Search results for "Sub-ballast"

Optimization of the Mix-Design System for the Sub-ballast Railroad

2017

Bituminous sub-ballast is an alternative solution to the unbound granular sub-ballast used in the railway track due to several benefits that it can provide. Indeed, it contributes to maintain the moisture content in the subgrade unchanged during all year. This decreases the subgrade deterioration process. Moreover, the presence of bituminous sub-ballast can also reduce vertical stiffness variations on the track; it can have a positive effect in the maintenance needs at transition sections (bridge-embankment) and in the attenuation of the vibrations induced by the rail traffic. Despite the importance of the presence of the bituminous sub-ballast to conceive the construction and/or rehabilita…

THE RESISTANCE TO FATIGUE OF DRY ASPHALT RUBBER CONCRETE FOR SUB-BALLAST LAYER

2015

The more and more frequent use of recycled materials within the road and railway infrastructures is now an irreversible trend. In this area the use of Dry Asphalt Rubber Concrete (DARC) in sub-ballast layer seems to be a suitable technique to reach high mechanical and environmental performance even if such material should be analyzed over a long time horizon. This paper presents the results of experimental research focused on the resistance to fatigue of Dry Asphalt Rubber Concrete in sub-ballast layers; the survey has been carried out using four-point bending test (4pbt) on mixture samples with different rubber contents. The results of fatigue in DARC have been compared with the performanc…

Mechanical characterisation and 3D fractional viscoelastic modelling of railway sub-ballast rubberised asphalt

A Dynamic Model of Ballasted Rail Track with Bituminous Sub-Ballast Layer

2012

AbstractThe bituminous sub-ballast layer within the ballasted rail track allows some mechanical and environmental advantages. An analytical model of a ballasted rail track with sub-ballast layer has been proposed by considering the rail as viscous-elastic continuous beam discretely supported, at four levels of elasticity.The model was used to compare the mechanical performance of both ballasted track with and without bituminous sub-ballast layer. The results confirmed that the bituminous sub-ballast layer reduces the dynamic forces on the ground and achieves the technical objectives as reduction of ground borne vibrations and increase of the design life of the rail track.

DAMPING AND MECHANICAL PROPERTIES OF DRY ASPHALT RUBBER FOR SUB-BALLAST LAYERS

2011

The passage of railway lines through a town or near built-up areas poses serious environmental problems such as noise and vibration. Consequently railway companies have shown an increasing interest in developing new materials with high mechanical and environmental performance. This paper presents the results of an experimental research on the potential application of Dry Asphalt Rubber (DAR) in sub-ballast layers by measuring its damping and mechanical properties. An experimental survey based on four point bending and Marshall tests was carried to measure the stiffness modulus and damping ratio both of a standard bituminous mixture and of dry asphalt rubber mixture with a rubber content equ…

Characterization of rubberized asphalt for railway sub-ballast. Improvements in the mix-design, performance features and rational methodology of HMA_…

2018

(STR) can be incorporated into asphalt mixtures in two different methods, which are referred to as the wet-dry process. The blending of recycled rubber (CRM) with asphalt has been used for years, and several manufacturing processes have been developed in Europe as well as in the USA. The use of a bituminous sub-ballast layer has been pointed out as an exciting alternative to the granular sub-ballast design traditionally applied in most railroad tracks. Frequently, unbound granular materials are replaced by bituminous sub-ballast that provide additional benefits to the subgrade protection. Much research has been conducted on finding other alternative material to be used as a modifier in asph…

CHARACTERIZATION OF RUBBERIZED ASPHALT FOR RAILWAY SUB-BALLASTS

Tesi di dottorato sotto la supervisione del professore Gaetano di Mino del Dipartimento di Ingegneria Civile di Palermo), come borsista Marie-Curie all'interno del progetto SUPRITN 2013/2017. Il mio lavoro e la linea della ricerca riguarda i conglomerati bituminosi con granulato di gomma per lo strato di sub-ballast nelle linee ferroviarie. L’attività di ricerca comprende il mix-design dell’asfalto con aggiunta di gomma, la caratterizzazione e le prestazioni per la ferrovia in termini di comportamento meccanico e lo smorzamento delle vibrazioni. In particolare con l’avvento dell’alta velocità, diversi studi hanno evidenziato ottime caratteristiche fisico-meccaniche per ciò che riguarda il c…

Experimental Survey on Dry Asphalt Rubber Concrete for Sub-ballast Layers

2012

The railway traffic through a town or near built-up areas causes heavy effects such as noise and vibration on surroundings. In order to minimize the level of these impacts the railway companies with researchers and practitioners seek suitable solutions especially in the field of the rail-track because the main source of the ground borne vibrations and noise is the bad wheel-track contact. In particular, a big effort is addressed to new materials with high mechanical and environmental performance that can be utilized within the sub-ballast layer. This paper presents the results of an experimental survey on the potential application of Dry Asphalt Rubber Concrete (DARC) in sub-ballast layers …

Increased Stability of Rubber-Modified Asphalt Mixtures to Swelling, Expansion and Rebound Effect during Post-Compaction

2017

The application of bituminous mixtures modified with rubber from scrap-tires require attention and care during mixing and compaction. Rubber modifies the properties because it reacts in the internal structure of bitumen at high temperatures changing the performance of the mixture (interaction process of solvents with binder-rubber aggregate). The main change is the increasing of the viscosity and elasticity of the binder due to the larger sizes of the rubber particles by dry process but, this positive effect is counteracted by short mixing times, compared to wet technology, and due to the transport processes, curing time and post-compaction of the mixtures. Therefore, negative effects as sw…

Procedure for a Temperature-Traffic Model on Rubberized Asphalt Layers for Roads and Railways

2017

The impact of temperature on the mechanical properties and thermal susceptibility of the railway bituminous sub-ballast layer, has served as motivation to develop the advanced measurement of thermal cycles in this layer and, an evaluation of the average seasonal temperatures interpolated by sinusoidal functions, of which characteristic parameters are determined. According to weather situation, Barber’s temperature model was used to prove the effectiveness for the railway superstructure. It is included the assessment of improved modified asphalt mixes performed with coarse rubber from scrap tires, having 1.5 to 3 percent of crumb rubber (particle size 0.2-4 mm) by weight of the total mix, as…