Search results for "Surfaces and interfaces"
showing 10 items of 939 documents
Correlation between surface forces and surface reactivity in the setting of plaster by atomic force microscopy
2000
Abstract The setting of mineral binders (cement, plaster, etc.) arises as a direct consequence of surface reactivity by a process of dissociation and rehydration. This transformation induces a complete change of surface forces, of which the nature remains still unknown. The general process of the setting has been studied by means of plaster (CaSO 4 ·0.5H 2 O) crystals, chosen for an experimental convenience. The surface alteration (growth, dissolution, atomic resolution) of the plaster crystal with respect to the introduction of the calcium sulfate solution has been followed by using atomic force microscopy (AFM. Alternatively, this apparatus has been adapted by gluing a plaster microcrysta…
XPS study of supported gold catalysts:the role of Au0 and Au+? species as active sites.
2006
Gold nanoparticles supported on different oxides (SiO2, CeO2 and TiO2) were prepared by the SMAD (solvated metal atom dispersion) and deposition–precipitation (DP) techniques. The physical and chemical characterization of the catalysts was performed by X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD) and the catalytic activity was tested during the reaction of low temperature CO oxidation. The structural and surface analyses evidenced the presence of small gold crystallites (cluster size ∼2–5 nm) in all the SMAD-prepared samples and oxidized gold species in the case of the DP catalysts. A different surface distribution of ionic gold species was found on the different suppo…
Platinum-doped CeO2 thin film catalysts prepared by magnetron sputtering.
2010
The interaction of Pt with CeO(2) layers was investigated by using photoelectron spectroscopy. The 30 nm thick Pt doped CeO(2) layers were deposited simultaneously by rf-magnetron sputtering on a Si(001) substrate, multiwall carbon nanotubes (CNTs) supported by a carbon diffusion layer of a polymer membrane fuel cell and on CNTs grown on the silicon wafer by the CVD technique. The synchrotron radiation X-ray photoelectron spectra showed the formation of cerium oxide with completely ionized Pt(2+,4+) species, and with the Pt(2+)/Pt(4+) ratio strongly dependent on the substrate. The TEM and XRD study showed the Pt(2+)/Pt(4+) ratio is dependent on the film structure.
MOCVD growth of porous cerium oxide thin films on silicon substrate
2015
Abstract Porous cerium oxide thin films were grown by pulsed direct liquid injection metal organic chemical vapor deposition (DLI-MOCVD) on silicon substrate, using cerium tetrakis (1-methoxy-2-methyl-2-propanolate) dissolved in cyclohexane as precursor as well as oxygen as oxidant agent. The chemical and morphological characteristics of the films were investigated by XPS, SEM and TEM. The influence of the growth conditions on the morphological features of the thin films and the cerium chemical states are reported and discussed. The decrease of the oxygen and/or alkoxide flow rate induces the decrease of both the film thickness and the porosity of the layer. Moreover, the growth of silicate…
Nanocarriers for antioxidant resveratrol: formulation approach, vesicle self-assembly and stability evaluation.
2013
In this work we studied various nanoformulations of resveratrol in phospholipid vesicles. Conventional phophatidylcholine liposomes were prepared and characterized in parallel with PEVs (Penetration Enhancer-containing Vesicles) obtained by adding one of eight selected amphiphilic penetration enhancers (PEs; 0.2% w/v; HLB range 1-16) to the composition. All vesicles were around 100 nm, negatively charged (∼-30 mV) and able to incorporate resveratrol in good yields (>74%). The structure and the lamellar self-organization of the vesicles were investigated by Transmission Electron Microscopy (TEM) and Small and Wide Angle X-ray Scattering (SWAXS). These analyses showed that the lamellarity of …
Low temperature plasma treatment of monomolecular Langmuir-Blodgett films
1993
Abstract The structure of the surface layer of materials is usually quite different from the bulk. Detailed information about the surface structure is often not available. This, together with the complex nature of low temperature plasma treatment, hinders the investigations of plasma chemical processes on solid surfaces. Monomolecular Langmuir-Blodgett (LB) structures offer a unique opportunity to prepare model surfaces with known thickness and molecular architecture. From the data obtained, the depth of the Ar plasma influence on solid organic surfaces was estimated to be about 400–1000 A depending on the nature of the surface layer. An oxygen plasma penetrates deeper with a penetration li…
The kinetic MC modelling of reversible pattern formation in initial stages of thin metallic film growth on crystalline substrates
2003
Abstract The results of kinetic MC simulations of the reversible pattern formation during the adsorption of mobile metal atoms on crystalline substrates are discussed. Pattern formation, simulated for submonolayer metal coverage, is characterized in terms of the joint correlation functions for a spatial distribution of adsorbed atoms. A wide range of situations, from the almost irreversible to strongly reversible regimes, is simulated. We demonstrate that the patterns obtained are defined by a key dimensionless parameter: the ratio of the mutual attraction energy between atoms to the substrate temperature. Our ab initio calculations for the nearest Ag–Ag adsorbate atom interaction on an MgO…
The adhesion properties of the Ag/α-Al2O3() interface: an ab initio study
2002
Ab initio computer simulations of the atomic and electronic structure of the Ag/a-Al2O3(0 0 0 1) (corundum) interface have been performed for a periodic two-dimensional slab model using the Hartree–Fock method and a posteriori electron correlation corrections.We have considered both Al- and O-terminated corundum substrate surfaces.The dependence of the adhesion energy on the interfacial distance has been analyzed for the two most favorable Ag adsorption positions over corundum and for two different metal coverages (a 1/3 monolayer (ML) of the Ag(1 1 1) crystallographic plane and a full Ag(1 1 1) monolayer).The two different terminations (Al- and O-) give rise to qualitatively different resu…
Metal film growth on regular and defective MgO(001) surface: A comparative ab initio simulation and thermodynamic study
2006
Abstract In order to understand the difference in metallic film growth modes on perfect and defective oxide substrates, we have combined ab initio B3LYP periodic calculations on the slab models of the corresponding Me/MgO(0 0 1) interfaces (Me = Ag, Cu) with thermodynamic theory of solid solutions. For a defectless magnesia surface, we confirm the experimentally observed submonolayer growth of 3D metallic islands (Ag possesses a higher trend than Cu). Formation of Fs centers (neutral O vacancies) on the substrate markedly enhances metal atom adsorption as compared to physisorption over regular sites on a defect-free substrate. For the first time, we predict that the presence of these surfac…
Quantitative phase analysis and thickness measurement of surface-oxide layers in metal and alloy powders by the chemical-granular method
1998
The principles of the chemical-granular analysis of metal and alloy powders are reviewed and the results are compared with those provided by the spectroscopic analytical techniques XPS, AES and SIMS, including ion etching in their depth-profiling mode, when they are applied to the same materials. Several examples are analysed and it is shown that the chemical-granular method alone can provide the very same information as depth profiling. However, it is averaged over a macroscopic powder sample in contrast to one or a few single particles. Nevertheless, it is the combination of the chemical-granular and depth-profiling analyses that really provides an unparalleled description in quantitative…