Search results for "Stability."
showing 10 items of 3015 documents
Adsorption isotherms and thermal behavior of hybrids based on quercetin and inorganic fillers
2019
We investigated the adsorption process of quercetin onto several inorganic fillers, such as kaolinite, calcium carbonate and alumina. Firstly, we performed equilibrium adsorption studies in order to determine the quercetin/filler adsorption isotherms, which were successfully fitted through the Langmuir model. Based on the adsorption data analysis, we estimated the maximum adsorption capacity of each filler as well as the Langmuir constant, which is related to the affinity between quercetin and the surfaces of the inorganic particles. Then, we prepared hybrids formed by fillers saturated with quercetin. The obtained composites were characterized by thermogravimetric analysis with the aim of …
Surface modification of luminescent lanthanide phosphate nanorods with cationic "Quat-primer" polymers.
2011
"Quat-primer" polymers bearing cationic groups were investigated as a surface modifier for Tb-doped cerium phosphate green-emitting fluorescent nanorods (NRs). The NRs were synthesized by a microwave process without using any complex agents or ligands and were characterized with different analytical tools such as X-ray diffraction, transmission electron microscopy, and fluorescence spectroscopy. Poly(ethyleneimine) partially quarternized with glycidyltrimethylammonium chloride was synthesized separately and characterized in detail. (1)H and (13)C NMR spectroscopic studies revealed that the quaternary ammonium group was covalently attached to the polymer. UV-vis spectroscopy was used to exam…
Characterization of thermoelectric and thermogravimetric properties of conductive PEDOT:PSS films blended with SWCNTs and PVA
2019
Poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) was blended with polyvinyl alcohol (PVA) and single-walled carbon nanotube (SWCNT) filler to form composites with thermoelectric properties. Studied samples were obtained by drop coating and solution casting methods. Thermoelectric measurements of PEDOT:PSS demonstrated that the addition of 5 wt. % SWCNTs increased the Seebeck coefficient value from 8.0 μV/K to 23.6 μV/K, while in the case of PEDOT:PSS/PVA blended with 5 wt. % SWCNT Seebeck coefficient value of 20.3 μV/K was achieved. Thermogravimetric analysis showed slight SWCNT effect on thermal stability of the investigated systems.
A Maze of Solid Solutions of Pimobendan Enantiomers: An Extraordinary Case of Polymorph and Solvate Diversity
2017
Over 10 polymorphs and solvatomorphs of the chiral pharmaceutically active ingredient pimobendan were found to lack enantioselectivity in the solid state, accordingly, forming solid solutions of enantiomers, which is reported to be a rare phenomenon. Solid form screening was performed on different enantiomeric composition samples to analyze obtained phases with powder X-ray diffraction and thermogravimetric differential scanning calorimetry. For nonsolvated forms, a melt phase diagram has been constructed convincingly showing the existence of stable and metastable solid solutions near the pure enantiomer and around the racemic composition regions. A crystal structure study combined with sol…
Effect of plasma treatment on the properties of Arundo Donax L. leaf fibres and its bio-based epoxy composites: A preliminary study
2016
Abstract A preliminary investigation about the effect of plasma treatment on the properties of natural fibres extracted from the leaf of the giant reed Arundo Donax L. and their compatibility with a bio-based epoxy resin is performed. To this aim, the influence of plasma treatment on the functional groups and on the thermal behaviour of fibre were investigated using Fourier transform infrared spectroscopy and thermogravimetric analysis. Moreover, the mechanical characterization of fibres was performed through fibre tensile tests. Short randomly oriented fibres/bio-based epoxy composites were manufactured by hand lay-up method followed by compression moulding, varying both fibres weight cont…
Thermal and thermo-oxidative stability of reprocessed poly(ethylene terephthalate)
2013
An exhaustive assessment of the behaviour of virgin and mechanically reprocessed poly(ethylene terephthalate) (PET) facing thermal and thermo-oxidative decomposition processes is presented in this work, as an approach for the energetic valorisation of post-consumer PET goods. Multi-rate linear-non-isothermal thermogravimetric (TGA) experiments under inert (Ar) and reactive (O2) conditions were performed to virgin PET and its recyclates in order to simulate the thermal behaviour of the materials facing pyrolysis and combustion processes. The release of gases was monitored by evolved gas analysis of the fumes of the TGA experiment, by in-line Fourier-transform infrared (IR) analysis, with the…
Effect of Plasma Treatment on Mechanical and Thermal Properties of Marble Powder/Epoxy Composites
2016
The aim of this work was to study the effect of the plasma treatment on the behavior of composite structures reinforced with marble powder, obtained as processing waste in the “Custonaci” basin. Moreover, different filler amounts (i.e. 10%wt, 20%, 30% in weight) were investigated. For the mechanical characterization, tensile and flexural quasi-static tests, Charpy impact test, and dynamic mechanical thermal analysis (DMTA) were performed. For the thermal stability, thermogravimetric analysis was carried out. Finally, real density and fraction of voids were measured. It was observed that untreated marble powder, on one hand, increases tensile and flexural stiffness and improves thermal stabi…
Understanding the physicochemical properties of olive kernel to be used as a potential tool in the development of phenol-formaldehyde wood adhesive
2015
Abstract During olive oil production process, a great number of by-products are generated, including olive kernel. These by-products can be used for the development of new products for use in many different industrial applications. The evaluation of the physicochemical properties of these by-products constitutes a key factor in evaluating the potential reutilization of olive oil by-products. In the present study, the physicochemical properties of olive kernel were analyzed. Fourier transform infrared spectroscopy (FT-IR), cross-polarization magic angle spinning 13 C nuclear magnetic resonance (CP/MAS 13 C NMR), Brunauer, Emmett and Teller (BET), scanning electron microscopy (SEM) and thermo…
Nanocomposites based on esterified colophony and halloysite clay nanotubes as consolidants for waterlogged archaeological woods
2017
We have designed an innovative protocol for the consolidation of waterlogged archaeological woods by using acetone mixtures of halloysite clay nanotubes and a chemically modified colophony (Rosin). Firstly, we have investigated the thermal properties of HNTs/Rosin nanocomposites, which have been prepared by means of the casting method from acetone. The HNTs content have been systematically changed in order to study the influence of the inorganic filler on the thermal stability and glass transition process of Rosin. We have observed that the thermal properties of the hybrids are affected by the specific HNTs/Rosin interactions. Then, acetone dispersions of HNTs/Rosin composites at variable f…
Thermal Stability and Flame Retardancy of Polypropylene Composites Containing Siloxane-Silsesquioxane Resins
2018
A novel group of silsesquioxane derivatives, which are siloxane-silsesquioxane resins (S4SQ), was for the first time examined as possible flame retardants in polypropylene (PP) materials. Thermal stability of the PP/S4SQ composites compared to the S4SQ resins and neat PP was estimated using thermogravimetric (TG) analysis under nitrogen and in air atmosphere. The effects of the non-functionalized and n-alkyl-functionalized siloxane-silsesquioxane resins on thermostability and flame retardancy of PP materials were also evaluated by thermogravimetry-Fourier transform infrared spectrometry (TG-FTIR) and by cone calorimeter tests. The results revealed that the functionalized S4SQ resins may for…