Search results for "Stirred vessel"

Mixing dynamics in uncovered unbaffled stirred tanks

2014

Abstract The present work is aimed at providing experimental information on mixing rates in an unbaffled vessel under free surface vortexing conditions. The planar laser induced fluorescence (PLIF) technique was used for measuring the dispersion dynamics of a passive tracer over a vertical section of the vessel. In agreement with the quite scant literature information available for these systems, results confirm the existence of two well defined, partially segregated, zones that give rise to a double mixing dynamics behavior. A suitable mixing time definition is proposed and applied to a number of experimental runs with different stirrer geometries and agitation speeds. Results confirm that…

Residence time distribution of solid particles in a continuous, high-aspect-ratio multiple-impeller stirred vessel

2004

Abstract In this paper experimental information on the retention time distribution (RTD) of solid particles in a high-aspect-ratio vessel, stirred by three equally spaced Rushton turbines, is presented. The relevant data were obtained by a special technique named twin system approach (TSA) that greatly simplifies the handling of particle-laden streams and is therefore particularly suited for investigating particle RTD in flow systems. The technique fundamentals are first summarized, together with the data analysis procedure. This lastly requires a numerical deconvolution operation that is easily performed with the help of Z -transforms. Two different approaches for excluding the spurious co…

Free-surface shape in unbaffled stirred vessels: Experimental study via digital image analysis

2013

There is a growing interest in using unbaffled stirred tanks for addressing a number of processing needs such as low shear damage (sensitive biocultures), low attrition (solid–liquid applications), deep-cleaning/sterilization (pharmaceutical applications). The main feature of uncovered, unbaffled stirred tanks is highly swirling motion of the fluid that results in a deformation of the free liquid surface. At sufficiently high agitation speeds the resulting whirlpool reaches the impeller and gives rise to a gas–liquid dispersion, so leading to the formation of a dispersion without the use of gas-sparger; the so-called self-inducing operation of the vessel. In this work, digital image analysi…

Simplified dynamic pressure method for kLa measurement in aerated bioreactors

2010

Abstract A simplified version of the dynamic pressure method for measuring mass-transfer coefficients in gas–liquid systems is proposed. With this method oxygen concentration in the liquid phase is monitored after a sudden change of total pressure is applied to the system. With respect to the original technique introduced by Linek [14] the simplified version here proposed greatly simplifies the data treatment, yet resulting in good accuracy for most practical purposes. In practice, with the help of a simple mathematical model, it is found that the dynamic oxygen concentration response, when plotted as residual driving force versus time in a semi-log diagram, should be expected to finally se…

Gas-liquid-solid Operation of a High Aspect Ratio Self-ingesting Reactor

2012

Gas-liquid stirred vessels are widely employed to carry out chemical reactions involving a gas reagent and a liquid phase. The usual way for introducing the gas stream into the liquid phase is through suitable distributors placed below the impeller. An interesting alternative is that of using “self ingesting” vessels where the headspace gas phase is injected and dispersed into the vessel through suitable surface vortices. In this work the performance of a Long Draft Tube Self-ingesting Reactor (LDTSR) dealing with three-phase (gas-liquid-solid) systems, is investigated. Preliminary experimental results on the effectiveness of this contactor for particle suspension and gas-liquid mass transf…

Mass transfer and hydrodinamic characteristics of a high aspect ratio self-ingesting reactor for gas-liquid operations

2007

Abstract The mass transfer performance of a gas–liquid self-ingesting stirred reactor is reported both for coalescing and non-coalescing systems. The vessel features are a high aspect ratio and a rather narrow multiple-impeller draft tube, through which the gas phase is ingested and led down to the vessel bottom, where it is finely dispersed into the liquid rising in the annular portion of the vessel. Comparison is made between k L a values determined by several variants of the dynamic method, among which pure oxygen absorption in a previously de-gassed liquid phase. Results show that the gas–liquid mass transfer coefficient values obtained with the last approach are remarkably larger than …

Numerical simulations of the dependency of flow pattern on impeller clearance in stirred vessels

2001

The flow and turbulence fields in a fully baffled vessel stirred by a Rushton turbine have been simulated by means of computational fluid dynamics (CFD) techniques. The simulation techniques adopted (the "Sliding-grid" and "Inner-outer" methods) are fully predictive and require no experimental data as boundary or initial conditions. The effect of clearance (C) on the flow patterns in stirred vessels was simulated as the flow field transition observed can be considered a particularly stringent benchmark for the testing of CFD techniques. The results are compared with previously obtained LDA data and show that the double- to single-loop transition experimentally observed when impeller clearan…

Free vortex shape in Uncovered Unbaffled Stirred Tanks (UUST) agitated by Rushton turbines

2012

The main feature of unbaffled stirred tanks is the highly swirling liquid motion, which leads to the formation of a central vortex on the liquid free surface, when the vessel is operated without top-cover (Uncovered Unbaffled Stirred Tanks, UUST). In this work, original data on fluid dynamics characteristics of (UUST) agitated by a Rushton turbine are presented. In particular, digital image analysis is employed to accurately assess vortex shape and validate an original model for its description. The model describes vortex shape in the case of sub-critical systems (when vortex bottom is placed above the impeller plane) as well as in the case of super-critical systems (when vortex bottom fall…

NUMERICAL SIMULATION OF SEDIMENT RESUSPENSION IN MECHANICALLY STIRRED VESSEL

2008

On the Reduction of Power Consumption in Vortexing Unbaffled Bioslurry Reactors

2020

Bioremediation of polluted soils via bioslurry reactors is an interesting option among those available nowadays, especially when recalcitrant pollutants are present. Vortexing unbaffled stirred tanks may be a valuable choice to this purpose as they were recently found to be more efficient than baffled vessels for solid suspension processes where mixing time is not a controlling factor. When operated at sufficiently high agitation speeds, the central vortex bottom reaches the impeller and air bubbles start to be distributed throughout the system, thus avoiding any sparger and related clogging issues. In the present work, a vortexing unbaffled stirred tank with solid loadings ranging from 2.5…