Search results for "Stearate"
showing 10 items of 24 documents
Sensitive Analysis of Retinyl Esters by Isocratic Adsorption Chromatography
1989
A sensitive method for the determination of retinyl esters, including their geometric isomers, by isocratic adsorption HPLC is described. The development of a special recycling system allows the separation of all-trans-, 13-cis, 11-cis- and 9-cis-retinyl palmitate, -stearate, -oleate, -palmitoleate and -linoleate with short retention times and high sensitivity. Extraction of the retinyl esters from various organs with mobile phase avoids additional evaporation steps. The method was evaluated by the determination of retinyl esters in small tissue samples such as tongue, trachea and inner ear. This is the first report of the detection of retinyl esters in these tissues, which are known to dep…
One-step electrodeposition of superhydrophobic coating on 316L stainless steel
2021
Superhydrophobic coatings were fabricated through a one-step electrochemical process onto the surface of 316L stainless steel samples. The presence of hierarchical structures at micro/nanoscale and manganese stearate into the coatings gave superhydrophobicity to the coating, with contact angle of ~160°, and self-cleaning ability. Corrosion resistance of 316L samples was also assessed also after the electrodeposition process through Electrochemical Impedance Spectra recorded in an aqueous solution mimicking seawater condition.
Effect of surfactants and drying rate on barrier properties of emulsified edible films
2007
Summary The effects of globule size, nature and concentration of surfactant, and drying duration of water vapour transmission rate and tensile strength of emulsified edible barriers containing methylcellulose and paraffin wax, were measured. of the six surfactants tested, 0.6% purified glycerol monostearate (GMS) produced films with the lowest water vapour transmission rates and the highest mechanical resistance. Longer drying times of film-forming emulsions produced better barrier and mechanical properties. Control of the film forming emulsion stability allowed the reduction of the water vapour transfer rate by an order of magnitude.
Thermodesorption of LB-multilayers of metal stearates
1991
Thermodesorption of stearate multilayers containing different metal ions was investigated by Interference-enhanced Reflection (IeR) and Nomarsky microscopy. Heating of samples in air leads to desorption of stearyl chains and to formation of metal oxide clusters. A new approach to build controlled structures was made by preparing a surface with neighbouring hydrophobic and hydrophilic areas. It is shown that arranging inorganic particles in a predetermined way is possible.
Ultrathin metal films and inorganic clusters via thermodesorption of LB films
1991
Langmuir-Blodgett multilayers of cadmium arachidate and ferric stearate were investigated during heating in order to derive information on processes involved in thermodesorption and on the inorganic microstructures left on the substrate after thermodesorption. We studied these processes by X-ray induced photoelectron spectroscopy (XPS), interference enhanced reflection (IeR), Nomarsky microscopy, electron microprobe analysis and in the case of Fe57-ions by conversion electron Mossbauer spectroscopy (CEMS). Two different mechanisms of desorption were observed. In the case of cadmium arachidate multilayers it is shown that before desorption the film ruptures laterally and then forms droplets.…
Double Step Electrochemical Process for the Deposition of Superhydrophobic Coatings for Enhanced Corrosion Resistance
2021
Superhydrophobic surface on anodized AA5083 sample was obtained by an electrochemical process. Scanning Electron Microscopy and Fourier Transform Infrared Spectroscopy analyses revealed the hierarchical structure of the coating and the presence of manganese stearate. These features were crucial for the coating superhydrophobicity, demonstrated by a measured contact angle of ~ 163° and its self-cleaning ability. Electrochemical characterization in an aqueous solution mimicking seawater proved an enhanced corrosion resistance due to the superhydrophobic coating with respect to anodized AA5083 sample that also lasted after 20 immersion days in Cl- containing electrolyte.
On the difficulty of assessing the specific surface area of magnesium stearate
2001
Abstract The water content of as-received commercial magnesium stearate batches from animal and vegetable sources have been modified by ageing in humid air at room temperature or by vacuum treatment. The complete adsorption–desorption isotherms of nitrogen and krypton vapours by samples of these as received and modified materials have been measured at liquid nitrogen temperature after standardised vacuum degassing. They are greatly affected by the initial water content of the material. In particular: (a) the BET surface area values computed from the adsorption branch vary widely and is increasing with increasing water content; (b) anomalous hysteresis of varying amplitude is observed in all…
Absorber materials for low-energy neutrons—Theoretical and experimental studies
2012
Abstract Absorber materials for low-energy neutrons are studied in the theoretical framework of quantum mechanics with a complex potential. Analytical expressions and numerical calculations of the neutron reflectivity for perpendicular and isotropic motion towards a surface for four different material classes are presented. Comparative experimental studies of four absorber materials have been carried out: Polyethylene, titanium, boron-10 and lithium stearate. In a quasi-storage experiment with ultracold neutrons the latter material features the highest absorption property.
Production of vegetable oil-based biofuels—Thermochemical behavior of fatty acid sodium salts during pyrolysis
2009
Abstract To develop an advanced pyrolysis process for various biomass-derived feedstocks and improve product quality and yield, in-depth investigations into the reaction mechanisms are needed. This paper reports on pyrolysis experiments (Py-GC/MSD and FID) with model compounds including the sodium salts of stearic (C18), oleic (C18:1), and linoleic (C18:2) acids principally obtained from alkaline hydrolysis of vegetable oils. Of the parameters studied – temperature (450–750 °C), time (20 s and 80 s), and the degree of unsaturation (i.e., saturated and mono- and dienoic C18-hydrocarbon chains) – the latter had the most significant effect on the formation of volatile compounds detected in pyr…
Magnetic Langmuir-Blodgett films of ferritin with different iron contents.
2006
Magnetic Langmuir-Blodgett films of four ferritin derivatives with different iron contents containing 4220, 3062, 2200, and 1200 iron atoms, respectively, have been prepared by using the adsorption properties of a 6/1 mixed monolayer of methyl stearate (SME) and dioctadecyldimethylammonium bromide (DODA). The molecular organization of the mixed SME/DODA monolayer is strongly affected by the presence of the water-soluble protein in the subphase as shown by pi-A isotherms, BAM images, and imaging ellipsometry at the water-air interface. BAM images reveal the heterogeneity of this mixed monolayer at the air-water interface. We propose that the ferritin is located under the mixed matrix in thos…