Search results for "Stator"
showing 10 items of 123 documents
Design and Sensitivity Analysis of a Reduced-Order Rotor Flux Optimal Observer for Induction Motor Control
2007
This paper aims to give simple and effective design criteria of rotor flux reduced-order observers for motion control systems with induction motors. While the observer is optimized for rotor and stator resistance variations, a sensitivity analysis is carried out in the presence of variations of all the motor parameters by means of either transfer function from true to observed rotor flux or simulation in a MATLAB-SIMULINK environment, assuming the voltages supplying the motor to be different from those supplying the observer. The sensitivity analysis makes it possible to establish design criteria for the observer in question. The behaviour of the proposed reduced order observer is compared …
Least squares and genetic algorithms for parameter identification of induction motors
2001
Abstract This paper deals with off-line parameter identification of induction motors by means of least square (LS) techniques and genetic algorithms (GA), using stator voltages, stator currents and velocity as input–output data. For analytical identification by LS algorithms, filtering of experimental data is performed by means of anticausal filters. Two models useful for identification are derived in which the products of acceleration and rotor fluxes, usually neglected, are taken into account. The GA-based identification method consists of the determination of the best parameters which match input–output behaviour of the motor. Both methods are investigated and compared by means of experi…
A portable instrument for the location and identification of defects generating PD
2011
A portable instrument based on an antenna probe and suitable for partial discharge detection, have been characterized through both laboratory and on-site experiments carried out on coils and stator windings of ac rotating machines. The antenna probe allows the capture of electromagnetic waves in a bandwidth of 0.1–100 MHz. Pulse signals and ac supply voltage reference are obtained by means of high-pass and low-pass filters, respectively, so avoiding the need of a direct connection with the objects under test. By this way, real-time phase resolved partial discharge patterns can be derived. Results of a comparison of the diagnostic information provided by PD patterns due to conducted and irra…
Investigation of motor current signature and vibration analysis for diagnosing rotor broken bars in double cage induction motors
2012
This paper investigates the detectability of rotor broken bars in double cage induction motors using current signature and vibration analysis techniques. Double cage induction motors are commonly used for applications where successive loaded starts-up are mandatory. Experimental results were performed under healthy and faulty cases, and for different load conditions using each technique. Rotor broken bars fault detection based on sideband current components may fails due to the presence of inter bar currents that reduce the degree of rotor asymmetry, yielding to a decrease of the magnitude of these spectral components. But inter bar currents produce core vibrations in the axial direction, w…
Interior permanent magnet synchronous motors: Impact of the variability of the parameters on their efficiency
2016
In the scientific literature, various authors presented different control strategies aimed to increase the efficiency of the interior permanent magnet synchronous motors. These strategies, starting from a well-known mathematical model of the dynamic behaviour of the motor, are able to reduce the power losses acting on the magnetizing component of the stator current. However, none of the proposed approaches takes into account that, varying the working conditions of the motor, also the values of the parameters, which have an impact on the power losses, can vary. In this paper, therefore, starting from an accurate measurement of the motor characteristics for various values of speed and load, w…
A cogging torque minimization procedure for IPMSMs based on different laminate geometry
2016
This paper presents a possible minimization procedure of the cogging torque generated by an IPMSM (Interior Permanent Magnet Synchronous Machine) with a progressive modification of a basic geometrical structure of rotor laminates. More in detail, an IPMSM model is analyzed by using a Finite Element Method (FEM) approach. Then, other IPMSM models, which are obtained by modifying the geometry of the IPMSM rotor laminates and by maintaining the same stator configuration, are proposed and discussed. From the obtained simulation results, the cogging torque components for each structure are determined by means of FEM and compared to each other. From this comparison, it can be stated that the cogg…
A disc-type motor with co-axial flux in the stator; - influence of magnetic circuit parameters on the torque
2002
This paper presents a three-dimensional analysis of the magnetic field distribution for a three-phase, disc-type, permanent-magnet, brushless DC motor with co-axial flux in the stator. Calculations are carried out using the 3-D finite element method (FEM). The electromagnetic torque is determined from the Maxwell stress tensor. For comparison, various dimensions of permanent magnets, pole shoes and air gap are analysed. It is shown that the ripple-cogging torque can be effectively reduced by an appropriate permanent magnet width and air-gap length. The simulation results are in good agreement with experimental data obtained from the prototype motor.
A New Digital Demodulator for Sensorless Control of Electrical Drives with Permanent Magnet Synchronous Motors
2008
This paper deals a new digital demodulator algorithm for sensorless control of interior permanent magnet synchronous motors (IPMS) based on the estimation of speed and rotor angular position. To this aim a signal similar to that generated by a resolver connected to the shaft of the motor is obtained injecting high frequency stator currents. A new digital algorithm has been designed and set up to demodulate the above signal whose implementation can be carried out on the same DSP that processes the whole control algorithm. The proposed demodulator scheme is presented and justified on the theoretic point of view. Simulations results finally validate the effectiveness of the demodulator within …
Wind Electrical energy generating systems EMC. A dedicated experimental simulator for tests
2008
In wind electrical energy generating systems, due to fast voltage and current fluctuations, the power converter represents a source of electromagnetic disturbances. EMI problems of stand alone wind generators are here analysed in order to take into account many different power quality problems which result in voltage fluctuations and harmonics in the net. This paper, moreover, presents a wind turbine experimental simulator (WTES) that moves a wind electrical energy generating system (WEEGS) to carry out EMI measurements and the relative experimental results. The WEEGS here taken into account comprises a wound rotor induction generator (WRIG) in which the frequency transformation from the ro…
Vibration signature analysis for rotor broken bar diagnosis in double cage induction motor drives
2013
The paper investigates the diagnosis of rotor broken bars in field oriented controlled (FOC) double cage induction motor drives, using current and vibration signature analysis techniques. The Impact of the closed loop control system cannot be neglected when the detection of asymmetries in the machine are based on the signature analysis of electrical variables. The proposed diagnosis approach is based on optimized use of wavelet analysis by a pre-processing of phase current or axial/radial vibration signals. Thus, the time evolution of the tracked rotor fault components can be effectively analyzed. This paper shows also the relevance of the fault components computed from axial vibration sign…