–atmospheric pressure chemical ionization mass spectrometry
2002
Abstract A liquid chromatography (LC) method for the quantitative determination of five fungicide residues (dichloran, flutriafol, o -phenylphenol, prochloraz and tolclofos methyl) in oranges, lemons, bananas, peppers, chards and onions is described. The residues were extracted by matrix solid-phase dispersion (MSPD) using C 8 . Quantitative analysis was performed by isocratic LC coupled to quadrupole mass spectrometer using atmospheric pressure chemical ionization in the negative ionization mode. The limit of quantification was 0.01 mg kg −1 for flutriafol, o -phenylphenol and dichloran, and 0.1 mg kg −1 for prochloraz and tolclofos methyl. The MSPD method is also suitable for LC–UV analys…