Search results for "Structural Engineering"
showing 10 items of 1998 documents
Boundary element modeling and analysis of adhesive bonded structural joints
2007
In this paper, a boundary element technique for modeling and analysis of adhesive bonded structural joints is presented. The formulation is developed in the framework of the anisotropic elasticity and attention is focused on the application to composite structural joints built with the splicing concept technique. To model and analyze composite bonded joints a multidomain implementation of the boundary element method has been used. It has been proven well suited and very effective for the characterization of the mechanical behavior of spliced joints, allowing the analysis of the high gradient stress and strain fields near the splice lines as well as the prediction of the overall distribution…
Behaviour in compression of lightweight fiber reinforced concrete confined with transverse steel reinforcement
2004
Abstract The compressive behavior of lightweight fiber reinforced concrete confined with transverse reinforcement consisting of steel stirrups or spirals was analyzed. Pumice stone and expanded clay aggregates were utilized to decrease the weight of the composite; hooked steel fibers were also added. The investigation was carried out by testing cylindrical and prismatic specimens of different sizes in compression using an open-loop displacement control machine, recording the full load–deformation curves. The influence of the dimensions and shape on the bearing capacity and on the ductility of the specimens confined with transverse steel reinforcements was analyzed. The results show the poss…
LOAD SUPPORT OF FRC CYLINDERS UNDER COMPRESSION
2000
ABSTRACT The purpose of this research is to look for the optimum structure applied FRC for load support by considering the biomimetic design. For example, cortical bone is made of FRC structures for load support in living bones. Making a start of analysis, the osteon being an structural unit of cortical bone was modelled in filament-wound (FW) cylinder. The first approximation of cortical bone was represented by the densest arrangement of the cylinders to focus on compressive behaviour of osteons. E-glass/epoxy cylinders were applied to specimens. Static compression tests were carried out to evaluate these models. On the osteon model, the smaller ply angle to the longitudinal direction gave…
Theoretical and Experimental Research on Mechanical Behavior of Layered Composites Laminates
2014
The aim of the research of the experiment was to determine the mechanical characteristics of the composite layered material. There has been two types of experimental tests i.e. test for determining the tensile modulus of elasticity of the material, the maximum voltage and the elongation at break of the material. The second type of test is the flexural test was intended to determine the maximum load that the breaking is produced by bending.
The influence of alternate block loading on the fatigue lifetime
2008
The paper presents the results of fatigue tests of cylinder specimens made of duralumin PA6 under alternate block loading for bending and torsion. Each block contains n and n cycles with sinusoidal course. Based on the fatigue curves amplitudes suitable for 105, 3·105 and 106 number of cycles to failure were determined. The loading was applied in alternate two-amplitudes blocks by 104, 3·104 or 105 each one (10% of the fatigue life for the given loading level) until failure of the specimen (fig.1).
Study of the Formability of Light Metallic Materials
2015
There is a continuing interest in using laminated materials for the production of lightweight parts, the resulting parts having the same functionality and even an increased stiffness and length of operation compared to conventional materials. The present paper aims to study the forming behavior of the laminated materials that requires the unfolding of tests to determine the tensile mechanical properties and the intrinsic properties, determining the forming limit curves by means of the Nakajima test and the analysis of the behavior at unconventional incremental forming.
Flexural response of FRC corbels
2009
Abstract A strut-and-tie macro-model is proposed to determine the flexural response of fiber reinforced concrete (FRC) corbels, reinforced with longitudinal bars and subjected to vertical load. The effects of the corbel geometry, the percentage of steel fibers, and grades of concrete and steel bars are also included. The model, which is specific for FRC corbels with hooked steel fibers, allows the determination of load levels, and corresponding displacements, associated with the first cracking, yielding of the main steel bars and crushing of the concrete strut. The sequential occurrence of these phenomena is established, depending on the amounts of steel fibers and reinforcing steel. The si…
Prediction of Dissipative Properties of Flax Fibers Reinforced Laminates by Vibration Analysis
2016
This study proposes an experimental-numeric method to identify the viscoelastic properties of flax fibres reinforced composite laminate (flax/epoxide). The used method consists in identifying the evolutions of both loss factor and stiffness when vibrational frequency changes. In this way, several free-free symmetrically guided beams are excited on a dynamic range of 10 to 4000 Hz with sweep sine excitation focused around the 4-first’s modes. Fractional derivative Zener model is used to identify the on-axis ply complex moduli and describe the laminate dissipative linear behavior with the classical laminate theory. Results obtained on a quasi-isotropic laminate show that this model adequately…
Steel fiber-reinforced concrete corbels:experimental behavior and shear strength prediction
2007
Corbels are structural members often used in reinforced concrete structures to transfer vertical and horizontal forces to principal members. This paper presents experimental research regarding the flexural behavior of corbels in plain and fibrous concrete and in the presence of steel bars. The study considers the influence of the type of concrete grade (normal- and high-strength concretes), of the fiber percentage and of the arrangement and percentage of the steel bars on the flexural behavior of the corbels. The results in terms of load-deflection curves and crack patterns show the effectiveness in using fibrous reinforced concrete corbels as well as in the presence of stirrups ensuring ad…
Tensile behaviour of patch-repaired CFRP laminates
2011
The present study examines the tensile behaviour of composite structures repaired by bonding external patches. Various patches of different stacking sequences placed on both sides of the parent plate were considered. Damage development and the failure process of the repaired plates were analyzed and a parent plate fracture model has been proposed. Optimised patch repairs were calculated by finite element modelling. It was found that high stress concentration along the longitudinal edges of circular patches and/or at the transverse edges of the hole leads to early damage initiation in the parent plate. However, the position of damage initiation and the process of damage progression depend pa…