Search results for "Structural Engineering"
showing 10 items of 1998 documents
Real-time pricing for aggregates energy resources in the Italian energy market
2015
Abstract Over the last decade, the architecture of the energy market has radically changed. In many countries end-users are now able to directly access the market, which has given rise to the question of how they can actively participate in that market. End-users can comprise a critical mass through aggregation that is carried out by a third party – to wit the “loads aggregator.” This paper proposes a new framework for generating feasible real-time price curves for those end-users in a demand-response management process. The underlying algorithm generates output curves as the solution to a constrained optimization problem whose objective function is the aggregator's economic benefit. A case…
Optimization of net power density in Reverse Electrodialysis
2019
Abstract Reverse Electrodialysis (RED) extracts electrical energy from the salinity difference between two solutions using selective ion exchange membranes. In RED, conditions yielding a large net power density (NPD) are generally desired, due to the still large cost of the membranes. NPD depends on a large number of physical and geometric parameters. Some of these, for example the inlet concentrations of concentrate and diluate, can be regarded as “scenario” variables, imposed by external constraints (e.g., availability) or chosen by different criteria than NPD maximization. Others, namely the thicknesses HCONC, HDIL and the velocities UCONC, UDIL in the concentrate and diluate channels, c…
Storm sewer pressurization transient – an experimental investigation
2014
Pipe pressurization is examined experimentally by 144 laboratory experiments in a circular tilting pipe between two tanks, in which the transient was triggered by sudden closing of the downstream tank outlet. The experiments cover ranges of values of slope, velocity and filling ratio of the open-channel flow not explored in previous studies. Situations involving considerable air quantity and consequent intense pressure oscillations were also reproduced. Two different pressurization patterns, defined as “smooth” and “abrupt”, were observed, but only the abrupt pattern produced intense pressure oscillations. The comparison among all the abrupt pressurization surges showed how the oscillations…
Fatigue of Mooring Chains Connected to Offshore Floating Structures Considering Out of Plane Bending Effects
2019
Abstract Reliability against fatigue fracture is an issue of major concern in the design of offshore mooring systems with chain segments. The present paper describes the investigation of the effect of OPB (out of plane bending) and IPB (in plane bending) loading modes on the fatigue performance of chain links in critical positions. The hang-off design at the floater is based on long rods with bearings at the connection points to the floating structure. The purpose of the paper is to shed some light on possible design improvements on the connection design when using the available design guidelines for calculation of combined Tension-Bending fatigue in the mooring line. A challenge when using…
Out-of-plane behaviour of unreinforced masonry infill walls: Review of the experimental studies and analysis of the influencing parameters
2021
Abstract Over the last 50 years, research has mainly focused on characterizing the In-Plane behaviour of unreinforced masonry infill walls. Recently, the focus of research has been addressed to understanding Out-of-Plane behaviour, also from the experimental point of view. However, in the experimental campaigns, there is high variability in the geometrical and mechanical properties of URM infill walls and also in the application of Out-of-Plane loads. Therefore, it is important to outline and critically evaluate the major findings obtained by experimental studies and identify research gaps to better understand the differences and the affinity of apparently equivalent tests. In this paper, t…
Numerical Analysis of Bearing Capacity of a Ring Footing on Geogrid Reinforced Sand
2021
A ring footing is found to be of practical importance in supporting symmetrical constructions for example silos, oil storage container etc. In the present paper, numerical analysis was carried out with explicit code FLAC3D 7.0 to investigate bearing capacity of a ring footing on geogrid reinforced sand. Effects of the ratio n of its inner/outer diameter (Di/D) of a ring footing, an optimum depth to lay the geogrid layer were examined. It was found that an intersection zone was developed in soil under inner-side (aisle) of ring footing, contributing to its bearing capacity. Substantial increase of bearing capacities could be realized if ratio n of a ring footing was around 0.6. Numerical res…
Thermophilic anaerobic digestion of pulp and paper mill primary sludge and co-digestion of primary and secondary sludge
2012
Anaerobic digestion of pulp and paper mill primary sludge and co-digestion of primary and secondary sludge were studied for the first time in semi-continuously fed continuously stirred tank reactors (CSTR) in thermophilic conditions. Additionally, in batch experiments, methane potentials of 210 and 230 m³CH₄/t volatile solids (VS)(added) were obtained for primary, and 50 and 100 m³CH₄/tVS(added) for secondary sludge at 35 °C and 55 °C, respectively. Anaerobic digestion of primary sludge was shown to be feasible with organic loading rates (OLR) of 1-1.4 kgVS/m³d and hydraulic retention times (HRT) of 16-32 d resulting in methane yields of 190-240 m³CH₄/tVS(fed). Also the highest tested OLR o…
Vertical distribution of AhR-activating compounds in sediments contaminated by modernized pulp and paper industry
2013
Increased ethoxyresorufin-O-deethylase (EROD) activity is a sensitive biomarker of exposure to the chemicals which activate the aryl hydrocarbon receptor (AhR) and induce the cytochrome P450 system, such as many polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs) and polychlorinated biphenyls (PCBs). Pulp bleaching was one of the main sources of PCDDs and PCDFs until elemental chlorine free (ECF) and total chlorine free bleaching processes since 1990s have remarkably decreased but not completely eliminate discharges of these chemicals. In addition, historically contaminated sediments may act as a source of these persistent contaminants. In this study, the contam…
On thermo-mechanical issues induced by irradiation swelling inside the back-plate of the IFMIF target assembly
2011
Abstract Within the framework of the IFMIF R&D program and in close cooperation with ENEA-Brasimone, at the Department of Nuclear Engineering of the University of Palermo a research campaign has been launched to investigate the thermo-mechanical issues potentially induced by irradiation swelling in the threaded connections between frame and back-plate of IFMIF target assembly. The main aim of the research campaign has relied in the assessment of the maximum swelling-induced volumetric strain that may be accepted in order to allow screws to withstand thermo-mechanical stresses and work in safe conditions or to avoid unduly high unscrewing torques during back-plate remotely handled maintenanc…
Boundary-layer effects in wedges of piezoelectric laminates
2005
An approach to investigate boundary-layer effects in wedges of piezoelectric laminated structures is presented with the aim of ascertaining the electromechanical response characteristics. The wedge layer behavior is described in terms of generalized stress functions, which lead to a model consisting of a set of three coupled partial differential equations. The strength of the solution singularity is determined by solving the eigenvalue problem associated with the resolving system. The solution of the model is obtained by an eigenfunction expansion method coupled with a boundary collocation technique. Correspondingly, the singularity amplitude is assessed by introducing and calculating the g…