Search results for "Structural engineering"
showing 10 items of 1998 documents
An Analytical Tire Model with Flexible Carcass for Combined Slips
2014
Published version of an article in the journal: Mathematical Problems in Engineering. Also available from the publisher at: http://dx.doi.org/10.1155/2014/397538 The tire mechanical characteristics under combined cornering and braking/driving situations have significant effects on vehicle directional controls. The objective of this paper is to present an analytical tire model with flexible carcass for combined slip situations, which can describe tire behavior well and can also be used for studying vehicle dynamics. The tire forces and moments come mainly from the shear stress and sliding friction at the tread-road interface. In order to describe complicated tire characteristics and tire-roa…
Increasing the Capacity of Existing Bridges by Using Unbonded Prestressing Technology: A Case Study
2014
External posttensioning or unbonded prestressing was found to be a powerful tool for retrofitting and for increasing the life extension of existing structures. Since the 1950s, this technique of reinforcement was applied with success to bridge structures in many countries, and was found to provide an efficient and economic solution for a wide range of bridge types and conditions. Unbonded prestressing is defined as a system in which the post-tensioning tendons or bars are located outside the concrete cross-section and the prestressing forces are transmitted to the girder through the end anchorages, deviators, or saddles. In response to the demand for a faster and more efficient transportati…
Structural Health Monitoring Procedure for Composite Structures through the use of Artificial Neural Networks
2015
In this paper different architectures of Artificial Neural Networks (ANNs) for structural damage detection are studied. The main objective is to investigate an ANN able to detect and localize damage without any prior knowledge on its characteristics so as to serve as a real-time data processor for Structural Health Monitoring (SHM) systems. Two different architectures are studied: the standard feed-forward Multi Layer Perceptron (MLP) and the Radial Basis Function (RBF) ANNs. The training data are given, in terms of a Damage Index ℑD, properly defined using a piezoelectric sensor signal output to obtain suitable information on the damage position and dimensions. The electromechanical respon…
Load forecast on intelligent buildings based on temporary occupancy monitoring
2016
The modeling of energy consumption in buildings must consider occupancy as a relevant input, since it plays a very important role in the overall building's energy consumption. Frequently, buildings lack of permanent occupancy monitoring solutions. However, they may include data sources that are correlated with real building occupancy. This study proposes a new methodology for energy consumption modeling, supported by these alternative data sources, such as the number of vehicles in a parking lot. The aim is to mitigate investment in permanent occupancy monitoring solutions. The proposed methodology makes use of short-term real occupancy monitoring for model fitting, to enable the developmen…
Integrated emitter local loss prediction using artificial neural networks.
2010
This paper describes an application of artificial neural networks (ANNs) to the prediction of local losses from integrated emitters. First, the optimum input-output combination was determined. Then, the mapping capability of ANNs and regression models was compared. Afterwards, a five-input ANN model, which considers pipe and emitter internal diameter, emitter length, emitter spacing, and pipe discharge, was used to develop a local losses predicting tool which was obtained from different training strategies while taking into account a completely independent test set. Finally, a performance index was evaluated for the test emitter models studied. Emitter data with low reliability were removed…
An Intelligent Tool to Predict Fracture in Sheet Metal Forming Operations
2007
One of the main issues in sheet metal forming operations design is the determination of formability limits in order to prevent necking and fracture. In fact, the ability to predict fracture represents a powerful tool to improve the production quality in mechanical industry. Many researchers investigated the problem here addressed, mainly studying forming limit diagrams (FLD) or developing fracture criteria which are able to foresee fracture defects for different processes. In this paper, the author present some early results of a research project focused on the application of artificial intelligence (AI) for ductile fracture prediction in sheet metal forming operations. The main advantage o…
Multicriteria performance analysis of an integrated urban wastewater system for energy management
2017
AbstractThe optimization and management of an integrated urban wastewater system is a complex problem involving many processes and variables. The possible control options are defined by several management strategies that may differently impact the economic, operational or environmental performance of the system. The present paper aims to contribute to the environmental and energy sustainability of urban wastewater systems by means of a multicriteria performance analysis. The paper begins with a complete analysis of the system performance in several fields of interest (energy, environment, quality of service, operation, economy and financial resources), and it highlights the management stren…
Experimental analysis of occupational whole-body vibration exposure of agricultural tractor with large square baler
2015
Abstract This study investigates longitudinal whole-body vibration in agricultural tractors powering a large square baler. The aim is to test the hypothesis that four-wheel drive has an influence on the longitudinal dynamic response. A number of experimental measurements are carried out on a specific vehicle combination driving uphill and downhill. The whole-body vibration exposure is measured at the operator seat under different conditions. The statistic results show a significant difference on the whole-body vibration exposure depending on operating conditions. Driving uphill and downhill with four-wheel drive activated showed the highest difference with increased vibration level at downh…
Seismic response of braced frames with and without friction dampers
1995
Abstract The dynamic response of friction damped bracing systems and ordinary cross-bracing systems inserted into surrounding frames without lateral stiffness is analysed in order to compare the typical behaviour of the two different bracing systems. The cyclic force-displacement relationship in the two cases is accurately modelled on the basis of experimental and related numerical models which are available in the literature, and the structural dimensionless parameters defining the shapes of the cycles are stressed. Systems having the same average period of vibration in the elastic phase of the response are assumed to be comparable with one another, which leads to a relationship linking th…
Viscoelastic bearings with fractional constitutive law for fractional tuned mass dampers
2015
Abstract The paper aims at studying the effects of the inherent fractional constitutive law of viscoelastic bearings used as devices for tuned mass dampers. First, the proper constitutive law of the viscoelastic supports is determined by the local constitutive law. Then, the characteristic force–displacement relationship at the top of the bearing is found. Taking advantage of the whole bearing constitutive laws, the tuning of the mass damper is proposed by defining the damped fractional frequency, which is analogous to the classical damped frequency. The effectiveness of the optimal tuning procedure is validated by a numerical application on a system subjected to a Gaussian white noise.