Search results for "Strength"
showing 10 items of 2415 documents
Macro-oriented network of liquid-crystalline polyesters: crosslinking induced by g-irradiation and thermally activated reaction.
2000
Abstract The synthesis of a macro-oriented network from liquid-crystalline polymers, bearing pendant groups with unsaturations, is reported. Virgin polymers are processable to obtain oriented samples, e.g. fibres, which may be crosslinked through thermal activation and/or exposure to γ-radiation. The liquid-crystalline state is “frozen” and the macroscopic anisotropy is preserved even at high temperatures. Compared to virgin fibres, irradiated samples show an enhancement of tensile performances, thus indicating that the main effect of irradiation is crosslinking without significant degradation phenomena.
Melt spinning and mechanical properties of semirigid liquid-crystal copolyesters
1993
Melt-spinning and mechanical properties of fibers of a new class of semirigid thermotropic liquid-crystal polymers are presented. These copolyesters are synthesized from 4-4′-dihydroxybiphenyl (B), 4-hydroxybenzoic acid (H), and flexible units provided by aliphatic diacids. The flexible units depress the melting temperature without strongly depressing the mechanical properties. These liquid-crystal polymers can be easily spun at high draw ratios. Indeed, unlike rigid liquid-crystal polymers, relatively high draw ratios are needed to attain high mechanical strength. Tensile moduli of about 28 GPa and tensile strengths of about 350 MPa are obtained. © 1993 John Wiley & Sons, Inc.
Effect of irradiation temperature and dose rate on the mechanical tensile behaviour of low density polyethylene
1993
Abstract The effect of ageing due to gamma radiation, at various dose rates and temperatures, on the mechanical tensile behaviour of low density polyethylene is studied. In order to detect synergistic effects, tensile tests on samples subjected to thermal treatment corresponding to the same temperature for the same time as for the irradiation tests have also been performed. The results indicate a generalized decrease of the elongation at break, with brittleness of the material for the most severe ageing treatments. For modulus values, an increase is observed for particular experimental conditions. These results are related to morphological and structural modifications induced in the polymer…
Complete in-plane elastic characterisation under tensile tests of angle-ply laminates composed of polymer-matrix layers
2002
In this paper we present a new strategy to completely characterise the in-plane elastic properties of a large range of angle-ply laminates using only unidirectional tests. We consider laminates having the same number of identical plies in the α and – α directions. This new method uses some preceding results found by Verchery for orthotropic laminates, namely the conditions of existence of a specific direction ω, in which the shear-extension coupling is null. The characterisation of the laminate is then made using the results of three tensile tests: two in the orthotropy axes, and the third one in the ω direction, in order to have always a pure one-dimensional state of stress. We show that …
Effects of filler type and mixing method on the physical properties of a reinforced semirigid liquid crystal polymer
1996
Semirigid liquid crystalline polymers (LCPs) show some advantages with respect to rigid LCP: in particular lower processing temperatures, better compatibility with flexible thermoplastics, but also some disadvantages. Thermal resistance of rigid LCPs is much better and the maximum working temperature is, in general, very high. The thermomechanical properties can be improved by adding inorganic fillers. In this work processing, mechanical and thermomechanical properties of a filled semirigid liquid crystal copolyester are reported. Several inorganic fillers have been used in order to put in evidence the influence of shape and dimensions of the particles on the properties of the filled materi…
Processing and characterization of blends of fluoroelastomers with semirigid liquid crystal polymers
1996
Fluoroelastomers (FEs) usually have working temperatures above 150°C and a great resistance to aggressive agents such as oils, fuels, aliphatic and aromatic solvents, steam, moderate acid, and basic environments. Liquid crystal polymers (LCPs) can be effective processing aids and reinforcing agents for elastomers. These characteristics are very attractive to lower melt viscosity and to stiffen and strengthen the final product through a simple blending. Among the LCPs, the semirigid LCPs seem the most appealing for blending with flexible thermoplastics (FTs) because their processing temperatures can be arranged to be in the same processing temperature range of FTs and because the presence of…
Kenaf-filled biodegradable composites: rheological and mechanical behaviour
2012
Biodegradable polymer composites, typically based on biodegradable polymer matrices and natural-organic fillers, are gaining rising interest and importance over the last few years. Several natural-organic fillers can be used but the most widespread so far is wood, in the form of fibres or flour. Alternative cellulosic fillers can ensure advantages in terms of resource utilization and properties of the final composite. In this work, Mater-Bi® based biodegradable composites were prepared with two kinds of wood flour, and directly compared with alternative composites containing kenaf fibres. The use of kenaf fibres allowed improved elastic modulus, tensile strength and interaction with the pol…
Epoxy resins as a matrix material in advanced fiber-reinforced polymer (FRP) composites
2013
Abstract: This chapter discusses the epoxy resins which, thanks to their good and versatile properties, can be considered nowadays the most important class of thermosetting polymers. In particular the chapter first reviews both the epoxy resins commonly available on the market, including a new class of bio-derived epoxy resins, and the most-used curing agents. it then describes the principal characteristics of the epoxy resins and how it is possible to enhance them by adding several fillers to the epoxy system. Finally, the chapter analyzes the main engineering fields in which epoxy resins find application today and their possible future utilization.
Biopolymer interactions affect the functional properties of edible films based on agar, cassava starch and arabinoxylan blends
2009
Abstract Edible films based on the binary combination of agar (AG), cassava starch (CAS) and arabinoxylan (AX) were studied with regard to their microstructure, moisture barrier and mechanical properties. Though the films appear macroscopically homogeneous, electron microscopy observations reveal a phase separation and dispersion, respectively, in AG–CAS and AG–AX blend film structures, whereas the structure of CAS–AX blend films seems homogeneous. In case high moisture (84% and 99% RH), neither the combination of AG and CAS nor the addition of AX into CAS can improve film moisture barrier properties, except at a lower RH (57%). Conversely, water vapor permeability (WVP) of AG based film is…
Correlations of the nonexponentiality and state dependence of mechanical relaxations with bond connectivity in Ge-As-Se supercooled liquids
1992
We have studied the mechanical responses of supercooled Ge-As-Se liquids to flexural strains and temperature steps. The departures from exponential relaxation correlate well with the variations in connectivity. The structural state dependence of the mechanical relaxation, detected in pure and weakly cross-linked Se, is suppressed completely at the rigidity percolation threshold {l angle}{ital r}{sub {ital c}}{r angle}, where the liquid fragility is a minimum. The shapes of the decay functions of samples with the same {l angle}{ital r}{sub {ital c}}{r angle} but different compositions are not universal at {ital T}{sub {ital g}} probably because of chemical effects near the binary edges of th…