Search results for "Stability"
showing 10 items of 3085 documents
VUV irradiance measurement of a 2.45 GHz microwave-driven hydrogen discharge
2015
Absolute values of VUV-emission of a 2.45 GHz microwave-driven hydrogen discharge are reported. The measurements were performed with a robust and straightforward method based on a photodiode and optical filters. It was found that the volumetric photon emission rate in the VUV-range (80-250 nm) is $10^{16}$-$10^{17}$ 1/cm$^3$s, which corresponds to approximately 8% dissipation of injected microwave power by VUV photon emission. The volumetric emission of characteristic emission bands was utilized to diagnostics of molecular plasma processes including volumetric rates of ionization, dissociation and excitation to high vibrational levels and metastable states. The estimated reaction rates impl…
Electromechanical Impedance Method to Assess the Stability of Dental Implants
2017
In this paper we illustrate the application of the electromechanical impedance (EMI) technique, popular in structural health monitoring, to assess the stability of dental implants. The technique consists of bonding a piezoelectric transducer to the element to be monitored. When subjected to an electric field, the transducer induces low to high frequency structural excitations which, in turn, affect the transducer's electrical admittance. As the structural vibrations depend on the mechanical impedance of the host structure (in this case the implant secured to the jaw), the measurement of the PZT's admittance can infer the progress of the osseointegration process. In the study presented in th…
Effect of media composition on long-term in vitro stability of barium alginate and polyacrylic acid multilayer microcapsules.
2000
For a number of applications stability of microcapsules is a critical factor. Since the maintenance of polyelectrolyte complexes depends considerably on the ion composition we tested the physical properties of barium alginate capsules and searched for conditions to improve stability by a multilayer coating with polyethylenimine (PEI) and polyacrylic acid (PAA). Mechanical stability and diameters were determined in barium alginate capsules and compared with multilayer capsules. Multilayer coating resulted in smaller capsules than barium complexing alone. The difference was more pronounced when CaCl2 was used instead of NaCl during coating. Barium alginate capsules and application of CaCl2 du…
Conductivities and silver electrode polarization resistance of solid electrolyte ceramics from ZrO 2 -Y 2 O 3 powder synthesized in air plasma
1998
Ceramic specimens have been obtained from the powder of ZrO2-7.5 mol% Y2O3 having a specific surface area of 30 m2/g synthesized in air plasma. The novelty of this research lies in the fact that the plasma process makes it possible to prepare so-called nanopowders with a particle size less than 100 nm, possessing specific physical, chemical and technological properties. The sintered density of the specimens was 94–96% of the theoretical value, 6.001 g/cm3. The X-ray diffraction pattern of the specimens corresponded to a face-centered cubic lattice. Impedance in the frequency range of 100 Hz–15 MHz and d.c. polarization curves in a potential range of −10 to 10 mV were measured in the tempera…
Compressive behavior of FRP externally wrapped R.C. column with buckling effects of longitudinal bars
2018
Abstract In this paper, a calculation model to simulate the compressive behavior of R.C. columns with square cross-sections externally wrapped with FRP, including buckling effects of the longitudinal bars and reduction of the confinement pressure induced by the buckled compressed bars, is presented and discussed. The model distinguishes the cases of corner and side bars, calculating the different critical lengths and the critical loads. The Teng et al. (2009) model was adopted to predict the compressive behavior of FRP-confined concrete, and the Dhakal and Maekawa (2002) model was taken into account to predict the compressive behavior of longitudinal bars. The critical length and critical s…
Passive alignment stability and auto-alignment of multipass amplifiers based on Fourier transforms.
2019
The stability properties of Fourier-based multipass amplifier to misalignments (tilts) of its optical components has been investigated. For this purpose, a method to quantify the sensitivity to tilts based on the amplifier small signal gain has been elaborated and compared with measurements. To improve on the tilt stability by more than an order of magnitude a simple auto-alignment system has been proposed and tested. This study, combined with other investigations devoted to the stability of the output beam to variations of aperture and thermal lens effects of the active medium, qualifies the Fourier-based amplifier for the high-energy and the high-power sector.
Properties-morphology relationships in electrospun mats based on polylactic acid and graphene nanoplatelets
2018
Abstract Aligned and randomly oriented polylactic acid (PLA) biocomposite nanofiber mats filled with Graphene nanoplatelets (GnP) were prepared by electrospinning. The morphological analysis revealed the successful alignment of the fibers achieved by collecting the mats on a high-speed rotary drum. Furthermore, GnP addition on the polymeric solution leads to an increase of the viscosity with a consequent increment of the fiber diameter. Tensile tests demonstrated that the reinforcing effect of GnP when added to the PLA matrix was more than three times higher in the aligned systems if compared with the respective randomly oriented mats. DSC analysis showed that GnPs were able to slightly inc…
Understanding the optical and bonding properties of hybrid metal-halide (C5H16NP) PbX4 (X = Cl, Br, I) perovskite: A density-functional theory study
2021
Abstract Hybrid perovskites have demonstrated high stability and a promising optoelectronic performance for solar-cells. The quest over their functionalities beyond photo-voltaic applications is currently an important challenge. In this work, we have used density-functional theory to study hybrid perovskites. In particular, we have explored how atomic substitution could be used to design their optoelectronic properties. Under this approach, we have investigated the effect of changing the halogen atom (X = Cl, Br, I) on the structural, electronic, and optical properties of (C5H16NP) PbX4 hybrid perovskites. The electronic properties have been computed using hybrid functionals including the …
Two-dimensional hydrogenated buckled gallium arsenide: an ab initio study
2020
First-principles calculations have been carried out to investigate the stability, structural and electronic properties of two-dimensional (2D) hydrogenated GaAs with three possible geometries: chair, zigzag-line and boat configurations. The effect of van der Waals interactions on 2D H-GaAs systems has also been studied. These configurations were found to be energetic and dynamic stable, as well as having a semiconducting character. Although 2D GaAs adsorbed with H tends to form a zigzag-line configuration, the energy differences between chair, zigzag-line and boat are very small which implies the metastability of the system. Chair and boat configurations display a [Formula: see text]-[Formu…
High-pressure Raman investigation of high index facets bounded alpha-Fe2O3 pseudocubic crystals
2021
[EN] High index facet bounded alpha-Fe2O3 pseudocubic crystals has gained the attention of the scientific community due to its promising electrochemical sensing response towards aqueous ammonia. The structural stability of alpha-Fe2O3 pseudocubic crystals is investigated through high-pressure Raman spectroscopy up to 22.2 GPa, and those results are compared with our ab initio theoretical calculations. The symmetry of the experimental Raman-active modes has been assigned by comparison with theoretical data. In addition to the Raman-active modes, two additional Raman features are also detected, whose intensity increases with compression. The origin of these two additional peaks addressed in t…