Search results for "Strength"

showing 10 items of 2415 documents

The effect of obesity combined with low muscle strengthon decline in mobility in older persons - Results from the InCHIANTI Study

2009

Objective: Both obesity and muscle impairment are increasingly prevalent among older persons and negatively affect health and physical functioning. However, the combined effect of coexisting obesity and muscle impairment on physical function decline has been little studied. We examined whether obese persons with low muscle strength experience significantly greater declines in walking speed and mobility than persons with only obesity or low muscle strength. Design: Community-dwelling adults aged ⩾65 years (n=930) living in the Chianti geographic area (Tuscany, Italy) were followed for 6 years in the population-based InCHIANTI study. Measurements: On the basis of baseline measurements (1998–2…

ikääntyminenaginglihavuusvanheneminenhuman activitiesmuscle strength decline
researchProduct

Effect of vertical loads on lateral response of infilled frames

2004

infilled frames masonry infills vertical load lateral stiffness lateral strength
researchProduct

On the Complexation of Cu(II) and Cd(II) With Polycarboxyl Ligands. Potentiometric Studies With ISE-H+, ISE-Cu2+, and ISE-Cd2+

2009

The interaction of Cu2+ and Cd2+ ions with polyacrylates (PAA, 2 kDa and 100 kDa), polymetacrylate(PMA, 5.4 kDa), and alginate (AA, 70 kDa to 100 kDa) was studied by potentiometry, using ISE-Cu2+, ISE-Cd2+, and ISE-H+ electrodes. The investigations were performed in NaNO3 aqueous solutions, in the ionic strength range 0.10 e I (mol ·L-1) e 0.75, at T ) 298.15 K. The “diprotic-like model” was used to explain the acid-base behavior of the polycarboxylates under investigation (for this model, the monomeric unit of the polyelectrolyte is considered as a dicarboxylate). The results give evidence for the formation of the ML species in all the systems investigated. In addition, the MLH species was…

inorganic chemicalsAcrylate polymerchemistry.chemical_classificationSequestering abilitypolycarboxylic acidsLigandGeneral Chemical EngineeringIonic strength dependencePotentiometric titrationInorganic chemistryGeneral ChemistryUronic acidComplexation Potentiometric study polyelectrolytesPolysaccharidePolyelectrolytechemistry.chemical_compoundchemistryIonic strengthSodium nitrateSettore CHIM/01 - Chimica Analiticapolycarboxylic acids; Sequestering ability; Ionic strength dependenceNuclear chemistryJournal of Chemical & Engineering Data
researchProduct

Incorporation of dynamic boronate links and Ag nanoparticles into PVA hydrogels for pH-Regulated and prolonged release of methotrexate

2021

Abstract In this study, pH-responsive hydrogels based on PVA-boronate crosslinks were prepared via a simple route and used for controlled and targeted delivery of anticancer drug methotrexate. A double network (DN) hydrogel composed of didiol-boronate/PVA complex as the first network and PVA crystallites generated by a freeze-thaw process as the second one was developed. The swelling of PVA-boronate DN hydrogels demonstrated high sensitivity to multiple stimuli including the pH, temperature, and ionic strength of the media thanks to the dynamic boronate links in the first network. Moreover, unlike previously reported hydrogels based on the boronate linkages, the new DN hydrogels preserved t…

inorganic chemicalsChemistrytechnology industry and agricultureCancer therapyPharmaceutical ScienceAg nanoparticlesmacromolecular substances02 engineering and technology021001 nanoscience & nanotechnologycomplex mixtures030226 pharmacology & pharmacyAnticancer drug03 medical and health sciences0302 clinical medicineChemical engineeringProlonged releaseIonic strengthSelf-healing hydrogelsmedicineMethotrexateSwellingmedicine.symptom0210 nano-technologymedicine.drugJournal of Drug Delivery Science and Technology
researchProduct

Comparison of Structure and Properties of Differently Treated Illite Clay and Products

2014

The investigation is focused on modification of the structure 2:1 sheet silicates - illite clay by subjecting them to chemical and microbiological impact. It is shown that alkaline activation of illite clay by sodium hydroxide leads to the slight structural changes mainly characterized by water link changes. The effect of bacteria Ps. fluorescens AM PS11on structure changes of illite is small and is influenced on rheology of treated clay.It is shown that the influence of chemical treatment on porosity, bulk density and increase of compressive strength of sintered ceramic samples is notable.

inorganic chemicalsMaterials scienceChemical treatmentMineralogyengineering.materialcomplex mixturesBulk densitychemistry.chemical_compoundCompressive strengthRheologychemistryChemical engineeringSodium hydroxidevisual_artIllitevisual_art.visual_art_mediumengineeringsense organsCeramicPorosityclay chemical biological impact ceramicMaterials Science and Applied Chemistry
researchProduct

Inorganic nanomaterials in the aquatic environment: behavior, toxicity, and interaction with environmental elements

2016

AbstractThe aim of this paper is to present characteristics, toxicity and environmental behavior of nanoparticles (NPs) (silver, copper, gold, zinc oxide, titanium dioxide, iron oxide) that most frequently occur in consumer products. In addition, NPs are addressed as the new aquatic environmental pollutant of the 21stcentury. NPs are adsorbed onto particles in the aquatic systems (clay minerals, fulvic and humic acids), or they can adsorb environmental pollutants (heavy metal ions, organic compounds). Nanosilver (nAg) is released from consumer products into the aquatic environment. It can threaten aquatic organisms with high toxicity. Interestingly, copper nanoparticles (Cu-NPs) demonstrate…

inorganic chemicalsPollutionlcsh:Environmental protectionmedia_common.quotation_subjectMetal ions in aqueous solutionchemistry.chemical_element02 engineering and technologyZinc010501 environmental sciences01 natural sciencesnanosilverchemistry.chemical_compoundAdsorptionpollutionlcsh:TD169-171.8nanocoppernanomaterials0105 earth and related environmental sciencesmedia_commonPollutantAquatic ecosystemtechnology industry and agriculturetoxicityGeneral Medicineaquatic environmental021001 nanoscience & nanotechnologychemistryIonic strengthEnvironmental chemistryTitanium dioxide0210 nano-technologyArchives of Environmental Protection
researchProduct

Il calcestruzzo poroso per il miglioramento delle condizioni di stabilità dei pendii sede di falda idrica

2022

Reduction of pore water pressures is a useful strate-gy to improve the stability conditions of slopes. Deep draining trenches can be used for this scope. For the realisation of deep trenches, the usual con-ventional construction techniques are not adequate and the use of adjacent vertical panels, built by means of the methods well established for dia-phragm walls, is necessary. However, unbonded ma-terials (i.e. gravels) cannot be used, since the excava-tion of a panel adjacent to already built ones will cause instability. For this scope a bonded material such as the pervious concrete can be used. It must have high permeability, filtering capacity in order to prevent the internal erosion of…

interface shear strengthPervious concreteSettore ICAR/07 - Geotecnicashear keys effect.
researchProduct

La resistenza di interfaccia calcestruzzo poroso-terreni a grana fina per il consolidamento di pendii mediante trincee drenanti profonde

2022

Le trincee drenanti profonde rappresentano uno dei metodi più efficaci per la mitigazione del rischio da frana, in pendii con falda idrica. Esse sono realizzate mediante pannelli o pali secanti. Il riempimento è costituito di calcestruzzo poroso o materiale granulare. Se le trincee sono adeguatamente “innestate” nel terreno stabile e il materiale di riempimento ha sufficiente resistenza e rigidezza come il calcestruzzo poroso, si ha ulteriore in-cremento di resistenza a taglio per effetto shear keys, oltre a quello derivante dalla riduzione delle pressioni in-terstiziali. L’incremento di resistenza è dovuto sia alla resistenza all’interfaccia calcestruzzo–terreni sia a quella intrinseca del…

interface shear strengthPervious concreteSettore ICAR/07 - Geotecnicashear keys effect. Pervious concrete for deep trench drains used to stabilise slopes must simultaneously satisfy many requirements namely adequate hydraulic conductiv-ity adequate shear strength a few days after pour-ing capacity to act as a protective filter for soils in which the drain is installed good resistance to clog-ging and adequate residual hydraulic conductivity. The pervious concrete with appropriated mix-design can effectively satisfy all the abovementioned requirements. If the trenches depth is such that they intersect the sliding surface and if the trenches are adequate-ly "socket" in the layers of stable soil there is a fur-ther increase in shear strength due to the shear keys effect. This latter is in addition to the increase in shear strength resulting from the reduction of inter-stitial pressures that remains the principal scope of the draining trenches. Obviously the increase of shear strength due to the shear keys effect occurs if the trenches are filled with material that have enough strength and stiffness such as the porous concrete. In this case the beneficial effects of the draining trenches on stability are also due to the resistance at the concrete interface of the trench - soils and to the intrinsic resistance of the concrete at the area of the trench intersected by the sliding surface taken into consideration.The increase in resistance due to the shear keys effect can be very significant in relation to the thickness and interspace of the trenches. Results reported in the paper demonstrated that the interface fine grained soil-pervious concrete is higher than the residual shear strength of the soil.
researchProduct

Corticospinal and intracortical excitability is modulated in the knee extensors after acute strength training

2022

The corticospinal responses to high-intensity and low-intensity strength-training of the upper limb are modulated in an intensity-dependent manner. Whether an intensity-dependent threshold occurs following acute strength training of the knee extensors (KE) remains unclear. We assessed the corticospinal responses following high-intensity (85% of maximal strength) or low-intensity (30% of maximal strength) KE strength-training with measures taken during an isometric KE task at baseline, post-5, 30 and 60-min. Twenty-eight volunteers (23 ± 3 years) were randomized to high-intensity (n = 11), low-intensity (n = 10) or to a control group (n = 7). Corticospinal responses were evoked with transcra…

intracortical inhibitionaivokuorihermo-lihastoimintaexercisemaximal strengthknee extensioncorticospinal excitabilityvoimaharjoitteluneuroplastisuusharjoitusvastelihasvoima
researchProduct

Thermodynamic Study For The Protonation Of Halloysite

2016

The Halloysite (Al2Si2O5(OH)4·2H2O) is an abundant and cheap clay and is considered one of the most promising nano structured and naturally occurring clay mineral. Large deposits of this material are present in France, Belgium, China, New Zealand and USA [1,2]. Among the spheroidal, tubular or platy morphologies, the tubular is the most common and abundant one. Typically, halloysite nanotubes (HNTs) are formed by 15 – 20 aluminosilicate layers, having a length of 1 ± 0.5 μm, and inner and outer diameters of 10 – 15 nm and 50 -70 nm, respectively [1]. In each layer, the SiOH and the AlOH groups are disposed on the external and the internal surfaces, respectively. As consequence, in each nano…

ionic strength.protonation constantspeciationacid-bsae propertieHalloysiteSettore CHIM/01 - Chimica Analitica
researchProduct