Search results for "Structural Engineering"

showing 10 items of 1998 documents

Closure to “Experimental Study of Central Baffle Flume” by F. Lotfi Kolavani, M. Bijankhan, C. Di Stefano, V. Ferro, and A. Mahdavi Mazdeh

2020

This is a Closure of the discussions on the paper “Experimental Study of Central Baffle Flume” by F. Lotfi Kolavani, M. Bijankhan, C. Di Stefano, V. Ferro, and A. Mahdavi Mazdeh

FlumeFlumeClosure (topology)Settore AGR/08 - Idraulica Agraria E Sistemazioni Idraulico-ForestaliBaffleGeometryAgricultural and Biological Sciences (miscellaneous)GeologyWater Science and TechnologyCivil and Structural EngineeringJournal of Irrigation and Drainage Engineering
researchProduct

Closure to “Testing the Stage-Discharge Relationship in Sloping SMBF Flumes” by Francesco Giuseppe Carollo and Vincenzo Pampalone

2022

This is the closure to the discussions on the paper "Testing the Stage-Discharge Relationship in Sloping SMBF Flumes".

FlumeSettore AGR/08 - Idraulica Agraria E Sistemazioni Idraulico-Forestaliflow measurementAgricultural and Biological Sciences (miscellaneous)stage-discharge relationshipWater Science and TechnologyCivil and Structural EngineeringJournal of Irrigation and Drainage Engineering
researchProduct

Simultaneous Flow over and under a Gate

2000

This paper reports the results of an investigation carried out to establish the stage-discharge relationship for a flow simultaneously discharging over and under a sluice or a broad-crested gate. The stage-discharge relationship is deduced by a theoretical analysis, based on the application of the Π-theorem of the dimensional analysis and the incomplete self-similarity theory, coupled with an experimental investigation carried out by using a laboratory flume.

FlumeWater flowHydraulic equipmentSluiceFlow (psychology)WeirMeasuring instrumentEnvironmental scienceGeotechnical engineeringAgricultural and Biological Sciences (miscellaneous)Discharge coefficientWater Science and TechnologyCivil and Structural EngineeringJournal of Irrigation and Drainage Engineering
researchProduct

Closure to “New Stage-Discharge Equation for the SMBF Flume” by Francesco Giuseppe Carollo, Costanza Di Stefano, Vito Ferro, and Vincenzo Pampalone

2017

Flumemedia_common.quotation_subjectClosure (topology)CalculusGeometryStage (hydrology)ArtAgricultural and Biological Sciences (miscellaneous)Water Science and TechnologyCivil and Structural Engineeringmedia_commonJournal of Irrigation and Drainage Engineering
researchProduct

Multiplicative cases from additive cases: Extension of Kolmogorov–Feller equation to parametric Poisson white noise processes

2007

Abstract In this paper the response of nonlinear systems driven by parametric Poissonian white noise is examined. As is well known, the response sample function or the response statistics of a system driven by external white noise processes is completely defined. Starting from the system driven by external white noise processes, when an invertible nonlinear transformation is applied, the transformed system in the new state variable is driven by a parametric type excitation. So this latter artificial system may be used as a tool to find out the proper solution to solve systems driven by parametric white noises. In fact, solving this new system, being the nonlinear transformation invertible, …

Fokker-Planck equation; Itô's calculus; Kolmogorov-Feller equation; Parametric forces; Poisson input; Stochastic differential calculusState variableAerospace EngineeringOcean EngineeringKolmogorov-Feller equationPoisson inputlaw.inventionlawCivil and Structural EngineeringMathematicsParametric statisticsParametric forceMechanical EngineeringMathematical analysisFokker-Planck equationStatistical and Nonlinear PhysicsWhite noiseCondensed Matter PhysicsItô's calculuNonlinear systemNoiseInvertible matrixNuclear Energy and EngineeringFokker–Planck equationStochastic differential calculusPoisson's equationProbabilistic Engineering Mechanics
researchProduct

Special issue on Trends and challenges of sustainable irrigated agriculture

2014

In the twenty-first century, the shortage of freshwater is one of the most important environmental concerns facing several regions of the world because of the growing demand of increasing population, agricultural intensification, and economic growth. Global climate change will contribute to exacerbate the problem, generating new drought-prone areas and increasing those already characterized by severe aridity. Worldwide it is estimated that, on average, agriculture accounts for 70% of the total water consumption, compared with 10% for domestic consume and the remaining used by industry. Moreover, according to FAO estimates, by 2050 agricultural production has to increase by 60% to satisfy th…

Food securityDeficit irrigationIrrigation schedulingAgricultural engineeringAgricultural and Biological Sciences (miscellaneous)Water resourcesAgricoltura irrigua sostenibileSustainable managementSustainable irrigated agricultureSustainabilitySustainable agricultureController (irrigation)Environmental scienceSettore AGR/08 - Idraulica Agraria E Sistemazioni Idraulico-ForestaliWater Science and TechnologyCivil and Structural Engineering
researchProduct

Catalytic hydrothermal liquefaction of municipal sludge assisted by formic acid for the production of next-generation fuels

2021

Abstract Hydrothermal liquefaction (HTL) of municipal sludge (MS) was studied at 325 °C and 30 min at 10 and 30% w/w concentration of MS using formic acid (FA) as a green liquid hydrogen donor both in the absence and in the presence of heterogeneous catalysts. Pellets of commercial NiMo/Al2O3, CoMo/Al2O3 and felt of activated carbon ACF 1600 were used as catalysts. The addition of FA at high MS loading allowed to increase the yields in BC from 41 to 62% and its H/C ratio from 1.80 to 2.01 leading to energy recovery (ER) higher than 100%.When heterogeneous catalysts were used together with FA, a marked improvement of BC yields and quality was obtained at 10% MS loading. This behavior was not…

Formic acidPelletsFormic acidHeterogeneous catalysisHeterogeneous catalystIndustrial and Manufacturing EngineeringCatalysischemistry.chemical_compoundmedicineElectrical and Electronic EngineeringHydrogen donorMunicipal sludgeCivil and Structural EngineeringFoulingChemistryMechanical EngineeringBuilding and ConstructionSettore ING-IND/27 - Chimica Industriale E TecnologicaBiorefineryPollutionBiorefineryHydrothermal liquefactionGeneral EnergyHydrothermal liquefactionActivated carbonmedicine.drugNuclear chemistryEnergy
researchProduct

Masonry structures: A proposal of analytical generation of fragility functions for tsunami impact – Application to the Mediterranean coasts

2021

Abstract Evaluation of tsunami vulnerability of coastal buildings is gaining high interest in recent years in the areas with high tsunami hazard. Fragility evaluation is a fundamental step to obtain a quantitative estimation of the probability of building damage and in order to define possible strategies for risk mitigation. Several empirical fragility curves are available for masonry structures. However, an empirical fragility curve is generally based on field surveys after tsunami events, not always available. Conversely, analytical fragility curves are based on prediction approaches. In this paper, a proposal for the evaluation of analytical fragility curves for masonry structures typica…

Fragility curvesHigh interestbusiness.industryMonte Carlo method0211 other engineering and technologiesVulnerability020101 civil engineering02 engineering and technologyMasonryCivil engineering0201 civil engineeringSettore ICAR/09 - Tecnica Delle CostruzioniFragilityTsunami loadsTsunami hazardTsunami fragility functions021105 building & constructionMasonry structuresbusinessRisk managementGeologyCivil and Structural Engineering
researchProduct

Exact frequency response of bars with multiple dampers

2016

The paper addresses the frequency analysis of bars with an arbitrary number of dampers, subjected to harmonically varying loads. Multiple external/internal dampers occurring at the same position along the bar, modelling external damping devices and internal damping due to damage or imperfect connections, are considered. In this context, the challenge is to handle simultaneous discontinuities of the response variables, i.e. axial force/displacement discontinuities at the location of external/internal dampers. Based on the theory of generalized functions, the paper will present exact closed-form expressions of the frequency response under point/polynomial loads, which hold regardless of the n…

Frequency responseComputer sciencebusiness.industryBar (music)Mechanical EngineeringComputational MechanicsTruss020101 civil engineeringContext (language use)02 engineering and technologyStructural engineeringClassification of discontinuitiesDisplacement (vector)0201 civil engineeringDamper020303 mechanical engineering & transports0203 mechanical engineeringEuler-Bernoulli Beam Dynamic Green’s Function Frequency Response Function Kelvin-Voigt viscoelasticityControl theoryPosition (vector)business
researchProduct

Experimental and Numerical Study on the Flow Field and Friction Factor in a Pressurized Corrugated Pipe

2015

An experimental campaign including measurement of pressure drops and velocity profiles was conducted on the pressurized flow in a commercial corrugated pipe. The results show that the empirical graphs suggested by Morris in the fifties may produce inaccurate assessments of the friction factor, in particular, for low Reynolds numbers. The experimental data was then reproduced by means of a numerical model with the large eddy simulation (LES) technique. The friction factor behavior for low and relatively high Reynolds numbers was thus investigated. The numerical simulations were in good agreement with the experimental results, showing the LES suitability to predict the effect of the pipe wall…

Friction factorEngineeringCorrugated pipeMean squared errorbusiness.industryMechanical EngineeringLarge eddy simulationExperimental dataReynolds numberMechanicsReynolds stressLaboratory experimentSettore ICAR/01 - IdraulicaPhysics::Fluid DynamicsFriction factorsymbols.namesakePressurized flowRange (statistics)symbolsGeotechnical engineeringMean flowbusinessWater Science and TechnologyCivil and Structural EngineeringLarge eddy simulationJournal of Hydraulic Engineering
researchProduct