Search results for "Stability"
showing 10 items of 3085 documents
Effect of plasma treatment on the properties of Arundo Donax L. leaf fibres and its bio-based epoxy composites: A preliminary study
2016
Abstract A preliminary investigation about the effect of plasma treatment on the properties of natural fibres extracted from the leaf of the giant reed Arundo Donax L. and their compatibility with a bio-based epoxy resin is performed. To this aim, the influence of plasma treatment on the functional groups and on the thermal behaviour of fibre were investigated using Fourier transform infrared spectroscopy and thermogravimetric analysis. Moreover, the mechanical characterization of fibres was performed through fibre tensile tests. Short randomly oriented fibres/bio-based epoxy composites were manufactured by hand lay-up method followed by compression moulding, varying both fibres weight cont…
Thermal and thermo-oxidative stability of reprocessed poly(ethylene terephthalate)
2013
An exhaustive assessment of the behaviour of virgin and mechanically reprocessed poly(ethylene terephthalate) (PET) facing thermal and thermo-oxidative decomposition processes is presented in this work, as an approach for the energetic valorisation of post-consumer PET goods. Multi-rate linear-non-isothermal thermogravimetric (TGA) experiments under inert (Ar) and reactive (O2) conditions were performed to virgin PET and its recyclates in order to simulate the thermal behaviour of the materials facing pyrolysis and combustion processes. The release of gases was monitored by evolved gas analysis of the fumes of the TGA experiment, by in-line Fourier-transform infrared (IR) analysis, with the…
Effect of Plasma Treatment on Mechanical and Thermal Properties of Marble Powder/Epoxy Composites
2016
The aim of this work was to study the effect of the plasma treatment on the behavior of composite structures reinforced with marble powder, obtained as processing waste in the “Custonaci” basin. Moreover, different filler amounts (i.e. 10%wt, 20%, 30% in weight) were investigated. For the mechanical characterization, tensile and flexural quasi-static tests, Charpy impact test, and dynamic mechanical thermal analysis (DMTA) were performed. For the thermal stability, thermogravimetric analysis was carried out. Finally, real density and fraction of voids were measured. It was observed that untreated marble powder, on one hand, increases tensile and flexural stiffness and improves thermal stabi…
Understanding the physicochemical properties of olive kernel to be used as a potential tool in the development of phenol-formaldehyde wood adhesive
2015
Abstract During olive oil production process, a great number of by-products are generated, including olive kernel. These by-products can be used for the development of new products for use in many different industrial applications. The evaluation of the physicochemical properties of these by-products constitutes a key factor in evaluating the potential reutilization of olive oil by-products. In the present study, the physicochemical properties of olive kernel were analyzed. Fourier transform infrared spectroscopy (FT-IR), cross-polarization magic angle spinning 13 C nuclear magnetic resonance (CP/MAS 13 C NMR), Brunauer, Emmett and Teller (BET), scanning electron microscopy (SEM) and thermo…
Nanocomposites based on esterified colophony and halloysite clay nanotubes as consolidants for waterlogged archaeological woods
2017
We have designed an innovative protocol for the consolidation of waterlogged archaeological woods by using acetone mixtures of halloysite clay nanotubes and a chemically modified colophony (Rosin). Firstly, we have investigated the thermal properties of HNTs/Rosin nanocomposites, which have been prepared by means of the casting method from acetone. The HNTs content have been systematically changed in order to study the influence of the inorganic filler on the thermal stability and glass transition process of Rosin. We have observed that the thermal properties of the hybrids are affected by the specific HNTs/Rosin interactions. Then, acetone dispersions of HNTs/Rosin composites at variable f…
Thermal Stability and Flame Retardancy of Polypropylene Composites Containing Siloxane-Silsesquioxane Resins
2018
A novel group of silsesquioxane derivatives, which are siloxane-silsesquioxane resins (S4SQ), was for the first time examined as possible flame retardants in polypropylene (PP) materials. Thermal stability of the PP/S4SQ composites compared to the S4SQ resins and neat PP was estimated using thermogravimetric (TG) analysis under nitrogen and in air atmosphere. The effects of the non-functionalized and n-alkyl-functionalized siloxane-silsesquioxane resins on thermostability and flame retardancy of PP materials were also evaluated by thermogravimetry-Fourier transform infrared spectrometry (TG-FTIR) and by cone calorimeter tests. The results revealed that the functionalized S4SQ resins may for…
Synthesis and characterisation of a ternary composite of polyaniline, reduced graphene-oxide and chitosan with reduced optical band gap and stable aq…
2019
A ternary composite comprising of p-toluene sulfonic acid doped polyaniline (PANI), chitosan and reduced graphene oxide (RGO) with stable aqueous dispersibility has been synthesised via oxidative polymerisation of aniline in chitosan/RGO dispersion. For comparison; PANI, PANI/chitosan and PANI/RGO composites were also synthesised using the same procedure. FTIR, Raman, XPS, XRD and UV-VIS confirmed the successful synthesis of the PANI and the composites. The aqueous dispersions of the PANI/chitosan and the ternary composites were found to be stable even after more than four months. The stability of the dispersion was attributed to the polycationic nature of the chitosan. The thermogravimetri…
Preparation and Characterisation of Alendronate-Loaded Chitosan Microparticles Obtained Through the Spray Drying Technique
2009
Microparticles of chitosan (CHT) containing alendronate sodium (AL) were prepared in four drug:polymer ratios (1:1, 1:2, 1:4, 1:6) using the spray drying technique. The efficiency of the method was evaluated by determining production yield (about 70 %) and microencapsulation efficiency, which was almost 100 % in the case of all four of the formulations studied. Particles had a mean size of between 3.6 and 4.6 microm, and a near-spherical shape. The formulations with the highest content of AL (drug:polymer ratio 1:1 and 1:2) showed an asymmetrical distribution of particles, which were larger in size, and had a higher proportion of irregular particles than the other formulations. FT-IR analys…
Use of new hydroxytelechelic cis-1,4-polyisoprene (HTPI) in the synthesis of polyurethanes (PUs): Influence of isocyanate and chain extender naturean…
2006
AbstractNew segmented polyurethanes (thermoplastic-elastomers) based on previously described hydroxytelechelic cis-1,4-polyisoprene (HTPI), miscellaneous isocyanates and chain extenders at various equivalent ratios were prepared by the classical one-shot method. The influence of the nature of isocyanate and chain extender, as well as their equivalent ratios, on the mechanical and thermal materials behavior was investigated. Thus, a comparative assessment of material properties was performed. Microphase separation of hard and soft segments was observed by DMTA, DSC and AFM. Moreover, according to Thermogravimetric Analysis (TGA), linear relationships depending on the isocyanate and chain ext…
Modification of polyoxymethylene for increased thermal resistance
2017
Ternary nanocomposites, composed of polyoxymethylene (POM), ethylene octene copolymer and zinc oxide (ZnO), are prepared by melt compounding. The effects of two types of ethylene-octene copolymers, differing with α-octene content (38% for EOC38 and 17% for EOC17), as well as nanostructured ZnO on thermal behavior of POM are investigated. The content of EOC in the POM based composites is varied between 10 and 50 wt%, while the content of ZnO is 2 wt%. Thermal behavior of POM based systems are studied by using differential scanning calorimetry and thermogravimetric analysis coupled with Fourier transform infrared spectroscopy. Results of thermogravimetric analysis show that, by rising either …