Search results for "Spectroscopy"
showing 10 items of 10293 documents
Automated high-performance liquid chromatographic determination of amphetamine in biological fluids using column-switching and on-column derivatizati…
1999
A rapid and simple liquid-chromatographic method has been developed for on-line quantification of amphetamine in biological fluids. Untreated samples (20 μL) are injected directly into the chromatographic system and purified on a 20 mm×2.1 mm i.d. pre-column packed with 30 μm Hypersil C18 stationary phase. After clean-up the analyte is transferred to the analytical column (125 mm×4 mm i.d., 5 μm LiChrospher 100 RP18) for derivatization and separation using a mixture of acetonitrile and the derivatization reagent (o-phthaldialdehyde andN-acetyl-L-cysteine) as the mobile phase. The experimental conditions for on-line derivatization and resolution of the amphetamine have been optimized, and th…
Development of a fully automated sequential injection solid-phase extraction procedure coupled to liquid chromatography to determine free 2-hydroxy-4…
2010
Abstract 2-Hydroxy-4-methoxybenzophenone and 2-hydroxy-4-methoxybenzophenone-5-sulphonic acid, commonly known as benzophenone-3 (BZ3) and benzophenone-4 (BZ4), respectively, are substances widely used as UV filters in cosmetic products in order to absorb UV radiation and protect human skin from direct exposure to the deleterious wavelengths of sunlight. As with other UV filters, there is evidence of their percutaneous absorption. This work describes an analytical method developed to determine trace levels of free BZ3 and BZ4 in human urine. The methodology is based on a solid-phase extraction (SPE) procedure for clean-up and pre-concentration, followed by the monitoring of the UV filters by…
Selection of calibration set samples in determination of olive oil acidity by partial least squares–attenuated total reflectance–Fourier transform in…
2003
Abstract A chemometric method has been applied for the determination of the free fatty acid (FFA) concentration in commercial olive oil samples of different types an origins by using Fourier transform infrared spectroscopy (FTIR) attenuated total reflectance (ATR) measurements. Different methods for selecting the training set, including hierarchical cluster analysis, were applied and compared. The prediction capabilities of partial least squares (PLS) multivariate calibration methods, net analyte signal (NAS) preprocessing followed by PLS or classical least squares (CLS) regression method of ATR–FTIR data were evaluated. Several aspects, like spectral range to be considered, different prepr…
Stir bar sorptive-dispersive microextraction mediated by magnetic nanoparticles-nylon 6 composite for the extraction of hydrophilic organic compounds…
2016
A new and sensitive analytical method based on the recently developed approach termed stir bar-sorptive dispersive microextraction (SBSDME) using a magnetic CoFe2O4@SiO2-nylon 6 composite as sorbent material is presented for the extraction of hydrophilic organic compounds. The simultaneous determination of four hydrophilic UV filters in environmental water samples has been chosen as a model analytical application due to the increasing awareness regarding the occurrence of sunscreen residuals in natural waters. The developed SBSDME approach combines the principles and benefits of stir bar sorptive extraction (SBSE) and dispersive solid phase extraction (DSPE) but allows for lower extraction …
Flow-injection determination of water in organic solvents by near-infrared spectrometry
1993
Abstract A flow-injection (FI) procedure was developed for the direct determination of water in organic solvents by using the O-H stretch absorbance band of water in the near-infrared (NIR) region. Dichloromethane was employed as a test solvent to study the influence of the flow parameters (carrier flow and sample injection volume) and time interval on the sensitivity and repeatability of the FI-NIR measurements. The developed procedure permits the determination of water in dichloromethane and isobutyl methyl ketone samples with limits of detection of 0.01 and 0.005% (v/v), respectively. Real and spiked samples of solvents were analysed by FI-NIR and accurate results were found. The method …
On-line bidirectional electrostacking of chromium(III) and chromium(VI) for flame atomic absorption spectrometry determination
2000
Abstract An on-line bidirectional electrostacking-flow injection-flame atomic absorption spectrometry method has been developed for the simultaneous separation, pre-concentration and determination of Cr(III) and Cr(VI). The electrostacking-flow injection unit was established, the pH and components of the support buffer and sample medium were investigated. Results indicated that the ionic mobility, electric field strength and sample area cross-section are the main influence factors on the electrostacking. The calibration range for both, Cr(III) and Cr(VI), was from 20 to 400 μg l −1 . The limit of detection was 7 μg l −1 for three-times the standard deviation of blank values using a electros…
Microwave-assisted saponification of animal greases for cholesterol determination
1998
Abstract An alternative method for the hydrolysis of cholesterol esters in animal grease samples has been developed. The method consists of the microwave-assisted treatment of 4 g of animal fat or oil with 40 ml of an ethanolic KOH solution inside a 115 ml closed reactor in which samples were irradiated for 2.5 min at 50% power level of an exit power of 700 W. After extraction with petroleum ether and dissolution of the unsaponifiables in toluene, total cholesterol was determined spectrophotometrically by using p-anisidine as a test reagent of the enzymatic reaction of cholesterol through a bienzymic reactor in which cholesterol oxidase and horseradish peroxidase were noncovalently immobili…
Determination of phenolic antioxidants in vegetal and animal fats without previous extraction by dilution with n-propanol and micellar liquid chromat…
1999
Abstract A simple and rapid HPLC method for the determination of phenolic antioxidants (propyl and octyl gallates, tert -butylhydroquinone and 3- tert -butyl-4-hydroxyanisole) in sunflower, corn and olive oils, margarine, lard and butter oil is described. The samples are diluted with n -propanol, filtered and injected; solutions containing 30% (w/w) sample can be injected. The analytes are separated with a C18 column and a micellar mobile phase containing 0.1 M SDS, 2.5% n -propanol and 10 mM phosphate of pH 3, and detected at 290 nm. Calibration curves are linear ( r > 0.9999) and the limits of detection range from 0.2 to 1.3 ng, which correspond to antioxidant concentrations well below t…
Determination of carbonates in waters by on-line vapor generation FTIR
1998
Abstract An electrically heated gas-permeation unit (GPU) has been employed for the vapor-generation Fourier transform infrared (FTIR) determination of total carbonate in waters. The developed method is based on the simultaneous injection of 100 μ l sample and 100 μ l nitric acid in a two-channel manifold with a merging zone, which provides the generation of CO 2 through the GPU, heated at 90°C, from which CO 2 is swept by a stream of N 2 to a long-path infrared gas cell. Absorbance measurements were made in the range from 2500 to 2150 cm −1 and the corresponding flow injection recordings were obtained as a function of time. The areas of these peaks are interpolated in a calibration equatio…
Fourier-transform infrared determination of nicotine in tobacco samples by transmittance measurements after leaching with CHCl3
1998
Abstract A new procedure is proposed for the FT-IR spectrometric determination of nicotine in tobacco. The method is based on the extraction of nicotine in CHCl 3 from tobacco samples, wetted with an aqueous solution of NH 3 (0.1 M), and the measurement of absorbance in the stopped-flow mode at 1316 cm −1 , using a spectral baseline correction established from 1334 to 1300 cm −1 . The procedure developed does not requires a complex sample preparation, and provides a limit of detection of 0.045 mg ml −1 nicotine, a sampling frequency of 3.3 h −1 and a coefficient of variation of 0.3% for five independent measurements of a tobacco sample with a nicotine content of 1.5% w/w. The accuracy of th…